Robot Framework User Guide

Version 7.1.1

Copyright © 2008-2015 Nokia Networks
Copyright © 2016- Robot Framework Foundation

Table of Contents

1   Getting started

1.1   Introduction

Robot Framework is a Python-based, extensible keyword-driven automation framework for acceptance testing, acceptance test driven development (ATDD), behavior driven development (BDD) and robotic process automation (RPA). It can be used in distributed, heterogeneous environments, where automation requires using different technologies and interfaces.

The framework has a rich ecosystem around it consisting of various generic libraries and tools that are developed as separate projects. For more information about Robot Framework and the ecosystem, see http://robotframework.org.

Robot Framework is open source software released under the Apache License 2.0. Its development is sponsored by the Robot Framework Foundation.

Note

The official RPA support was added in Robot Framework 3.1. This User Guide still talks mainly about creating tests, test data, and test libraries, but same concepts apply also when creating tasks.

1.1.1   Why Robot Framework?

  • Enables easy-to-use tabular syntax for creating test cases in a uniform way.
  • Provides ability to create reusable higher-level keywords from the existing keywords.
  • Provides easy-to-read result reports and logs in HTML format.
  • Is platform and application independent.
  • Provides a simple library API for creating customized test libraries which can be implemented natively with Python.
  • Provides a command line interface and XML based output files for integration into existing build infrastructure (continuous integration systems).
  • Provides support for testing web applications, rest APIs, mobile applications, running processes, connecting to remote systems via Telnet or SSH, and so on.
  • Supports creating data-driven test cases.
  • Has built-in support for variables, practical particularly for testing in different environments.
  • Provides tagging to categorize and select test cases to be executed.
  • Enables easy integration with source control: test suites are just files and directories that can be versioned with the production code.
  • Provides test-case and test-suite -level setup and teardown.
  • The modular architecture supports creating tests even for applications with several diverse interfaces.

1.1.2   High-level architecture

Robot Framework is a generic, application and technology independent framework. It has a highly modular architecture illustrated in the diagram below.

src/GettingStarted/architecture.png

Robot Framework architecture

The test data is in simple, easy-to-edit tabular format. When Robot Framework is started, it processes the data, executes test cases and generates logs and reports. The core framework does not know anything about the target under test, and the interaction with it is handled by libraries. Libraries can either use application interfaces directly or use lower level test tools as drivers.

1.1.3   Screenshots

Following screenshots show examples of the test data and created reports and logs.

src/GettingStarted/testdata_screenshots.png

Test case file

src/GettingStarted/screenshots.png

Reports and logs

1.1.4   Getting more information

Project pages

The number one place to find more information about Robot Framework and the rich ecosystem around it is http://robotframework.org. Robot Framework itself is hosted on GitHub.

Mailing lists

There are several Robot Framework mailing lists where to ask and search for more information. The mailing list archives are open for everyone (including the search engines) and everyone can also join these lists freely. Only list members can send mails, though, and to prevent spam new users are moderated which means that it might take a little time before your first message goes through. Do not be afraid to send question to mailing lists but remember How To Ask Questions The Smart Way.

robotframework-users
General discussion about all Robot Framework related issues. Questions and problems can be sent to this list. Used also for information sharing for all users.
robotframework-announce
An announcements-only mailing list where only moderators can send messages. All announcements are sent also to the robotframework-users mailing list so there is no need to join both lists.
robotframework-devel
Discussion about Robot Framework development.

1.3   Installation instructions

These instructions cover installing Robot Framework and its preconditions on different operating systems. If you already have Python installed, you can install Robot Framework using the standard package manager pip:

pip install robotframework

1.3.1   Python installation

Robot Framework is implemented using Python, and a precondition to install it is having Python or its alternative implementation PyPy installed. Another recommended precondition is having the pip package manager available.

Robot Framework requires Python 3.8 or newer. The latest version that supports Python 3.6 and 3.7 is Robot Framework 6.1.1. If you need to use Python 2, Jython or IronPython, you can use Robot Framework 4.1.3.

Installing Python on Linux

On Linux you should have suitable Python installation with pip available by default. If not, you need to consult your distributions documentation to learn how to install them. This is also true if you want to use some other Python version than the one provided by your distribution by default.

To check what Python version you have installed, you can run python --version command in a terminal:

$ python --version
Python 3.10.13

Notice that if your distribution provides also older Python 2, running python may use that. To use Python 3, you can use python3 command or even more version specific command like python3.8. You need to use these version specific variants also if you have multiple Python 3 versions installed and need to pinpoint which one to use:

$ python3.11 --version
Python 3.11.7
$ python3.12 --version
Python 3.12.1

Installing Robot Framework directly under the system provided Python has a risk that possible problems can affect the whole Python installation used also by the operating system itself. Nowadays Linux distributions typically use user installs by default to avoid such problems, but users can also themselves decide to use virtual environments.

Installing Python on Windows

On Windows Python is not available by default, but it is easy to install. The recommended way to install it is using the official Windows installers available at http://python.org. For other alternatives, such as installing from the Microsoft Store, see the official Python documentation.

When installing Python on Windows, it is recommended to add Python to PATH to make it and tools like pip and Robot Framework easier to execute from the command line. When using the official installer, you just need to select the Add Python 3.x to PATH checkbox on the first dialog.

To make sure Python installation has been successful and Python has been added to PATH, you can open the command prompt and execute python --version:

C:\>python --version
Python 3.10.9

If you install multiple Python versions on Windows, the version that is used when you execute python is the one first in PATH. If you need to use others, the easiest way is using the py launcher:

C:\>py --version
Python 3.10.9
C:\>py -3.12 --version
Python 3.12.1

Installing Python on macOS

MacOS does not provide Python 3 compatible Python version by default, so it needs to be installed separately. The recommended approach is using the official macOS installers available at http://python.org. If you are using a package manager like Homebrew, installing Python via it is possible as well.

You can validate Python installation on macOS using python --version like on other operating systems.

PyPy installation

PyPy is an alternative Python implementation. Its main advantage over the standard Python implementation is that it can be faster and use less memory, but this depends on the context where and how it is used. If execution speed is important, at least testing PyPy is probably a good idea.

Installing PyPy is a straightforward procedure and you can find both installers and installation instructions at http://pypy.org. To validate that PyPy installation was successful, run pypy --version or pypy3 --version.

Note

Using Robot Framework with PyPy is officially supported only on Linux.

Configuring PATH

The PATH environment variable lists directories where commands executed in a system are searched from. To make using Python, pip and Robot Framework easier from the command line, it is recommended to add the Python installation directory as well as the directory where commands like pip and robot are installed into PATH.

When using Python on Linux or macOS, Python and tools installed with it should be automatically in PATH. If you nevertheless need to update PATH, you typically need to edit some system wide or user specific configuration file. Which file to edit and how depends on the operating system and you need to consult its documentation for more details.

On Windows the easiest way to make sure PATH is configured correctly is setting the Add Python 3.x to PATH checkbox when running the installer. To manually modify PATH on Windows, follow these steps:

  1. Find Environment Variables under Settings. There are variables affecting the whole system and variables affecting only the current user. Modifying the former will require admin rights, but modifying the latter is typically enough.
  2. Select PATH (often written like Path) and click Edit. If you are editing user variables and PATH does not exist, click New instead.
  3. Add both the Python installation directory and the Scripts directory under the installation directory into PATH.
  4. Exit the dialog with Ok to save the changes.
  5. Start a new command prompt for the changes to take effect.

1.3.2   Installing using pip

These instructions cover installing Robot Framework using pip, the standard Python package manager. If you are using some other package manager like Conda, you can use it instead but need to study its documentation for instructions.

When installing Python, you typically get pip installed automatically. If that is not the case, you need to check the documentation of that Python installation for instructions how to install it separately.

Running pip command

Typically you use pip by running the pip command, but on Linux you may need to use pip3 or even more Python version specific variant like pip3.8 instead. When running pip or any of its variants, the pip version that is found first in PATH will be used. If you have multiple Python versions installed, you may need to pinpoint which exact version you want to use. This is typically easiest done by running python -m pip and substituting python with the Python version you want to use.

To make sure you have pip available, you can run pip --version or equivalent.

Examples on Linux:

$ pip --version
pip 23.2.1 from ... (python 3.10)
$ python3.12 -m pip --version
pip 23.3.1 from ... (python 3.12)

Examples on Windows:

C:\> pip --version
pip 23.2.1 from ... (python 3.10)
C:\> py -m 3.12 -m pip --version
pip 23.3.2 from ... (python 3.12)

In the subsequent sections pip is always run using the pip command. You may need to use some of the other approaches explained above in your environment.

Installing and uninstalling Robot Framework

The easiest way to use pip is by letting it find and download packages it installs from the Python Package Index (PyPI), but it can also install packages downloaded from the PyPI separately. The most common usages are shown below and pip documentation has more information and examples.

# Install the latest version (does not upgrade)
pip install robotframework

# Upgrade to the latest stable version
pip install --upgrade robotframework

# Upgrade to the latest version even if it is a pre-release
pip install --upgrade --pre robotframework

# Install a specific version
pip install robotframework==7.0

# Install separately downloaded package (no network connection needed)
pip install robotframework-7.0-py3-none-any.whl

# Install latest (possibly unreleased) code directly from GitHub
pip install https://github.com/robotframework/robotframework/archive/master.zip

# Uninstall
pip uninstall robotframework

1.3.3   Installing from source

Another installation alternative is getting Robot Framework source code and installing it using the provided setup.py script. This approach is recommended only if you do not have pip available for some reason.

You can get the source code by downloading a source distribution as a zip package from PyPI and extracting it. An alternative is cloning the GitHub repository and checking out the needed release tag.

Once you have the source code, you can install it with the following command:

python setup.py install

The setup.py script accepts several arguments allowing, for example, installation into a non-default location that does not require administrative rights. It is also used for creating different distribution packages. Run python setup.py --help for more details.

1.3.4   Verifying installation

To make sure that the correct Robot Framework version has been installed, run the following command:

$ robot --version
Robot Framework 7.0 (Python 3.10.3 on linux)

If running these commands fails with a message saying that the command is not found or recognized, a good first step is double-checking the PATH configuration.

If you have installed Robot Framework under multiple Python versions, running robot will execute the one first in PATH. To select explicitly, you can run python -m robot and substitute python with the right Python version.

$ python3.12 -m robot --version
Robot Framework 7.0 (Python 3.12.1 on linux)

C:\>py -3.11 -m robot --version
Robot Framework 7.0 (Python 3.11.7 on win32)

1.3.5   Virtual environments

Python virtual environments allow Python packages to be installed in an isolated location for a particular system or application, rather than installing all packages into the same global location. They have two main use cases:

  • Install packages needed by different projects into their own environments. This avoids conflicts if projects need different versions of same packages.
  • Avoid installing everything under the global Python installation. This is especially important on Linux where the global Python installation may be used by the distribution itself and messing it up can cause severe problems.

1.4   Demonstrations

There are several demo projects that introduce Robot Framework and help getting started with it.

Quick Start Guide
Introduces the most important features of Robot Framework and acts as an executable demo.
Robot Framework demo
Simple example test cases. Demonstrates also creating custom test libraries.
Web testing demo
Demonstrates how to create tests and higher level keywords. The system under test is a simple web page that is tested using SeleniumLibrary.
ATDD with Robot Framework
Demonstrates how to use Robot Framework when following Acceptance Test Driven Development (ATDD) process.

2   Creating test data

2.1   Test data syntax

This section covers Robot Framework's overall test data syntax. The following sections will explain how to actually create test cases, test suites and so on. Although this section mostly uses term test, the same rules apply also when creating tasks.

2.1.1   Files and directories

The hierarchical structure for arranging test cases is built as follows:

  • Test cases are created in suite files.
  • A test case file automatically creates a test suite containing the test cases in that file.
  • A directory containing test case files forms a higher-level test suite. Such a suite directory has suites created from test case files as its child test suites.
  • A test suite directory can also contain other test suite directories, and this hierarchical structure can be as deeply nested as needed.
  • Test suite directories can have a special initialization file configuring the created test suite.

In addition to this, there are:

Test case files, test suite initialization files and resource files are all created using Robot Framework test data syntax. Test libraries and variable files are created using "real" programming languages, most often Python.

2.1.2   Test data sections

Robot Framework data is defined in different sections, often also called tables, listed below:

Different sections in data
Section Used for
Settings
2) Defining metadata for test suites and test cases.
Variables Defining variables that can be used elsewhere in the test data.
Test Cases Creating test cases from available keywords.
Tasks Creating tasks using available keywords. Single file can only contain either tests or tasks.
Keywords Creating user keywords from existing lower-level keywords
Comments Additional comments or data. Ignored by Robot Framework.

Different sections are recognized by their header row. The recommended header format is *** Settings ***, but the header is case-insensitive, surrounding spaces are optional, and the number of asterisk characters can vary as long as there is at least one asterisk in the beginning. For example, also *settings would be recognized as a section header.

Robot Framework supports also singular headers like *** Setting ***, but that support was deprecated in Robot Framework 6.0. There is a visible deprecation warning starting from Robot Framework 7.0 and singular headers will eventually not be supported at all.

The header row can contain also other data than the actual section header. The extra data must be separated from the section header using the data format dependent separator, typically two or more spaces. These extra headers are ignored at parsing time, but they can be used for documenting purposes. This is especially useful when creating test cases using the data-driven style.

Possible data before the first section is ignored.

Note

Section headers can be localized. See the Translations appendix for supported translations.

2.1.3   Supported file formats

The most common approach to create Robot Framework data is using the space separated format where pieces of the data, such as keywords and their arguments, are separated from each others with two or more spaces. An alternative is using the pipe separated format where the separator is the pipe character surrounded with spaces (|).

Suite files typically use the .robot extension, but what files are parsed can be configured. Resource files can use the .robot extension as well, but using the dedicated .resource extension is recommended and may be mandated in the future. Files containing non-ASCII characters must be saved using the UTF-8 encoding.

Robot Framework supports also reStructuredText files so that normal Robot Framework data is embedded into code blocks. Only files with the .robot.rst extension are parsed by default. If you would rather use just .rst or .rest extension, that needs to be configured separately.

Robot Framework data can also be created in the JSON format that is targeted more for tool developers than normal Robot Framework users. Only JSON files with the custom .rbt extension are parsed by default.

Earlier Robot Framework versions supported data also in HTML and TSV formats. The TSV format still works if the data is compatible with the space separated format, but the support for the HTML format has been removed altogether. If you encounter such data files, you need to convert them to the plain text format to be able to use them with Robot Framework 3.2 or newer. The easiest way to do that is using the Tidy tool, but you must use the version included with Robot Framework 3.1 because newer versions do not understand the HTML format at all.

Space separated format

When Robot Framework parses data, it first splits the data to lines and then lines to tokens such as keywords and arguments. When using the space separated format, the separator between tokens is two or more spaces or alternatively one or more tab characters. In addition to the normal ASCII space, any Unicode character considered to be a space (e.g. no-break space) works as a separator. The number of spaces used as separator can vary, as long as there are at least two, making it possible to align the data nicely in settings and elsewhere when it makes the data easier to understand.

*** Settings ***
Documentation     Example using the space separated format.
Library           OperatingSystem

*** Variables ***
${MESSAGE}        Hello, world!

*** Test Cases ***
My Test
    [Documentation]    Example test.
    Log    ${MESSAGE}
    My Keyword    ${CURDIR}

Another Test
    Should Be Equal    ${MESSAGE}    Hello, world!

*** Keywords ***
My Keyword
    [Arguments]    ${path}
    Directory Should Exist    ${path}

Because tabs and consecutive spaces are considered separators, they must be escaped if they are needed in keyword arguments or elsewhere in the actual data. It is possible to use special escape syntax like \t for tab and \xA0 for no-break space as well as built-in variables ${SPACE} and ${EMPTY}. See the Escaping section for details.

Tip

Although using two spaces as a separator is enough, it is recommended to use four spaces to make the separator easier to recognize.

Note

Prior to Robot Framework 3.2, non-ASCII spaces used in the data were converted to ASCII spaces during parsing. Nowadays all data is preserved as-is.

Pipe separated format

The biggest problem of the space delimited format is that visually separating keywords from arguments can be tricky. This is a problem especially if keywords take a lot of arguments and/or arguments contain spaces. In such cases the pipe delimited variant can work better because it makes the separator more visible.

One file can contain both space separated and pipe separated lines. Pipe separated lines are recognized by the mandatory leading pipe character, but the pipe at the end of the line is optional. There must always be at least one space or tab on both sides of the pipe except at the beginning and at the end of the line. There is no need to align the pipes, but that often makes the data easier to read.

| *** Settings ***   |
| Documentation      | Example using the pipe separated format.
| Library            | OperatingSystem

| *** Variables ***  |
| ${MESSAGE}         | Hello, world!

| *** Test Cases *** |                 |               |
| My Test            | [Documentation] | Example test. |
|                    | Log             | ${MESSAGE}    |
|                    | My Keyword      | ${CURDIR}     |
| Another Test       | Should Be Equal | ${MESSAGE}    | Hello, world!

| *** Keywords ***   |                        |         |
| My Keyword         | [Arguments]            | ${path} |
|                    | Directory Should Exist | ${path} |

When using the pipe separated format, consecutive spaces or tabs inside arguments do not need to be escaped. Similarly empty columns do not need to be escaped except if they are at the end. Possible pipes surrounded by spaces in the actual test data must be escaped with a backslash, though:

| *** Test Cases *** |                 |                 |                      |
| Escaping Pipe      | ${file count} = | Execute Command | ls -1 *.txt \| wc -l |
|                    | Should Be Equal | ${file count}   | 42                   |

Note

Preserving consecutive spaces and tabs in arguments is new in Robot Framework 3.2. Prior to it non-ASCII spaces used in the data were also converted to ASCII spaces.

reStructuredText format

reStructuredText (reST) is an easy-to-read plain text markup syntax that is commonly used for documentation of Python projects, including Python itself as well as this User Guide. reST documents are most often compiled to HTML, but also other output formats are supported. Using reST with Robot Framework allows you to mix richly formatted documents and test data in a concise text format that is easy to work with using simple text editors, diff tools, and source control systems.

Note

Using reStructuredText files with Robot Framework requires the Python docutils module to be installed.

When using Robot Framework with reStructuredText files, normal Robot Framework data is embedded to so called code blocks. In standard reST code blocks are marked using the code directive, but Robot Framework supports also code-block or sourcecode directives used by the Sphinx tool.

reStructuredText example
------------------------

This text is outside code blocks and thus ignored.

.. code:: robotframework

   *** Settings ***
   Documentation    Example using the reStructuredText format.
   Library          OperatingSystem

   *** Variables ***
   ${MESSAGE}       Hello, world!

   *** Test Cases ***
   My Test
       [Documentation]    Example test.
       Log    ${MESSAGE}
       My Keyword    ${CURDIR}

   Another Test
       Should Be Equal    ${MESSAGE}    Hello, world!

Also this text is outside code blocks and ignored. Code blocks not
containing Robot Framework data are ignored as well.

.. code:: robotframework

   # Both space and pipe separated formats are supported.

   | *** Keywords ***  |                        |         |
   | My Keyword        | [Arguments]            | ${path} |
   |                   | Directory Should Exist | ${path} |

.. code:: python

   # This code block is ignored.
   def example():
       print('Hello, world!')

Robot Framework supports reStructuredText files using .robot.rst, .rst and .rest extensions. To avoid parsing unrelated reStructuredText files, only files with the .robot.rst extension are parsed by default when executing a directory. Parsing files with other extensions can be enabled by using either --parseinclude or --extension option.

When Robot Framework parses reStructuredText files, errors below level SEVERE are ignored to avoid noise about possible non-standard directives and other such markup. This may hide also real errors, but they can be seen when processing files using reStructuredText tooling normally.

Note

Parsing .robot.rst files automatically is new in Robot Framework 6.1.

JSON format

Robot Framework supports data also in the JSON format. This format is designed more for tool developers than for regular Robot Framework users and it is not meant to be edited manually. Its most important use cases are:

  • Transferring data between processes and machines. A suite can be converted to JSON in one machine and recreated somewhere else.
  • Saving a suite, possibly a nested suite, constructed from normal Robot Framework data into a single JSON file that is faster to parse.
  • Alternative data format for external tools generating tests or tasks.

Note

The JSON data support is new in Robot Framework 6.1 and it can be enhanced in future Robot Framework versions. If you have an enhancement idea or believe you have encountered a bug, please submit an issue or start a discussion thread on the #devel channel on our Slack.

Converting suite to JSON

A suite structure can be serialized into JSON by using the TestSuite.to_json method. When used without arguments, it returns JSON data as a string, but it also accepts a path or an open file where to write JSON data along with configuration options related to JSON formatting:

from robot.running import TestSuite


# Create suite based on data on the file system.
suite = TestSuite.from_file_system('/path/to/data')

# Get JSON data as a string.
data = suite.to_json()

# Save JSON data to a file with custom indentation.
suite.to_json('data.rbt', indent=2)

If you would rather work with Python data and then convert that to JSON or some other format yourself, you can use TestSuite.to_dict instead.

Creating suite from JSON

A suite can be constructed from JSON data using the TestSuite.from_json method. It works both with JSON strings and paths to JSON files:

from robot.running import TestSuite


# Create suite from JSON data in a file.
suite = TestSuite.from_json('data.rbt')

# Create suite from a JSON string.
suite = TestSuite.from_json('{"name": "Suite", "tests": [{"name": "Test"}]}')

# Execute suite. Notice that log and report needs to be created separately.
suite.run(output='example.xml')

If you have data as a Python dictionary, you can use TestSuite.from_dict instead. Regardless of how a suite is recreated, it exists only in memory and original data files on the file system are not recreated.

As the above example demonstrates, the created suite can be executed using the TestSuite.run method. It may, however, be easier to execute a JSON file directly as explained in the following section.

Executing JSON files

When executing tests or tasks using the robot command, JSON files with the custom .rbt extension are parsed automatically. This includes running individual JSON files like robot tests.rbt and running directories containing .rbt files. If you would rather use the standard .json extension, you need to configure which files are parsed.

Adjusting suite source

Suite source in the data got from TestSuite.to_json and TestSuite.to_dict is in absolute format. If a suite is recreated later on a different machine, the source may thus not match the directory structure on that machine. To avoid that, it is possible to use the TestSuite.adjust_source method to make the suite source relative before getting the data and add a correct root directory after the suite is recreated:

from robot.running import TestSuite


# Create a suite, adjust source and convert to JSON.
suite = TestSuite.from_file_system('/path/to/data')
suite.adjust_source(relative_to='/path/to')
suite.to_json('data.rbt')

# Recreate suite elsewhere and adjust source accordingly.
suite = TestSuite.from_json('data.rbt')
suite.adjust_source(root='/new/path/to')
JSON structure

Imports, variables and keywords created in suite files are included in the generated JSON along with tests and tasks. The exact JSON structure is documented in the running.json schema file.

2.1.4   Rules for parsing the data

Ignored data

When Robot Framework parses the test data files, it ignores:

  • All data before the first test data section.
  • Data in the Comments section.
  • All empty rows.
  • All empty cells at the end of rows when using the pipe separated format.
  • All single backslashes (\) when not used for escaping.
  • All characters following the hash character (#), when it is the first character of a cell. This means that hash marks can be used to enter comments in the test data.

When Robot Framework ignores some data, this data is not available in any resulting reports and, additionally, most tools used with Robot Framework also ignore them. To add information that is visible in Robot Framework outputs, place it to the documentation or other metadata of test cases or suites, or log it with the BuiltIn keywords Log or Comment.

Escaping

The escape character in Robot Framework test data is the backslash (\) and additionally built-in variables ${EMPTY} and ${SPACE} can often be used for escaping. Different escaping mechanisms are discussed in the sections below.

Escaping special characters

The backslash character can be used to escape special characters so that their literal values are used.

Escaping special characters
Character Meaning Examples
\$ Dollar sign, never starts a scalar variable. \${notvar}
\@ At sign, never starts a list variable. \@{notvar}
\& Ampersand, never starts a dictionary variable. \&{notvar}
\% Percent sign, never starts an environment variable. \%{notvar}
\# Hash sign, never starts a comment. \# not comment
\= Equal sign, never part of named argument syntax. not\=named
\| Pipe character, not a separator in the pipe separated format. ls -1 *.txt \| wc -l
\\ Backslash character, never escapes anything. c:\\temp, \\${var}
Forming escape sequences

The backslash character also allows creating special escape sequences that are recognized as characters that would otherwise be hard or impossible to create in the test data.

Escape sequences
Sequence Meaning Examples
\n Newline character. first line\n2nd line
\r Carriage return character text\rmore text
\t Tab character. text\tmore text
\xhh Character with hex value hh. null byte: \x00, ä: \xE4
\uhhhh Character with hex value hhhh. snowman: \u2603
\Uhhhhhhhh Character with hex value hhhhhhhh. love hotel: \U0001f3e9

Note

All strings created in the test data, including characters like \x02, are Unicode and must be explicitly converted to byte strings if needed. This can be done, for example, using Convert To Bytes or Encode String To Bytes keywords in BuiltIn and String libraries, respectively, or with something like value.encode('UTF-8') in Python code.

Note

If invalid hexadecimal values are used with \x, \u or \U escapes, the end result is the original value without the backslash character. For example, \xAX (not hex) and \U00110000 (too large value) result with xAX and U00110000, respectively. This behavior may change in the future, though.

Note

Built-in variable ${\n} can be used if operating system dependent line terminator is needed (\r\n on Windows and \n elsewhere).

Handling empty values

When using the space separated format, the number of spaces used as a separator can vary and thus empty values cannot be recognized unless they are escaped. Empty cells can be escaped either with the backslash character or with built-in variable ${EMPTY}. The latter is typically recommended as it is easier to understand.

*** Test Cases ***
Using backslash
    Do Something    first arg    \
    Do Something    \            second arg

Using ${EMPTY}
    Do Something    first arg    ${EMPTY}
    Do Something    ${EMPTY}     second arg

When using the pipe separated format, empty values need to be escaped only when they are at the end of the row:

| *** Test Cases *** |              |           |            |
| Using backslash    | Do Something | first arg | \          |
|                    | Do Something |           | second arg |
|                    |              |           |            |
| Using ${EMPTY}     | Do Something | first arg | ${EMPTY}   |
|                    | Do Something |           | second arg |
Handling spaces

Spaces, especially consecutive spaces, as part of arguments for keywords or needed otherwise are problematic for two reasons:

In these cases spaces need to be escaped. Similarly as when escaping empty values, it is possible to do that either by using the backslash character or by using the built-in variable ${SPACE}.

Escaping spaces examples
Escaping with backslash Escaping with ${SPACE} Notes
\ leading space ${SPACE}leading space  
trailing space \ trailing space${SPACE} Backslash must be after the space.
\ \ ${SPACE} Backslash needed on both sides.
consecutive \ \ spaces consecutive${SPACE * 3}spaces Using extended variable syntax.

As the above examples show, using the ${SPACE} variable often makes the test data easier to understand. It is especially handy in combination with the extended variable syntax when more than one space is needed.

Dividing data to several rows

If there is more data than readily fits a row, it is possible to split it and start continuing rows with ellipsis (...). Ellipses can be indented to match the indentation of the starting row and they must always be followed by the normal test data separator.

In most places split lines have exact same semantics as lines that are not split. Exceptions to this rule are suite, test and keyword documentation as well suite metadata. With them split values are automatically joined together with the newline character to ease creating multiline values.

The ... syntax allows also splitting variables in the Variable section. When long scalar variables (e.g. ${STRING}) are split to multiple rows, the final value is got by concatenating the rows together. The separator is a space by default, but that can be changed by starting the value with SEPARATOR=<sep>.

Splitting lines is illustrated in the following two examples containing exactly same data without and with splitting.

*** Settings ***
Documentation      Here we have documentation for this suite.\nDocumentation is often quite long.\n\nIt can also contain multiple paragraphs.
Default Tags       default tag 1    default tag 2    default tag 3    default tag 4    default tag 5

*** Variables ***
${STRING}          This is a long string. It has multiple sentences. It does not have newlines.
${MULTILINE}       This is a long multiline string.\nThis is the second line.\nThis is the third and the last line.
@{LIST}            this     list     is    quite    long     and    items in it can also be long
&{DICT}            first=This value is pretty long.    second=This value is even longer. It has two sentences.

*** Test Cases ***
Example
    [Tags]    you    probably    do    not    have    this    many    tags    in    real    life
    Do X    first argument    second argument    third argument    fourth argument    fifth argument    sixth argument
    ${var} =    Get X    first argument passed to this keyword is pretty long    second argument passed to this keyword is long too
*** Settings ***
Documentation      Here we have documentation for this suite.
...                Documentation is often quite long.
...
...                It can also contain multiple paragraphs.
Default Tags       default tag 1    default tag 2    default tag 3
...                default tag 4    default tag 5

*** Variables ***
${STRING}          This is a long string.
...                It has multiple sentences.
...                It does not have newlines.
${MULTILINE}       SEPARATOR=\n
...                This is a long multiline string.
...                This is the second line.
...                This is the third and the last line.
@{LIST}            this     list     is      quite    long     and
...                items in it can also be long
&{DICT}            first=This value is pretty long.
...                second=This value is even longer. It has two sentences.

*** Test Cases ***
Example
    [Tags]    you    probably    do    not    have    this    many
    ...       tags    in    real    life
    Do X    first argument    second argument    third argument
    ...    fourth argument    fifth argument    sixth argument
    ${var} =    Get X
    ...    first argument passed to this keyword is pretty long
    ...    second argument passed to this keyword is long too

2.1.5   Localization

Robot Framework localization efforts were started in Robot Framework 6.0 that allowed translation of section headers, settings, Given/When/Then prefixes used in Behavior Driven Development (BDD), and true and false strings used in automatic Boolean argument conversion. The plan is to extend localization support in the future, for example, to log and report and possibly also to control structures.

This section explains how to activate languages, what built-in languages are supported, how to create custom language files and how new translations can be contributed.

Enabling languages

Using command line option

The main mechanism to activate languages is specifying them from the command line using the --language option. When enabling built-in languages, it is possible to use either the language name like Finnish or the language code like fi. Both names and codes are case and space insensitive and also the hyphen (-) is ignored. To enable multiple languages, the --language option needs to be used multiple times:

robot --language Finnish testit.robot
robot --language pt --language ptbr testes.robot

The same --language option is also used when activating custom language files. With them the value can be either a path to the file or, if the file is in the module search path, the module name:

robot --language Custom.py tests.robot
robot --language MyLang tests.robot

For backwards compatibility reasons, and to support partial translations, English is always activated automatically. Future versions may allow disabling it.

Pre-file configuration

It is also possible to enable languages directly in data files by having a line Language: <value> (case-insensitive) before any of the section headers. The value after the colon is interpreted the same way as with the --language option:

Language: Finnish

*** Asetukset ***
Dokumentaatio        Example using Finnish.

If there is a need to enable multiple languages, the Language: line can be repeated. These configuration lines cannot be in comments so something like # Language: Finnish has no effect.

Due to technical limitations, the per-file language configuration affects also parsing subsequent files as well as the whole execution. This behavior is likely to change in the future and should not be relied upon. If you use per-file configuration, use it with all files or enable languages globally with the --language option.

Built-in languages

The following languages are supported out-of-the-box. Click the language name to see the actual translations:

All these translations have been provided by the awesome Robot Framework community. If a language you are interested in is not included, you can consider contributing it!

Custom language files

If a language you would need is not available as a built-in language, or you want to create a totally custom language for some specific need, you can easily create a custom language file. Language files are Python files that contain one or more language definitions that are all loaded when the language file is taken into use. Language definitions are created by extending the robot.api.Language base class and overriding class attributes as needed:

from robot.api import Language


class Example(Language):
    test_cases_header = 'Validations'
    tags_setting = 'Labels'
    given_prefixes = ['Assuming']
    true_strings = ['OK', '\N{THUMBS UP SIGN}']

Assuming the above code would be in file example.py, a path to that file or just the module name example could be used when the language file is activated.

The above example adds only some of the possible translations. That is fine because English is automatically enabled anyway. Most values must be specified as strings, but BDD prefixes and true/false strings allow more than one value and must be given as lists. For more examples, see Robot Framework's internal languages module that contains the Language class as well as all built-in language definitions.

Contributing translations

If you want to add translation for a new language or enhance existing, head to Crowdin that we use for collaboration. For more details, see the separate Localization project, and for questions and free discussion join the #localization channel on our Slack.

2.1.6   Style

Robot Framework syntax creates a simple programming language, and similarly as with other languages, it is important to think about the coding style. Robot Framework syntax is pretty flexible on purpose, but there are some generally recommended conventions:

  • Four space indentation.
  • Four space separation between keywords and arguments, settings and their values, etc... In some cases it makes sense to use more than four spaces. For example when aligning values in the Settings or Variables section or in data-driven style.
  • Global variables using capital letters like ${EXAMPLE} and local variables using lower-case letters like ${example}.
  • Consistency within a single file and preferably within the whole project.

One case where there currently is no strong convention is keyword capitalization. Robot Framework itself typically uses title case like Example Keyword in documentation and elsewhere, and this style is often used in Robot Framework data as well. It does not work too well with longer, sentence-like keywords such as Log into system as an admin, though.

Teams and organizations using Robot Framework should have their own coding standards. The community developed Robot Framework Style Guide is an excellent starting point that can be amended as needed. It is also possible to enforce these conventions by using the Robocop linter and the Robotidy code formatter.

2.2   Creating test cases

This section describes the overall test case syntax. Organizing test cases into test suites using suite files and suite directories is discussed in the next section.

When using Robot Framework for other automation purposes than test automation, it is recommended to create tasks instead of tests. The task syntax is for most parts identical to the test syntax, and the differences are explained in the Creating tasks section.

2.2.1   Test case syntax

Basic syntax

Test cases are constructed in test case sections from the available keywords. Keywords can be imported from test libraries or resource files, or created in the keyword section of the test case file itself.

The first column in the test case section contains test case names. A test case starts from the row with something in this column and continues to the next test case name or to the end of the section. It is an error to have something between the section headers and the first test.

The second column normally has keyword names. An exception to this rule is setting variables from keyword return values, when the second and possibly also the subsequent columns contain variable names and a keyword name is located after them. In either case, columns after the keyword name contain possible arguments to the specified keyword.

*** Test Cases ***
Valid Login
    Open Login Page
    Input Username    demo
    Input Password    mode
    Submit Credentials
    Welcome Page Should Be Open

Setting Variables
    Do Something    first argument    second argument
    ${value} =    Get Some Value
    Should Be Equal    ${value}    Expected value

Note

Although test case names can contain any character, using ? and especially * is not generally recommended because they are considered to be wildcards when selecting test cases. For example, trying to run only a test with name Example * like --test 'Example *' will actually run any test starting with Example.

Settings in the Test Case section

Test cases can also have their own settings. Setting names are always in the second column, where keywords normally are, and their values are in the subsequent columns. Setting names have square brackets around them to distinguish them from keywords. The available settings are listed below and explained later in this section.

[Documentation]
Used for specifying a test case documentation.
[Setup], [Teardown]
Specify test setup and teardown.
[Tags]
Used for tagging test cases.
[Template]
Specifies the template keyword to use. The test itself will contain only data to use as arguments to that keyword.
[Timeout]
Used for setting a test case timeout. Timeouts are discussed in their own section.

Note

Setting names are case-insensitive, but the format used above is recommended. Settings used to be also space-insensitive, but that was deprecated in Robot Framework 3.1 and trying to use something like [T a g s] causes an error in Robot Framework 3.2. Possible spaces between brackets and the name (e.g. [ Tags ]) are still allowed.

Example test case with settings:

*** Test Cases ***
Test With Settings
    [Documentation]    Another dummy test
    [Tags]    dummy    owner-johndoe
    Log    Hello, world!

2.2.2   Using arguments

The earlier examples have already demonstrated keywords taking different arguments, and this section discusses this important functionality more thoroughly. How to actually implement user keywords and library keywords with different arguments is discussed in separate sections.

Keywords can accept zero or more arguments, and some arguments may have default values. What arguments a keyword accepts depends on its implementation, and typically the best place to search this information is keyword's documentation. In the examples in this section the documentation is expected to be generated using the Libdoc tool, but the same information is available on documentation generated by generic documentation tools such as pydoc.

Positional arguments

Most keywords have a certain number of arguments that must always be given. In the keyword documentation this is denoted by specifying the argument names separated with a comma like first, second, third. The argument names actually do not matter in this case, except that they should explain what the argument does, but it is important to have exactly the same number of arguments as specified in the documentation. Using too few or too many arguments will result in an error.

The test below uses keywords Create Directory and Copy File from the OperatingSystem library. Their arguments are specified as path and source, destination, which means that they take one and two arguments, respectively. The last keyword, No Operation from BuiltIn, takes no arguments.

*** Test Cases ***
Example
    Create Directory    ${TEMPDIR}/stuff
    Copy File    ${CURDIR}/file.txt    ${TEMPDIR}/stuff
    No Operation

Default values

Arguments often have default values which can either be given or not. In the documentation the default value is typically separated from the argument name with an equal sign like name=default value. It is possible that all the arguments have default values, but there cannot be any positional arguments after arguments with default values.

Using default values is illustrated by the example below that uses Create File keyword which has arguments path, content=, encoding=UTF-8. Trying to use it without any arguments or more than three arguments would not work.

*** Test Cases ***
Example
    Create File    ${TEMPDIR}/empty.txt
    Create File    ${TEMPDIR}/utf-8.txt         Hyvä esimerkki
    Create File    ${TEMPDIR}/iso-8859-1.txt    Hyvä esimerkki    ISO-8859-1

Variable number of arguments

It is also possible that a keyword accepts any number of arguments. These so called varargs can be combined with mandatory arguments and arguments with default values, but they are always given after them. In the documentation they have an asterisk before the argument name like *varargs.

For example, Remove Files and Join Paths keywords from the OperatingSystem library have arguments *paths and base, *parts, respectively. The former can be used with any number of arguments, but the latter requires at least one argument.

*** Test Cases ***
Example
    Remove Files    ${TEMPDIR}/f1.txt    ${TEMPDIR}/f2.txt    ${TEMPDIR}/f3.txt
    @{paths} =    Join Paths    ${TEMPDIR}    f1.txt    f2.txt    f3.txt    f4.txt

Named arguments

The named argument syntax makes using arguments with default values more flexible, and allows explicitly labeling what a certain argument value means. Technically named arguments work exactly like keyword arguments in Python.

Basic syntax

It is possible to name an argument given to a keyword by prefixing the value with the name of the argument like arg=value. This is especially useful when multiple arguments have default values, as it is possible to name only some the arguments and let others use their defaults. For example, if a keyword accepts arguments arg1=a, arg2=b, arg3=c, and it is called with one argument arg3=override, arguments arg1 and arg2 get their default values, but arg3 gets value override. If this sounds complicated, the named arguments example below hopefully makes it more clear.

The named argument syntax is both case and space sensitive. The former means that if you have an argument arg, you must use it like arg=value, and neither Arg=value nor ARG=value works. The latter means that spaces are not allowed before the = sign, and possible spaces after it are considered part of the given value.

When the named argument syntax is used with user keywords, the argument names must be given without the ${} decoration. For example, user keyword with arguments ${arg1}=first, ${arg2}=second must be used like arg2=override.

Using normal positional arguments after named arguments like, for example, | Keyword | arg=value | positional |, does not work. The relative order of the named arguments does not matter.

Named arguments with variables

It is possible to use variables in both named argument names and values. If the value is a single scalar variable, it is passed to the keyword as-is. This allows using any objects, not only strings, as values also when using the named argument syntax. For example, calling a keyword like arg=${object} will pass the variable ${object} to the keyword without converting it to a string.

If variables are used in named argument names, variables are resolved before matching them against argument names.

The named argument syntax requires the equal sign to be written literally in the keyword call. This means that variable alone can never trigger the named argument syntax, not even if it has a value like foo=bar. This is important to remember especially when wrapping keywords into other keywords. If, for example, a keyword takes a variable number of arguments like @{args} and passes all of them to another keyword using the same @{args} syntax, possible named=arg syntax used in the calling side is not recognized. This is illustrated by the example below.

*** Test Cases ***
Example
    Run Program    shell=True    # This will not come as a named argument to Run Process

*** Keywords ***
Run Program
    [Arguments]    @{args}
    Run Process    program.py    @{args}    # Named arguments are not recognized from inside @{args}

If keyword needs to accept and pass forward any named arguments, it must be changed to accept free named arguments. See free named argument examples for a wrapper keyword version that can pass both positional and named arguments forward.

Escaping named arguments syntax

The named argument syntax is used only when the part of the argument before the equal sign matches one of the keyword's arguments. It is possible that there is a positional argument with a literal value like foo=quux, and also an unrelated argument with name foo. In this case the argument foo either incorrectly gets the value quux or, more likely, there is a syntax error.

In these rare cases where there are accidental matches, it is possible to use the backslash character to escape the syntax like foo\=quux. Now the argument will get a literal value foo=quux. Note that escaping is not needed if there are no arguments with name foo, but because it makes the situation more explicit, it may nevertheless be a good idea.

Where named arguments are supported

As already explained, the named argument syntax works with keywords. In addition to that, it also works when importing libraries.

Naming arguments is supported by user keywords and by most test libraries. The only exceptions are Python keywords explicitly using positional-only arguments.

Named arguments example

The following example demonstrates using the named arguments syntax with library keywords, user keywords, and when importing the Telnet test library.

*** Settings ***
Library    Telnet    prompt=$    default_log_level=DEBUG

*** Test Cases ***
Example
    Open connection    10.0.0.42    port=${PORT}    alias=example
    List files    options=-lh
    List files    path=/tmp    options=-l

*** Keywords ***
List files
    [Arguments]    ${path}=.    ${options}=
    Execute command    ls ${options} ${path}

Free named arguments

Robot Framework supports free named arguments, often also called free keyword arguments or kwargs, similarly as Python supports **kwargs. What this means is that a keyword can receive all arguments that use the named argument syntax (name=value) and do not match any arguments specified in the signature of the keyword.

Free named arguments are supported by same keyword types than normal named arguments. How keywords specify that they accept free named arguments depends on the keyword type. For example, Python based keywords simply use **kwargs and user keywords use &{kwargs}.

Free named arguments support variables similarly as named arguments. In practice that means that variables can be used both in names and values, but the escape sign must always be visible literally. For example, both foo=${bar} and ${foo}=${bar} are valid, as long as the variables that are used exist. An extra limitation is that free argument names must always be strings.

Examples

As the first example of using free named arguments, let's take a look at Run Process keyword in the Process library. It has a signature command, *arguments, **configuration, which means that it takes the command to execute (command), its arguments as variable number of arguments (*arguments) and finally optional configuration parameters as free named arguments (**configuration). The example below also shows that variables work with free keyword arguments exactly like when using the named argument syntax.

*** Test Cases ***
Free Named Arguments
    Run Process    program.py    arg1    arg2    cwd=/home/user
    Run Process    program.py    argument    shell=True    env=${ENVIRON}

See Free keyword arguments (**kwargs) section under Creating test libraries for more information about using the free named arguments syntax in your custom test libraries.

As the second example, let's create a wrapper user keyword for running the program.py in the above example. The wrapper keyword Run Program accepts all positional and named arguments and passes them forward to Run Process along with the name of the command to execute.

*** Test Cases ***
Free Named Arguments
    Run Program    arg1    arg2    cwd=/home/user
    Run Program    argument    shell=True    env=${ENVIRON}

*** Keywords ***
Run Program
    [Arguments]    @{args}    &{config}
    Run Process    program.py    @{args}    &{config}

Named-only arguments

Starting from Robot Framework 3.1, keywords can accept argument that must always be named using the named argument syntax. If, for example, a keyword would accept a single named-only argument example, it would always need to be used like example=value and using just value would not work. This syntax is inspired by the keyword-only arguments syntax supported by Python 3.

For most parts named-only arguments work the same way as named arguments. The main difference is that libraries implemented with Python 2 using the static library API do not support this syntax.

As an example of using the named-only arguments with user keywords, here is a variation of the Run Program in the above free named argument examples that only supports configuring shell:

*** Test Cases ***
Named-only Arguments
    Run Program    arg1    arg2              # 'shell' is False (default)
    Run Program    argument    shell=True    # 'shell' is True

*** Keywords ***
Run Program
    [Arguments]    @{args}    ${shell}=False
    Run Process    program.py    @{args}    shell=${shell}

Arguments embedded to keyword names

A totally different approach to specify arguments is embedding them into keyword names. This syntax is supported by both test library keywords and user keywords.

2.2.3   Failures

When test case fails

A test case fails if any of the keyword it uses fails. Normally this means that execution of that test case is stopped, possible test teardown is executed, and then execution continues from the next test case. It is also possible to use special continuable failures if stopping test execution is not desired.

Error messages

The error message assigned to a failed test case is got directly from the failed keyword. Often the error message is created by the keyword itself, but some keywords allow configuring them.

In some circumstances, for example when continuable failures are used, a test case can fail multiple times. In that case the final error message is got by combining the individual errors. Very long error messages are automatically cut from the middle to keep reports easier to read, but full error messages are always visible in log files as messages of the failed keywords.

By default error messages are normal text, but they can contain HTML formatting. This is enabled by starting the error message with marker string *HTML*. This marker will be removed from the final error message shown in reports and logs. Using HTML in a custom message is shown in the second example below.

*** Test Cases ***
Normal Error
    Fail    This is a rather boring example...

HTML Error
    ${number} =    Get Number
    Should Be Equal    ${number}    42    *HTML* Number is not my <b>MAGIC</b> number.

2.2.4   Test case name and documentation

The test case name comes directly from the Test Case section: it is exactly what is entered into the test case column. Test cases in one test suite should have unique names. Pertaining to this, you can also use the automatic variable ${TEST_NAME} within the test itself to refer to the test name. It is available whenever a test is being executed, including all user keywords, as well as the test setup and the test teardown.

Starting from Robot Framework 3.2, possible variables in the test case name are resolved so that the final name will contain the variable value. If the variable does not exist, its name is left unchanged.

*** Variables ***
${MAX AMOUNT}      ${5000000}

*** Test Cases ***
Amount cannot be larger than ${MAX AMOUNT}
    # ...

The [Documentation] setting allows setting free form documentation for a test case. That text is shown in the command line output and in the resulting logs and reports. If documentation gets long, it can be split into multiple rows. It is possible to use simple HTML formatting and variables can be used to make the documentation dynamic. Possible non-existing variables are left unchanged.

*** Test Cases ***
Simple
    [Documentation]    Simple and short documentation.
    No Operation

Multiple lines
    [Documentation]    First row of the documentation.
    ...
    ...                Documentation continues here. These rows form
    ...                a paragraph when shown in HTML outputs.
    No Operation

Formatting
    [Documentation]
    ...    This list has:
    ...    - *bold*
    ...    - _italics_
    ...    - link: http://robotframework.org
    No Operation

Variables
    [Documentation]    Executed at ${HOST} by ${USER}
    No Operation

It is important that test cases have clear and descriptive names, and in that case they normally do not need any documentation. If the logic of the test case needs documenting, it is often a sign that keywords in the test case need better names and they are to be enhanced, instead of adding extra documentation. Finally, metadata, such as the environment and user information in the last example above, is often better specified using tags.

2.2.5   Tagging test cases

Using tags in Robot Framework is a simple, yet powerful mechanism for classifying test cases and also user keywords. Tags are free text and Robot Framework itself has no special meaning for them except for the reserved tags discussed below. Tags can be used at least for the following purposes:

  • They are shown in test reports, logs and, of course, in the test data, so they provide metadata to test cases.
  • Statistics about test cases (total, passed, failed and skipped) are automatically collected based on them.
  • They can be used to include and exclude as well as to skip test cases.

There are multiple ways how to specify tags for test cases explained below:

Test Tags setting in the Settings section
All tests in a test case file with this setting always get specified tags. If this setting is used in a suite initialization file, all tests in child suites get these tags.
[Tags] setting with each test case
Tests get these tags in addition to tags specified using the Test Tags setting. The [Tags] setting also allows removing tags set with Test Tags by using the -tag syntax.
--settag command line option
All tests get tags set with this option in addition to tags they got elsewhere.
Set Tags, Remove Tags, Fail and Pass Execution keywords
These BuiltIn keywords can be used to manipulate tags dynamically during the test execution.

Example:

*** Settings ***
Test Tags       requirement: 42    smoke

*** Variables ***
${HOST}         10.0.1.42

*** Test Cases ***
No own tags
    [Documentation]    Test has tags 'requirement: 42' and 'smoke'.
    No Operation

Own tags
    [Documentation]    Test has tags 'requirement: 42', 'smoke' and 'not ready'.
    [Tags]    not ready
    No Operation

Own tags with variable
    [Documentation]    Test has tags 'requirement: 42', 'smoke' and 'host: 10.0.1.42'.
    [Tags]    host: ${HOST}
    No Operation

Remove common tag
    [Documentation]    Test has only tag 'requirement: 42'.
    [Tags]    -smoke
    No Operation

Remove common tag using a pattern
    [Documentation]    Test has only tag 'smoke'.
    [Tags]    -requirement: *
    No Operation

Set Tags and Remove Tags keywords
    [Documentation]    This test has tags 'smoke', 'example' and 'another'.
    Set Tags    example    another
    Remove Tags    requirement: *

As the example shows, tags can be created using variables, but otherwise they preserve the exact name used in the data. When tags are compared, for example, to collect statistics, to select test to be executed, or to remove duplicates, comparisons are case, space and underscore insensitive.

As demonstrated by the above examples, removing tags using -tag syntax supports simple patterns like -requirement: *. Tags starting with a hyphen have no special meaning otherwise than with the [Tags] setting. If there is a need to set a tag starting with a hyphen with [Tags], it is possible to use the escaped format like \-tag.

Note

The Test Tags setting is new in Robot Framework 6.0. Earlier versions support Force Tags and Default Tags settings discussed in the next section.

Note

The -tag syntax for removing common tags is new in Robot Framework 7.0.

Deprecation of Force Tags and Default Tags

Prior to Robot Framework 6.0, tags could be specified to tests in the Setting section using two different settings:

Force Tags
All tests unconditionally get these tags. This is exactly the same as Test Tags nowadays.
Default Tags
All tests get these tags by default. If a test has [Tags], it will not get these tags.

Both of these settings still work, but they are considered deprecated. A visible deprecation warning will be added in the future, most likely in Robot Framework 8.0, and eventually these settings will be removed. Tools like Tidy can be used to ease transition.

Updating Force Tags requires only renaming it to Test Tags. The Default Tags setting will be removed altogether, but the -tag functionality introduced in Robot Framework 7.0 provides same underlying functionality. The following examples demonstrate the needed changes.

Old syntax:

*** Settings ***
Force Tags      all
Default Tags    default

*** Test Cases ***
Common only
    [Documentation]    Test has tags 'all' and 'default'.
    No Operation

No default
    [Documentation]    Test has only tag 'all'.
    [Tags]
    No Operation

Own and no default
    [Documentation]    Test has tags 'all' and 'own'.
    [Tags]    own
    No Operation

New syntax:

*** Settings ***
Test Tags      all    default

*** Test Cases ***
Common only
    [Documentation]    Test has tags 'all' and 'default'.
    No Operation

No default
    [Documentation]    Test has only tag 'all'.
    [Tags]    -default
    No Operation

Own and no default
    [Documentation]    Test has tags 'all' and 'own'.
    [Tags]    own    -default
    No Operation

Reserved tags

Users are generally free to use whatever tags that work in their context. There are, however, certain tags that have a predefined meaning for Robot Framework itself, and using them for other purposes can have unexpected results. All special tags Robot Framework has and will have in the future have the robot: prefix. To avoid problems, users should thus not use any tag with this prefixes unless actually activating the special functionality. The current reserved tags are listed below, but more such tags are likely to be added in the future.

robot:continue-on-failure and robot:recursive-continue-on-failure
Used for enabling the continue-on-failure mode.
robot:stop-on-failure and robot:recursive-stop-on-failure
Used for disabling the continue-on-failure mode.
robot:skip-on-failure
Mark test to be skipped if it fails.
robot:skip
Mark test to be unconditionally skipped.
robot:exclude
Mark test to be unconditionally excluded.
robot:private
Mark keyword to be private.
robot:no-dry-run
Mark keyword not to be executed in the dry run mode.
robot:exit
Added to tests automatically when execution is stopped gracefully.
robot:flatten
Enable flattening keyword during execution time.

As of RobotFramework 4.1, reserved tags are suppressed by default in tag statistics. They will be shown when they are explicitly included via the --tagstatinclude robot:* command line option.

2.2.6   Test setup and teardown

Robot Framework has similar test setup and teardown functionality as many other test automation frameworks. In short, a test setup is something that is executed before a test case, and a test teardown is executed after a test case. In Robot Framework setups and teardowns are just normal keywords with possible arguments.

A setup and a teardown are always a single keyword. If they need to take care of multiple separate tasks, it is possible to create higher-level user keywords for that purpose. An alternative solution is executing multiple keywords using the BuiltIn keyword Run Keywords.

The test teardown is special in two ways. First of all, it is executed also when a test case fails, so it can be used for clean-up activities that must be done regardless of the test case status. In addition, all the keywords in the teardown are also executed even if one of them fails. This continue on failure functionality can be used also with normal keywords, but inside teardowns it is on by default.

The easiest way to specify a setup or a teardown for test cases in a test case file is using the Test Setup and Test Teardown settings in the Setting section. Individual test cases can also have their own setup or teardown. They are defined with the [Setup] or [Teardown] settings in the test case section and they override possible Test Setup and Test Teardown settings. Having no keyword after a [Setup] or [Teardown] setting means having no setup or teardown. It is also possible to use value NONE to indicate that a test has no setup/teardown.

*** Settings ***
Test Setup       Open Application    App A
Test Teardown    Close Application

*** Test Cases ***
Default values
    [Documentation]    Setup and teardown from setting section
    Do Something

Overridden setup
    [Documentation]    Own setup, teardown from setting section
    [Setup]    Open Application    App B
    Do Something

No teardown
    [Documentation]    Default setup, no teardown at all
    Do Something
    [Teardown]

No teardown 2
    [Documentation]    Setup and teardown can be disabled also with special value NONE
    Do Something
    [Teardown]    NONE

Using variables
    [Documentation]    Setup and teardown specified using variables
    [Setup]    ${SETUP}
    Do Something
    [Teardown]    ${TEARDOWN}

The name of the keyword to be executed as a setup or a teardown can be a variable. This facilitates having different setups or teardowns in different environments by giving the keyword name as a variable from the command line.

Note

Test suites can have a setup and teardown of their own. A suite setup is executed before any test cases or sub test suites in that test suite, and similarly a suite teardown is executed after them.

2.2.7   Test templates

Test templates convert normal keyword-driven test cases into data-driven tests. Whereas the body of a keyword-driven test case is constructed from keywords and their possible arguments, test cases with template contain only the arguments for the template keyword. Instead of repeating the same keyword multiple times per test and/or with all tests in a file, it is possible to use it only per test or just once per file.

Template keywords can accept both normal positional and named arguments, as well as arguments embedded to the keyword name. Unlike with other settings, it is not possible to define a template using a variable.

Basic usage

How a keyword accepting normal positional arguments can be used as a template is illustrated by the following example test cases. These two tests are functionally fully identical.

*** Test Cases ***
Normal test case
    Example keyword    first argument    second argument

Templated test case
    [Template]    Example keyword
    first argument    second argument

As the example illustrates, it is possible to specify the template for an individual test case using the [Template] setting. An alternative approach is using the Test Template setting in the Setting section, in which case the template is applied for all test cases in that test case file. The [Template] setting overrides the possible template set in the Setting section, and an empty value for [Template] means that the test has no template even when Test Template is used. It is also possible to use value NONE to indicate that a test has no template.

If a templated test case has multiple data rows in its body, the template is applied for all the rows one by one. This means that the same keyword is executed multiple times, once with data on each row. Templated tests are also special so that all the rounds are executed even if one or more of them fails. It is possible to use this kind of continue on failure mode with normal tests too, but with the templated tests the mode is on automatically.

*** Settings ***
Test Template    Example keyword

*** Test Cases ***
Templated test case
    first round 1     first round 2
    second round 1    second round 2
    third round 1     third round 2

Using keywords with default values or accepting variable number of arguments, as well as using named arguments and free named arguments, work with templates exactly like they work otherwise. Using variables in arguments is also supported normally.

Templates with embedded arguments

Templates support a variation of the embedded argument syntax. With templates this syntax works so that if the template keyword has variables in its name, they are considered placeholders for arguments and replaced with the actual arguments used with the template. The resulting keyword is then used without positional arguments. This is best illustrated with an example:

*** Test Cases ***
Normal test case with embedded arguments
    The result of 1 + 1 should be 2
    The result of 1 + 2 should be 3

Template with embedded arguments
    [Template]    The result of ${calculation} should be ${expected}
    1 + 1    2
    1 + 2    3

*** Keywords ***
The result of ${calculation} should be ${expected}
    ${result} =    Calculate    ${calculation}
    Should Be Equal    ${result}     ${expected}

When embedded arguments are used with templates, the number of arguments in the template keyword name must match the number of arguments it is used with. The argument names do not need to match the arguments of the original keyword, though, and it is also possible to use different arguments altogether:

*** Test Cases ***
Different argument names
    [Template]    The result of ${foo} should be ${bar}
    1 + 1    2
    1 + 2    3

Only some arguments
    [Template]    The result of ${calculation} should be 3
    1 + 2
    4 - 1

New arguments
    [Template]    The ${meaning} of ${life} should be 42
    result    21 * 2

The main benefit of using embedded arguments with templates is that argument names are specified explicitly. When using normal arguments, the same effect can be achieved by naming the columns that contain arguments. This is illustrated by the data-driven style example in the next section.

Templates with FOR loops

If templates are used with FOR loops, the template is applied for all the steps inside the loop. The continue on failure mode is in use also in this case, which means that all the steps are executed with all the looped elements even if there are failures.

*** Test Cases ***
Template with FOR loop
    [Template]    Example keyword
    FOR    ${item}    IN    @{ITEMS}
        ${item}    2nd arg
    END
    FOR    ${index}    IN RANGE    42
        1st arg    ${index}
    END

Templates with IF/ELSE structures

IF/ELSE structures can be also used together with templates. This can be useful, for example, when used together with FOR loops to filter executed arguments.

*** Test Cases ***
Template with FOR and IF
    [Template]    Example keyword
    FOR    ${item}    IN    @{ITEMS}
        IF  ${item} < 5
            ${item}    2nd arg
        END
    END

2.2.8   Different test case styles

There are several different ways in which test cases may be written. Test cases that describe some kind of workflow may be written either in keyword-driven or behavior-driven style. Data-driven style can be used to test the same workflow with varying input data.

Keyword-driven style

Workflow tests, such as the Valid Login test described earlier, are constructed from several keywords and their possible arguments. Their normal structure is that first the system is taken into the initial state (Open Login Page in the Valid Login example), then something is done to the system (Input Name, Input Password, Submit Credentials), and finally it is verified that the system behaved as expected (Welcome Page Should Be Open).

Data-driven style

Another style to write test cases is the data-driven approach where test cases use only one higher-level keyword, often created as a user keyword, that hides the actual test workflow. These tests are very useful when there is a need to test the same scenario with different input and/or output data. It would be possible to repeat the same keyword with every test, but the test template functionality allows specifying the keyword to use only once.

*** Settings ***
Test Template    Login with invalid credentials should fail

*** Test Cases ***                USERNAME         PASSWORD
Invalid User Name                 invalid          ${VALID PASSWORD}
Invalid Password                  ${VALID USER}    invalid
Invalid User Name and Password    invalid          invalid
Empty User Name                   ${EMPTY}         ${VALID PASSWORD}
Empty Password                    ${VALID USER}    ${EMPTY}
Empty User Name and Password      ${EMPTY}         ${EMPTY}

Tip

Naming columns like in the example above makes tests easier to understand. This is possible because on the header row other cells except the first one are ignored.

The above example has six separate tests, one for each invalid user/password combination, and the example below illustrates how to have only one test with all the combinations. When using test templates, all the rounds in a test are executed even if there are failures, so there is no real functional difference between these two styles. In the above example separate combinations are named so it is easier to see what they test, but having potentially large number of these tests may mess-up statistics. Which style to use depends on the context and personal preferences.

*** Test Cases ***
Invalid Password
    [Template]    Login with invalid credentials should fail
    invalid          ${VALID PASSWORD}
    ${VALID USER}    invalid
    invalid          whatever
    ${EMPTY}         ${VALID PASSWORD}
    ${VALID USER}    ${EMPTY}
    ${EMPTY}         ${EMPTY}

Behavior-driven style

It is also possible to write test cases as requirements that also non-technical project stakeholders must understand. These executable requirements are a corner stone of a process commonly called Acceptance Test Driven Development (ATDD) or Specification by Example.

One way to write these requirements/tests is Given-When-Then style popularized by Behavior Driven Development (BDD). When writing test cases in this style, the initial state is usually expressed with a keyword starting with word Given, the actions are described with keyword starting with When and the expectations with a keyword starting with Then. Keyword starting with And or But may be used if a step has more than one action.

*** Test Cases ***
Valid Login
    Given login page is open
    When valid username and password are inserted
    and credentials are submitted
    Then welcome page should be open
Ignoring Given/When/Then/And/But prefixes

Prefixes Given, When, Then, And and But can be omitted when creating keywords. For example, Given login page is open in the above example is typically implemented without the word Given so that the name is just Login page is open. Omitting prefixes allows using the same keyword with different prefixes. For example, Welcome page should be open could be used as Then welcome page should be open or and welcome page should be open.

Note

These prefixes can be localized. See the Translations appendix for supported translations.

Embedding data to keywords

When writing concrete examples it is useful to be able to pass actual data to keyword implementations. This can be done by embedding arguments into keyword name.

2.3   Creating tasks

In addition to test automation, Robot Framework can be used for other automation purposes, including robotic process automation (RPA). It has always been possible, but Robot Framework 3.1 added official support for automating tasks, not only tests. For most parts creating tasks works the same way as creating tests and the only real difference is in terminology. Tasks can also be organized into suites exactly like test cases.

2.3.1   Task syntax

Tasks are created based on the available keywords exactly like test cases, and the task syntax is in general identical to the test case syntax. The main difference is that tasks are created in Task sections instead of Test Case sections:

*** Tasks ***
Process invoice
    Read information from PDF
    Validate information
    Submit information to backend system
    Validate information is visible in web UI

It is an error to have both tests and tasks in same file.

2.4   Creating test suites

Robot Framework test cases are created in test case files, which can be organized into directories. These files and directories create a hierarchical test suite structure. Same concepts apply also when creating tasks, but the terminology differs.

2.4.1   Suite files

Robot Framework test cases are created using test case sections in suite files, also known as test case files. Such a file automatically creates a test suite from all the test cases it contains. There is no upper limit for how many test cases there can be, but it is recommended to have less than ten, unless the data-driven approach is used, where one test case consists of only one high-level keyword.

The following settings in the Setting section can be used to customize the suite:

Name
Used for setting a custom suite name. The default name is created based on the file or directory name.
Documentation
Used for specifying a suite documentation.
Metadata
Used for setting free suite metadata as name-value pairs.
Suite Setup, Suite Teardown
Specify suite setup and teardown.

Note

Setting names are case-insensitive, but the format used above is recommended.

2.4.2   Suite directories

Test case files can be organized into directories, and these directories create higher-level test suites. A test suite created from a directory cannot have any test cases directly, but it contains other test suites with test cases, instead. These directories can then be placed into other directories creating an even higher-level suite. There are no limits for the structure, so test cases can be organized as needed.

When a test directory is executed, the files and directories it contains are processed recursively as follows:

  • Files and directories with names starting with a dot (.) or an underscore (_) are ignored.
  • Directories with the name CVS are ignored (case-sensitive).
  • Files in supported file formats are processed.
  • Other files are ignored.

If a file or directory that is processed does not contain any test cases, it is silently ignored (a message is written to the syslog) and the processing continues.

Suite initialization files

A test suite created from a directory can have similar settings as a suite created from a test case file. Because a directory alone cannot have that kind of information, it must be placed into a special test suite initialization file. An initialization file name must always be of the format __init__.ext, where the extension must be one of the supported file formats (typically __init__.robot). The name format is borrowed from Python, where files named in this manner denote that a directory is a module.

Starting from Robot Framework 6.1, it is also possible to define a suite initialization file for automatically created suite when starting the test execution by giving multiple paths.

Initialization files have the same structure and syntax as test case files, except that they cannot have test case sections and not all settings are supported. Variables and keywords created or imported in initialization files are not available in the lower level test suites. If you need to share variables or keywords, you can put them into resource files that can be imported both by initialization and test case files.

The main usage for initialization files is specifying test suite related settings similarly as in suite files, but setting some test case related settings is also possible. How to use different settings in the initialization files is explained below.

Name, Documentation, Metadata, Suite Setup, Suite Teardown
These suite specific settings work the same way in suite initialization files as in suite files.
Test Tags
Specified tags are unconditionally set to all tests in all suite files this directory contains, recursively. New in Robot Framework 6.1. The deprecated Force Tags needs to be used with older versions.
Test Setup, Test Teardown, Test Timeout
Set the default value for test setup/teardown or test timeout to all test cases this directory contains. Can be overridden on lower level. Notice that keywords used as setups and teardowns must be available in test case files where tests using them are. Defining keywords in the initialization file itself is not enough.
Task Setup, Task Teardown, Task Tags, Task Timeout
Aliases for Test Setup, Test Teardown, Test Tags and Test Timeout, respectively, that can be used when creating tasks, not tests.
Default Tags, Test Template
Not supported in initialization files.
*** Settings ***
Documentation    Example suite
Suite Setup      Do Something    ${MESSAGE}
Test Tags        example
Library          SomeLibrary

*** Variables ***
${MESSAGE}       Hello, world!

*** Keywords ***
Do Something
    [Arguments]    ${args}
    Some Keyword    ${arg}
    Another Keyword

2.4.3   Suite name

The test suite name is constructed from the file or directory name by default. The name is created so that the extension is ignored, possible underscores are replaced with spaces, and names fully in lower case are title cased. For example, some_tests.robot becomes Some Tests and My_test_directory becomes My test directory.

The file or directory name can contain a prefix to control the execution order of the suites. The prefix is separated from the base name by two underscores and, when constructing the actual test suite name, both the prefix and underscores are removed. For example files 01__some_tests.robot and 02__more_tests.robot create test suites Some Tests and More Tests, respectively, and the former is executed before the latter.

Starting from Robot Framework 6.1, it is also possible to give a custom name to a suite by using the Name setting in the Setting section:

*** Settings ***
Name            Custom suite name

The name of the top-level suite can be overridden from the command line with the --name option.

2.4.4   Suite documentation

The documentation for a test suite is set using the Documentation setting in the Settings section. It can be used both in suite files and in suite initialization files. Suite documentation has exactly the same characteristics regarding to where it is shown and how it can be created as test case documentation. For details about the syntax see the Documentation formatting appendix.

*** Settings ***
Documentation    An example suite documentation with *some* _formatting_.
...              Long documentation can be split into multiple lines.

The documentation of the top-level suite can be overridden from the command line with the --doc option.

2.4.5   Free suite metadata

In addition to documentation, suites can also have free metadata. This metadata is defined as name-value pairs in the Settings section using the Metadata setting. It is shown in reports and logs similarly as documentation.

Name of the metadata is the first argument given to the Metadata setting and the remaining arguments specify its value. The value is handled similarly as documentation, which means that it supports HTML formatting and variables, and that longer values can be split into multiple rows.

*** Settings ***
Metadata        Version            2.0
Metadata        Robot Framework    http://robotframework.org
Metadata        Platform           ${PLATFORM}
Metadata        Longer Value
...             Longer metadata values can be split into multiple
...             rows. Also *simple* _formatting_ is supported.

The free metadata of the top-level suite can be set from the command line with the --metadata option.

2.4.6   Suite setup and teardown

Not only test cases but also test suites can have a setup and a teardown. A suite setup is executed before running any of the suite's test cases or child test suites, and a suite teardown is executed after them. All test suites can have a setup and a teardown; with suites created from a directory they must be specified in a suite initialization file.

Similarly as with test cases, a suite setup and teardown are keywords that may take arguments. They are defined in the Setting section with Suite Setup and Suite Teardown settings, respectively. Keyword names and possible arguments are located in the columns after the setting name.

If a suite setup fails, all test cases in it and its child test suites are immediately assigned a fail status and they are not actually executed. This makes suite setups ideal for checking preconditions that must be met before running test cases is possible.

A suite teardown is normally used for cleaning up after all the test cases have been executed. It is executed even if the setup of the same suite fails. If the suite teardown fails, all test cases in the suite are marked failed, regardless of their original execution status. Note that all the keywords in suite teardowns are executed even if one of them fails.

The name of the keyword to be executed as a setup or a teardown can be a variable. This facilitates having different setups or teardowns in different environments by giving the keyword name as a variable from the command line.

2.5   Using test libraries

Test libraries contain those lowest-level keywords, often called library keywords, which actually interact with the system under test. All test cases always use keywords from some library, often through higher-level user keywords. This section explains how to take test libraries into use and how to use the keywords they provide. Creating test libraries is described in a separate section.

2.5.1   Importing libraries

Test libraries are typically imported using the Library setting, but it is also possible to use the Import Library keyword.

Using Library setting

Test libraries are normally imported using the Library setting in the Setting section and having the library name in the subsequent column. Unlike most of the other data, the library name is both case- and space-sensitive. If a library is in a package, the full name including the package name must be used.

In those cases where the library needs arguments, they are listed in the columns after the library name. It is possible to use default values, variable number of arguments, and named arguments in test library imports similarly as with arguments to keywords. Both the library name and arguments can be set using variables.

*** Settings ***
Library    OperatingSystem
Library    my.package.TestLibrary
Library    MyLibrary    arg1    arg2
Library    ${LIBRARY}

It is possible to import test libraries in suite files, resource files and suite initialization files. In all these cases, all the keywords in the imported library are available in that file. With resource files, those keywords are also available in other files using them.

Using Import Library keyword

Another possibility to take a test library into use is using the keyword Import Library from the BuiltIn library. This keyword takes the library name and possible arguments similarly as the Library setting. Keywords from the imported library are available in the test suite where the Import Library keyword was used. This approach is useful in cases where the library is not available when the test execution starts and only some other keywords make it available.

*** Test Cases ***
Example
    Do Something
    Import Library    MyLibrary    arg1    arg2
    KW From MyLibrary

2.5.2   Specifying library to import

Libraries to import can be specified either by using the library name or the path to the library. These approaches work the same way regardless if the library is imported using the Library setting or the Import Library keyword.

Using library name

The most common way to specify a test library to import is using its name, like it has been done in all the examples in this section. In these cases Robot Framework tries to find the class or module implementing the library from the module search path. Libraries that are installed somehow ought to be in the module search path automatically, but with other libraries the search path may need to be configured separately.

The biggest benefit of this approach is that when the module search path has been configured, often using a custom start-up script, normal users do not need to think where libraries actually are installed. The drawback is that getting your own, possible very simple, libraries into the search path may require some additional configuration.

Using physical path to library

Another mechanism for specifying the library to import is using a path to it in the file system. This path is considered relative to the directory where current test data file is situated similarly as paths to resource and variable files. The main benefit of this approach is that there is no need to configure the module search path.

If the library is a file, the path to it must contain extension, i.e. .py. If a library is implemented as a directory, the path to it must have a trailing forward slash (/) if the path is relative. With absolute paths the trailing slash is optional. Following examples demonstrate these different usages.

*** Settings ***
Library    PythonLibrary.py
Library    relative/path/PythonDirLib/    possible    arguments
Library    ${RESOURCES}/Example.class

A limitation of this approach is that libraries implemented as Python classes must be in a module with the same name as the class.

2.5.3   Setting custom name to library

The library name is shown in test logs before keyword names, and if multiple keywords have the same name, they must be used so that the keyword name is prefixed with the library name. The library name is got normally from the module or class name implementing it, but there are some situations where changing it is desirable:

  • There is a need to import the same library several times with different arguments. This is not possible otherwise.
  • The library name is inconveniently long.
  • You want to use variables to import different libraries in different environments, but refer to them with the same name.
  • The library name is misleading or otherwise poor. In this case, changing the actual name is, of course, a better solution.

The basic syntax for specifying the new name is having the text AS (case-sensitive) after the library name and then having the new name after that. The specified name is shown in logs and must be used in the test data when using keywords' full name (LibraryName.Keyword Name).

*** Settings ***
Library    packagename.TestLib    AS    TestLib
Library    ${LIBRARY}    AS    MyName

Possible arguments to the library are placed between the original library name and the AS marker. The following example illustrates how the same library can be imported several times with different arguments:

*** Settings ***
Library    SomeLibrary    localhost        1234    AS    LocalLib
Library    SomeLibrary    server.domain    8080    AS    RemoteLib

*** Test Cases ***
Example
    LocalLib.Some Keyword     some arg       second arg
    RemoteLib.Some Keyword    another arg    whatever
    LocalLib.Another Keyword

Setting a custom name to a test library works both when importing a library in the Setting section and when using the Import Library keyword.

Note

Prior to Robot Framework 6.0 the marker to use when giving a custom name to a library was WITH NAME instead of AS. The old syntax continues to work, but it is considered deprecated and will eventually be removed.

2.5.4   Standard libraries

Some test libraries are distributed with Robot Framework and these libraries are called standard libraries. The BuiltIn library is special, because it is taken into use automatically and thus its keywords are always available. Other standard libraries need to be imported in the same way as any other libraries, but there is no need to install them.

Normal standard libraries

The available normal standard libraries are listed below with links to their documentations:

Remote library

In addition to the normal standard libraries listed above, there is also Remote library that is totally different than the other standard libraries. It does not have any keywords of its own but it works as a proxy between Robot Framework and actual test library implementations. These libraries can be running on other machines than the core framework and can even be implemented using languages not supported by Robot Framework natively.

See separate Remote library interface section for more information about this concept.

2.5.5   External libraries

Any test library that is not one of the standard libraries is, by definition, an external library. The Robot Framework open source community has implemented several generic libraries, such as SeleniumLibrary and SwingLibrary, which are not packaged with the core framework. A list of publicly available libraries can be found from http://robotframework.org.

Generic and custom libraries can obviously also be implemented by teams using Robot Framework. See Creating test libraries section for more information about that topic.

Different external libraries can have a totally different mechanism for installing them and taking them into use. Sometimes they may also require some other dependencies to be installed separately. All libraries should have clear installation and usage documentation and they should preferably automate the installation process.

2.6   Variables

2.6.1   Introduction

Variables are an integral feature of Robot Framework, and they can be used in most places in test data. Most commonly, they are used in arguments for keywords in Test Case and Keyword sections, but also all settings allow variables in their values. A normal keyword name cannot be specified with a variable, but the BuiltIn keyword Run Keyword can be used to get the same effect.

Robot Framework has its own variables that can be used as scalars, lists or dictionaries using syntax ${SCALAR}, @{LIST} and &{DICT}, respectively. In addition to this, environment variables can be used directly with syntax %{ENV_VAR}.

Variables are useful, for example, in these cases:

  • When strings change often in the test data. With variables you only need to make these changes in one place.
  • When creating system-independent and operating-system-independent test data. Using variables instead of hard-coded strings eases that considerably (for example, ${RESOURCES} instead of c:\resources, or ${HOST} instead of 10.0.0.1:8080). Because variables can be set from the command line when tests are started, changing system-specific variables is easy (for example, --variable HOST:10.0.0.2:1234 --variable RESOURCES:/opt/resources). This also facilitates localization testing, which often involves running the same tests with different strings.
  • When there is a need to have objects other than strings as arguments for keywords. This is not possible without variables.
  • When different keywords, even in different test libraries, need to communicate. You can assign a return value from one keyword to a variable and pass it as an argument to another.
  • When values in the test data are long or otherwise complicated. For example, ${URL} is shorter than http://long.domain.name:8080/path/to/service?foo=1&bar=2&zap=42.

If a non-existent variable is used in the test data, the keyword using it fails. If the same syntax that is used for variables is needed as a literal string, it must be escaped with a backslash as in \${NAME}.

2.6.2   Using variables

This section explains how to use variables, including the normal scalar variable syntax ${var}, how to use variables in list and dictionary contexts like @{var} and &{var}, respectively, and how to use environment variables like %{var}. Different ways how to create variables are discussed in the subsequent sections.

Robot Framework variables, similarly as keywords, are case-insensitive, and also spaces and underscores are ignored. However, it is recommended to use capital letters with global variables (for example, ${PATH} or ${TWO WORDS}) and small letters with local variables that are only available in certain test cases or user keywords (for example, ${my var}). Much more importantly, though, case should be used consistently.

Variable name consists of the variable type identifier ($, @, &, %), curly braces ({, }) and the actual variable name between the braces. Unlike in some programming languages where similar variable syntax is used, curly braces are always mandatory. Variable names can basically have any characters between the curly braces. However, using only alphabetic characters from a to z, numbers, underscore and space is recommended, and it is even a requirement for using the extended variable syntax.

Scalar variable syntax

The most common way to use variables in Robot Framework test data is using the scalar variable syntax like ${var}. When this syntax is used, the variable name is replaced with its value as-is. Most of the time variable values are strings, but variables can contain any object, including numbers, lists, dictionaries, or even custom objects.

The example below illustrates the usage of scalar variables. Assuming that the variables ${GREET} and ${NAME} are available and assigned to strings Hello and world, respectively, both the example test cases are equivalent.

*** Test Cases ***
Constants
    Log    Hello
    Log    Hello, world!!

Variables
    Log    ${GREET}
    Log    ${GREET}, ${NAME}!!

When a scalar variable is used alone without any text or other variables around it, like in ${GREET} above, the variable is replaced with its value as-is and the value can be any object. If the variable is not used alone, like ${GREER}, ${NAME}!! above, its value is first converted into a string and then concatenated with the other data.

Note

Variable values are used as-is without conversions also when passing arguments to keywords using the named arguments syntax like argname=${var}.

The example below demonstrates the difference between having a variable in alone or with other content. First, let us assume that we have a variable ${STR} set to a string Hello, world! and ${OBJ} set to an instance of the following Python object:

class MyObj:

    def __str__():
        return "Hi, terra!"

With these two variables set, we then have the following test data:

*** Test Cases ***
Objects
    KW 1    ${STR}
    KW 2    ${OBJ}
    KW 3    I said "${STR}"
    KW 4    You said "${OBJ}"

Finally, when this test data is executed, different keywords receive the arguments as explained below:

  • KW 1 gets a string Hello, world!
  • KW 2 gets an object stored to variable ${OBJ}
  • KW 3 gets a string I said "Hello, world!"
  • KW 4 gets a string You said "Hi, terra!"

Note

Converting variables to Unicode obviously fails if the variable cannot be represented as Unicode. This can happen, for example, if you try to use byte sequences as arguments to keywords so that you catenate the values together like ${byte1}${byte2}. A workaround is creating a variable that contains the whole value and using it alone in the cell (e.g. ${bytes}) because then the value is used as-is.

List variable syntax

When a variable is used as a scalar like ${EXAMPLE}, its value is be used as-is. If a variable value is a list or list-like, it is also possible to use it as a list variable like @{EXAMPLE}. In this case the list is expanded and individual items are passed in as separate arguments. This is easiest to explain with an example. Assuming that a variable @{USER} has value ['robot', 'secret'], the following two test cases are equivalent:

*** Test Cases ***
Constants
    Login    robot    secret

List Variable
    Login    @{USER}

Robot Framework stores its own variables in one internal storage and allows using them as scalars, lists or dictionaries. Using a variable as a list requires its value to be a Python list or list-like object. Robot Framework does not allow strings to be used as lists, but other iterable objects such as tuples or dictionaries are accepted.

Starting from Robot Framework 4.0, list expansion can be used in combination with list item access making these usages possible:

*** Test Cases ***
Nested container
    ${nested} =    Evaluate    [['a', 'b', 'c'], {'key': ['x', 'y']}]
    Log Many    @{nested}[0]         # Logs 'a', 'b' and 'c'.
    Log Many    @{nested}[1][key]    # Logs 'x' and 'y'.

Slice
    ${items} =    Create List    first    second    third
    Log Many    @{items}[1:]         # Logs 'second' and  'third'.
Using list variables with other data

It is possible to use list variables with other arguments, including other list variables.

*** Test Cases ***
Example
    Keyword    @{LIST}    more    args
    Keyword    ${SCALAR}    @{LIST}    constant
    Keyword    @{LIST}    @{ANOTHER}    @{ONE MORE}
Using list variables with settings

List variables can be used only with some of the settings. They can be used in arguments to imported libraries and variable files, but library and variable file names themselves cannot be list variables. Also with setups and teardowns list variable can not be used as the name of the keyword, but can be used in arguments. With tag related settings they can be used freely. Using scalar variables is possible in those places where list variables are not supported.

*** Settings ***
Library         ExampleLibrary      @{LIB ARGS}    # This works
Library         ${LIBRARY}          @{LIB ARGS}    # This works
Library         @{LIBRARY AND ARGS}                # This does not work
Suite Setup     Some Keyword        @{KW ARGS}     # This works
Suite Setup     ${KEYWORD}          @{KW ARGS}     # This works
Suite Setup     @{KEYWORD AND ARGS}                # This does not work
Default Tags    @{TAGS}                            # This works

Dictionary variable syntax

As discussed above, a variable containing a list can be used as a list variable to pass list items to a keyword as individual arguments. Similarly a variable containing a Python dictionary or a dictionary-like object can be used as a dictionary variable like &{EXAMPLE}. In practice this means that the dictionary is expanded and individual items are passed as named arguments to the keyword. Assuming that a variable &{USER} has value {'name': 'robot', 'password': 'secret'}, the following two test cases are equivalent.

*** Test Cases ***
Constants
    Login    name=robot    password=secret

Dict Variable
    Login    &{USER}

Starting from Robot Framework 4.0, dictionary expansion can be used in combination with dictionary item access making usages like &{nested}[key] possible.

Using dictionary variables with other data

It is possible to use dictionary variables with other arguments, including other dictionary variables. Because named argument syntax requires positional arguments to be before named argument, dictionaries can only be followed by named arguments or other dictionaries.

*** Test Cases ***
Example
    Keyword    &{DICT}    named=arg
    Keyword    positional    @{LIST}    &{DICT}
    Keyword    &{DICT}    &{ANOTHER}    &{ONE MORE}
Using dictionary variables with settings

Dictionary variables cannot generally be used with settings. The only exception are imports, setups and teardowns where dictionaries can be used as arguments.

*** Settings ***
Library        ExampleLibrary    &{LIB ARGS}
Suite Setup    Some Keyword      &{KW ARGS}     named=arg

Accessing list and dictionary items

It is possible to access items of subscriptable variables, e.g. lists and dictionaries, using special syntax like ${var}[item] or ${var}[nested][item]. Starting from Robot Framework 4.0, it is also possible to use item access together with list expansion and dictionary expansion by using syntax @{var}[item] and &{var}[item], respectively.

Note

Prior to Robot Framework 3.1 the normal item access syntax was @{var}[item] with lists and &{var}[item] with dictionaries. Robot Framework 3.1 introduced the generic ${var}[item] syntax along with some other nice enhancements and the old item access syntax was deprecated in Robot Framework 3.2.

Accessing sequence items

It is possible to access a certain item of a variable containing a sequence (e.g. list, string or bytes) with the syntax ${var}[index], where index is the index of the selected value. Indices start from zero, negative indices can be used to access items from the end, and trying to access an item with too large an index causes an error. Indices are automatically converted to integers, and it is also possible to use variables as indices.

*** Test Cases ***
Positive index
    Login    ${USER}[0]    ${USER}[1]
    Title Should Be    Welcome ${USER}[0]!

Negative index
    Keyword    ${SEQUENCE}[-1]

Index defined as variable
    Keyword    ${SEQUENCE}[${INDEX}]

Sequence item access supports also the same "slice" functionality as Python with syntax like ${var}[1:]. With this syntax you do not get a single item but a slice of the original sequence. Same way as with Python you can specify the start index, the end index, and the step:

*** Test Cases ***
Start index
    Keyword    ${SEQUENCE}[1:]

End index
    Keyword    ${SEQUENCE}[:4]

Start and end
    Keyword    ${SEQUENCE}[2:-1]

Step
    Keyword    ${SEQUENCE}[::2]
    Keyword    ${SEQUENCE}[1:-1:10]

Note

The slice syntax is new in Robot Framework 3.1. It was extended to work with list expansion like @{var}[1:] in Robot Framework 4.0.

Note

Prior to Robot Framework 3.2, item and slice access was only supported with variables containing lists, tuples, or other objects considered list-like. Nowadays all sequences, including strings and bytes, are supported.

Accessing individual dictionary items

It is possible to access a certain value of a dictionary variable with the syntax ${NAME}[key], where key is the name of the selected value. Keys are considered to be strings, but non-strings keys can be used as variables. Dictionary values accessed in this manner can be used similarly as scalar variables.

If a key is a string, it is possible to access its value also using attribute access syntax ${NAME.key}. See Creating dictionary variables for more details about this syntax.

*** Test Cases ***
Dictionary variable item
    Login    ${USER}[name]    ${USER}[password]
    Title Should Be    Welcome ${USER}[name]!

Key defined as variable
    Log Many    ${DICT}[${KEY}]    ${DICT}[${42}]

Attribute access
    Login    ${USER.name}    ${USER.password}
    Title Should Be    Welcome ${USER.name}!
Nested item access

Also nested subscriptable variables can be accessed using the same item access syntax like ${var}[item1][item2]. This is especially useful when working with JSON data often returned by REST services. For example, if a variable ${DATA} contains [{'id': 1, 'name': 'Robot'}, {'id': 2, 'name': 'Mr. X'}], this tests would pass:

*** Test Cases ***
Nested item access
    Should Be Equal    ${DATA}[0][name]    Robot
    Should Be Equal    ${DATA}[1][id]      ${2}

Environment variables

Robot Framework allows using environment variables in the test data using the syntax %{ENV_VAR_NAME}. They are limited to string values. It is possible to specify a default value, that is used if the environment variable does not exists, by separating the variable name and the default value with an equal sign like %{ENV_VAR_NAME=default value}.

Environment variables set in the operating system before the test execution are available during it, and it is possible to create new ones with the keyword Set Environment Variable or delete existing ones with the keyword Delete Environment Variable, both available in the OperatingSystem library. Because environment variables are global, environment variables set in one test case can be used in other test cases executed after it. However, changes to environment variables are not effective after the test execution.

*** Test Cases ***
Environment variables
    Log    Current user: %{USER}
    Run    %{JAVA_HOME}${/}javac

Environment variables with defaults
    Set port    %{APPLICATION_PORT=8080}

Note

Support for specifying the default value is new in Robot Framework 3.2.

2.6.3   Creating variables

Variables can spring into existence from different sources.

Variable section

The most common source for variables are Variable sections in suite files and resource files. Variable sections are convenient, because they allow creating variables in the same place as the rest of the test data, and the needed syntax is very simple. Their main disadvantages are that values are always strings and they cannot be created dynamically. If either of these is a problem, variable files can be used instead.

Creating scalar variables

The simplest possible variable assignment is setting a string into a scalar variable. This is done by giving the variable name (including ${}) in the first column of the Variable section and the value in the second one. If the second column is empty, an empty string is set as a value. Also an already defined variable can be used in the value.

*** Variables ***
${NAME}         Robot Framework
${VERSION}      2.0
${ROBOT}        ${NAME} ${VERSION}

It is also possible, but not obligatory, to use the equals sign = after the variable name to make assigning variables slightly more explicit.

*** Variables ***
${NAME} =       Robot Framework
${VERSION} =    2.0

If a scalar variable has a long value, it can be split into multiple rows by using the ... syntax. By default rows are concatenated together using a space, but this can be changed by using a having separator configuration option after the last value:

*** Variables ***
${EXAMPLE}      This value is joined
...             together with a space.
${MULTILINE}    First line.
...             Second line.
...             Third line.
...             separator=\n

The separator option is new in Robot Framework 7.0, but also older versions support configuring the separator. With them the first value can contain a special SEPARATOR marker:

*** Variables ***
${MULTILINE}    SEPARATOR=\n
...             First line.
...             Second line.
...             Third line.

Both the separator option and the SEPARATOR marker are case-sensitive. Using the separator option is recommended, unless there is a need to support also older versions.

Creating list variables

Creating list variables is as easy as creating scalar variables. Again, the variable name is in the first column of the Variable section and values in the subsequent columns. A list variable can have any number of values, starting from zero, and if many values are needed, they can be split into several rows.

*** Variables ***
@{NAMES}        Matti       Teppo
@{NAMES2}       @{NAMES}    Seppo
@{NOTHING}
@{MANY}         one         two      three      four
...             five        six      seven
Creating dictionary variables

Dictionary variables can be created in the Variable section similarly as list variables. The difference is that items need to be created using name=value syntax or existing dictionary variables. If there are multiple items with same name, the last value has precedence. If a name contains a literal equal sign, it can be escaped with a backslash like \=.

*** Variables ***
&{USER 1}       name=Matti    address=xxx         phone=123
&{USER 2}       name=Teppo    address=yyy         phone=456
&{MANY}         first=1       second=${2}         ${3}=third
&{EVEN MORE}    &{MANY}       first=override      empty=
...             =empty        key\=here=value

Dictionary variables have two extra properties compared to normal Python dictionaries. First of all, values of these dictionaries can be accessed like attributes, which means that it is possible to use extended variable syntax like ${VAR.key}. This only works if the key is a valid attribute name and does not match any normal attribute Python dictionaries have. For example, individual value &{USER}[name] can also be accessed like ${USER.name} (notice that $ is needed in this context), but using ${MANY.3} is not possible.

Tip

With nested dictionary variables keys are accessible like ${VAR.nested.key}. This eases working with nested data structures.

Another special property of dictionary variables is that they are ordered. This means that if these dictionaries are iterated, their items always come in the order they are defined. This can be useful if dictionaries are used as list variables with FOR loops or otherwise. When a dictionary is used as a list variable, the actual value contains dictionary keys. For example, @{MANY} variable would have value ['first', 'second', 3].

Creating variable name based on another variable

Starting from Robot Framework 7.0, it is possible to create the variable name dynamically based on another variable:

*** Variables ***
${X}        Y
${${X}}     Z    # Name is created based on '${X}'.

*** Test Cases ***
Dynamically created name
    Should Be Equal    ${Y}    Z

Variable file

Variable files are the most powerful mechanism for creating different kind of variables. It is possible to assign variables to any object using them, and they also enable creating variables dynamically. The variable file syntax and taking variable files into use is explained in section Resource and variable files.

Setting variables in command line

Variables can be set from the command line either individually with the --variable (-v) option or using a variable file with the --variablefile (-V) option. Variables set from the command line are globally available for all executed test data files, and they also override possible variables with the same names in the Variable section and in variable files imported in the test data.

The syntax for setting individual variables is --variable name:value, where name is the name of the variable without ${} and value is its value. Several variables can be set by using this option several times. Only scalar variables can be set using this syntax and they can only get string values.

--variable EXAMPLE:value
--variable HOST:localhost:7272 --variable USER:robot

In the examples above, variables are set so that

  • ${EXAMPLE} gets the value value
  • ${HOST} and ${USER} get the values localhost:7272 and robot

The basic syntax for taking variable files into use from the command line is --variablefile path/to/variables.py, and Taking variable files into use section has more details. What variables actually are created depends on what variables there are in the referenced variable file.

If both variable files and individual variables are given from the command line, the latter have higher priority.

Return values from keywords

Return values from keywords can also be set into variables. This allows communication between different keywords even in different test libraries.

Variables set in this manner are otherwise similar to any other variables, but they are available only in the local scope where they are created. Thus it is not possible, for example, to set a variable like this in one test case and use it in another. This is because, in general, automated test cases should not depend on each other, and accidentally setting a variable that is used elsewhere could cause hard-to-debug errors. If there is a genuine need for setting a variable in one test case and using it in another, it is possible to use BuiltIn keywords as explained in the next section.

Assigning scalar variables

Any value returned by a keyword can be assigned to a scalar variable. As illustrated by the example below, the required syntax is very simple:

*** Test Cases ***
Returning
    ${x} =    Get X    an argument
    Log    We got ${x}!

In the above example the value returned by the Get X keyword is first set into the variable ${x} and then used by the Log keyword. Having the equals sign = after the variable name is not obligatory, but it makes the assignment more explicit. Creating local variables like this works both in test case and user keyword level.

Notice that although a value is assigned to a scalar variable, it can be used as a list variable if it has a list-like value and as a dictionary variable if it has a dictionary-like value.

*** Test Cases ***
Example
    ${list} =    Create List    first    second    third
    Length Should Be    ${list}    3
    Log Many    @{list}
Assigning variables with item values

Starting from Robot Framework 6.1, when working with variables that support item assignment such as lists or dictionaries, it is possible to set their values by specifying the index or key of the item using the syntax ${var}[item] where the item part can itself contain a variable:

*** Test Cases ***
Item assignment to list
    ${list} =          Create List      one    two    three    four
    ${list}[0] =       Set Variable     first
    ${list}[${1}] =    Set Variable     second
    ${list}[2:3] =     Evaluate         ['third']
    ${list}[-1] =      Set Variable     last
    Log Many           @{list}          # Logs 'first', 'second', 'third' and 'last'

Item assignment to dictionary
    ${dict} =                Create Dictionary    first_name=unknown
    ${dict}[first_name] =    Set Variable         John
    ${dict}[last_name] =     Set Variable         Doe
    Log                      ${dictionary}        # Logs {'first_name': 'John', 'last_name': 'Doe'}
Creating variable name based on another variable

Starting from Robot Framework 7.0, it is possible to create the name of the assigned variable dynamically based on another variable:

*** Test Cases ***
Dynamically created name
    ${x} =    Set Variable    y
    ${${x}} =    Set Variable    z    # Name is created based on '${x}'.
    Should Be Equal    ${y}    z
Assigning list variables

If a keyword returns a list or any list-like object, it is possible to assign it to a list variable:

*** Test Cases ***
Example
    @{list} =    Create List    first    second    third
    Length Should Be    ${list}    3
    Log Many    @{list}

Because all Robot Framework variables are stored in the same namespace, there is not much difference between assigning a value to a scalar variable or a list variable. This can be seen by comparing the last two examples above. The main differences are that when creating a list variable, Robot Framework automatically verifies that the value is a list or list-like, and the stored variable value will be a new list created from the return value. When assigning to a scalar variable, the return value is not verified and the stored value will be the exact same object that was returned.

Assigning dictionary variables

If a keyword returns a dictionary or any dictionary-like object, it is possible to assign it to a dictionary variable:

*** Test Cases ***
Example
    &{dict} =    Create Dictionary    first=1    second=${2}    ${3}=third
    Length Should Be    ${dict}    3
    Do Something    &{dict}
    Log    ${dict.first}

Because all Robot Framework variables are stored in the same namespace, it would also be possible to assign a dictionary into a scalar variable and use it later as a dictionary when needed. There are, however, some actual benefits in creating a dictionary variable explicitly. First of all, Robot Framework verifies that the returned value is a dictionary or dictionary-like similarly as it verifies that list variables can only get a list-like value.

A bigger benefit is that the value is converted into a special dictionary that it uses also when creating dictionary variables in the Variable section. Values in these dictionaries can be accessed using attribute access like ${dict.first} in the above example. These dictionaries are also ordered, but if the original dictionary was not ordered, the resulting order is arbitrary.

Assigning multiple variables

If a keyword returns a list or a list-like object, it is possible to assign individual values into multiple scalar variables or into scalar variables and a list variable.

*** Test Cases ***
Assign multiple
    ${a}    ${b}    ${c} =    Get Three
    ${first}    @{rest} =    Get Three
    @{before}    ${last} =    Get Three
    ${begin}    @{middle}    ${end} =    Get Three

Assuming that the keyword Get Three returns a list [1, 2, 3], the following variables are created:

  • ${a}, ${b} and ${c} with values 1, 2, and 3, respectively.
  • ${first} with value 1, and @{rest} with value [2, 3].
  • @{before} with value [1, 2] and ${last} with value 3.
  • ${begin} with value 1, @{middle} with value [2] and ${end} with value 3.

It is an error if the returned list has more or less values than there are scalar variables to assign. Additionally, only one list variable is allowed and dictionary variables can only be assigned alone.

Automatically logging assigned variable value

To make it easier to understand what happens during execution, the beginning of value that is assigned is automatically logged. The default is to show 200 first characters, but this can be changed by using the --maxassignlength command line option when running tests. If the value is zero or negative, the whole assigned value is hidden.

--maxassignlength 1000
--maxassignlength 0

The reason the value is not logged fully is that it could be really big. If you always want to see a certain value fully, it is possible to use the BuiltIn Log keyword to log it after the assignment.

Note

The --maxassignlength option is new in Robot Framework 5.0.

VAR syntax

Starting from Robot Framework 7.0, it is possible to create variables inside tests and user keywords using the VAR syntax. The VAR marker is case-sensitive and it must be followed by a variable name and value. Other than the mandatory VAR, the overall syntax is mostly the same as when creating variables in the Variable section.

The new syntax is aims to make creating variables simpler and more uniform. It is especially indented to replace the BuiltIn keywords Set Variable, Set Test Variable, Set Suite Variable and Set Global Variable, but it can be used instead of Catenate, Create List and Create Dictionary as well.

Creating scalar variables

In simple cases scalar variables are created by just giving a variable name and its value. The value can be a hard-coded string or it can itself contain a variable. If the value is long, it is possible to split it into multiple columns and rows. In that case parts are joined together with a space by default, but the separator to use can be specified with the separator configuration option. It is possible to have an optional = after the variable name the same way as when creating variables based on return values from keywords and in the Variable section.

*** Test Cases ***
Scalar examples
     VAR    ${simple}       variable
     VAR    ${equals} =     this works too
     VAR    ${variable}     value contains ${simple}
     VAR    ${sentence}     This is a bit longer variable value
     ...                    that is split into multiple rows.
     ...                    These parts are joined with a space.
     VAR    ${multiline}    This is another longer value.
     ...                    This time there is a custom separator.
     ...                    As the result this becomes a multiline string.
     ...                    separator=\n
Creating list and dictionary variables

List and dictionary variables are created similarly as scalar variables. When creating dictionaries, items must be specified using the name=value syntax.

*** Test Cases ***
List examples
     VAR    @{two items}     Robot    Framework
     VAR    @{empty list}
     VAR    @{lot of stuff}
     ...    first item
     ...    second item
     ...    third item
     ...    fourth item
     ...    last item

Dictionary examples
     VAR    &{two items}     name=Robot Framework    url=http://robotframework.org
     VAR    &{empty dict}
     VAR    &{lot of stuff}
     ...    first=1
     ...    second=2
     ...    third=3
     ...    fourth=4
     ...    last=5
Scope

Variables created with the VAR syntax are are available only within the test or user keyword where they are created. That can, however, be altered by using the scope configuration option. Supported values are:

LOCAL
Make the variable available in the current local scope. This is the default.
TEST
Make the variable available within the current test. This includes all keywords called by the test.
TASK
Alias for TEST that can be used when creating tasks.
SUITE
Make the variable available within the current suite. This includes all subsequent tests in that suite, but not tests in possible child suites.
SUITES
Make the variable available within the current suite and in its child suites. New in Robot Framework 7.1.
GLOBAL
Make the variable available globally. This includes all subsequent keywords and tests.

Although Robot Framework variables are case-insensitive, it is recommended to use capital letters with non-local variable names.

*** Variables ***
${SUITE}         this value is overridden

*** Test Cases ***
Scope example
    VAR    ${local}     local value
    VAR    ${TEST}      test value            scope=TEST
    VAR    ${SUITE}     suite value           scope=SUITE
    VAR    ${SUITES}    nested suite value    scope=SUITES
    VAR    ${GLOBAL}    global value          scope=GLOBAL
    Should Be Equal    ${local}     local value
    Should Be Equal    ${TEST}      test value
    Should Be Equal    ${SUITE}     suite value
    Should Be Equal    ${SUITES}    nested suite value
    Should Be Equal    ${GLOBAL}    global value
    Keyword
    Should Be Equal    ${TEST}      new test value
    Should Be Equal    ${SUITE}     new suite value
    Should Be Equal    ${SUITES}    new nested suite value
    Should Be Equal    ${GLOBAL}    new global value

Scope example, part 2
    Should Be Equal    ${SUITE}     new suite value
    Should Be Equal    ${SUITES}    new nested suite value
    Should Be Equal    ${GLOBAL}    new global value

*** Keywords ***
Keyword
    Should Be Equal    ${TEST}      test value
    Should Be Equal    ${SUITE}     suite value
    Should Be Equal    ${SUITES}    nested suite value
    Should Be Equal    ${GLOBAL}    global value
    VAR    ${TEST}      new ${TEST}      scope=TEST
    VAR    ${SUITE}     new ${SUITE}     scope=SUITE
    VAR    ${SUITES}    new ${SUITES}    scope=SUITES
    VAR    ${GLOBAL}    new ${GLOBAL}    scope=GLOBAL
    Should Be Equal    ${TEST}      new test value
    Should Be Equal    ${SUITE}     new suite value
    Should Be Equal    ${SUITES}    new nested suite value
    Should Be Equal    ${GLOBAL}    new global value
Creating variables conditionally

The VAR syntax works with IF/ELSE structures which makes it easy to create variables conditionally. In simple cases using inline IF can be convenient.

*** Test Cases ***
IF/ELSE example
    IF    "${ENV}" == "devel"
        VAR    ${address}    127.0.0.1
        VAR    ${name}       demo
    ELSE
        VAR    ${address}    192.168.1.42
        VAR    ${name}       robot
    END

Inline IF
    IF    "${ENV}" == "devel"    VAR    ${name}    demo    ELSE    VAR    ${name}    robot
Creating variable name based on another variable

If there is a need, variable name can also be created dynamically based on another variable.

*** Test Cases ***
Dynamic name
    VAR    ${x}       y    # Normal assignment.
    VAR    ${${x}}    z    # Name created dynamically.
    Should Be Equal    ${y}    z

Using Set Test/Suite/Global Variable keywords

Note

The VAR syntax is recommended over these keywords when using Robot Framework 7.0 or newer.

The BuiltIn library has keywords Set Test Variable, Set Suite Variable and Set Global Variable which can be used for setting variables dynamically during the test execution. If a variable already exists within the new scope, its value will be overwritten, and otherwise a new variable is created.

Variables set with Set Test Variable keyword are available everywhere within the scope of the currently executed test case. For example, if you set a variable in a user keyword, it is available both in the test case level and also in all other user keywords used in the current test. Other test cases will not see variables set with this keyword. It is an error to call Set Test Variable outside the scope of a test (e.g. in a Suite Setup or Teardown).

Variables set with Set Suite Variable keyword are available everywhere within the scope of the currently executed test suite. Setting variables with this keyword thus has the same effect as creating them using the Variable section in the test data file or importing them from variable files. Other test suites, including possible child test suites, will not see variables set with this keyword.

Variables set with Set Global Variable keyword are globally available in all test cases and suites executed after setting them. Setting variables with this keyword thus has the same effect as creating from the command line using the options --variable or --variablefile. Because this keyword can change variables everywhere, it should be used with care.

Note

Set Test/Suite/Global Variable keywords set named variables directly into test, suite or global variable scope and return nothing. On the other hand, another BuiltIn keyword Set Variable sets local variables using return values.

2.6.4   Built-in variables

Robot Framework provides some built-in variables that are available automatically.

Operating-system variables

Built-in variables related to the operating system ease making the test data operating-system-agnostic.

Available operating-system-related built-in variables
Variable Explanation
${CURDIR} An absolute path to the directory where the test data file is located. This variable is case-sensitive.
${TEMPDIR} An absolute path to the system temporary directory. In UNIX-like systems this is typically /tmp, and in Windows c:\Documents and Settings\<user>\Local Settings\Temp.
${EXECDIR} An absolute path to the directory where test execution was started from.
${/} The system directory path separator. / in UNIX-like systems and \ in Windows.
${:} The system path element separator. : in UNIX-like systems and ; in Windows.
${\n} The system line separator. \n in UNIX-like systems and \r\n in Windows.
*** Test Cases ***
Example
    Create Binary File    ${CURDIR}${/}input.data    Some text here${\n}on two lines
    Set Environment Variable    CLASSPATH    ${TEMPDIR}${:}${CURDIR}${/}foo.jar

Number variables

The variable syntax can be used for creating both integers and floating point numbers, as illustrated in the example below. This is useful when a keyword expects to get an actual number, and not a string that just looks like a number, as an argument.

*** Test Cases ***
Example 1A
    Connect    example.com    80       # Connect gets two strings as arguments

Example 1B
    Connect    example.com    ${80}    # Connect gets a string and an integer

Example 2
    Do X    ${3.14}    ${-1e-4}        # Do X gets floating point numbers 3.14 and -0.0001

It is possible to create integers also from binary, octal, and hexadecimal values using 0b, 0o and 0x prefixes, respectively. The syntax is case insensitive.

*** Test Cases ***
Example
    Should Be Equal    ${0b1011}    ${11}
    Should Be Equal    ${0o10}      ${8}
    Should Be Equal    ${0xff}      ${255}
    Should Be Equal    ${0B1010}    ${0XA}

Boolean and None/null variables

Also Boolean values and Python None can be created using the variable syntax similarly as numbers.

*** Test Cases ***
Boolean
    Set Status    ${true}               # Set Status gets Boolean true as an argument
    Create Y    something   ${false}    # Create Y gets a string and Boolean false

None
    Do XYZ    ${None}                   # Do XYZ gets Python None as an argument

These variables are case-insensitive, so for example ${True} and ${true} are equivalent.

Space and empty variables

It is possible to create spaces and empty strings using variables ${SPACE} and ${EMPTY}, respectively. These variables are useful, for example, when there would otherwise be a need to escape spaces or empty cells with a backslash. If more than one space is needed, it is possible to use the extended variable syntax like ${SPACE * 5}. In the following example, Should Be Equal keyword gets identical arguments but those using variables are easier to understand than those using backslashes.

*** Test Cases ***
One space
    Should Be Equal    ${SPACE}          \ \

Four spaces
    Should Be Equal    ${SPACE * 4}      \ \ \ \ \

Ten spaces
    Should Be Equal    ${SPACE * 10}     \ \ \ \ \ \ \ \ \ \ \

Quoted space
    Should Be Equal    "${SPACE}"        " "

Quoted spaces
    Should Be Equal    "${SPACE * 2}"    " \ "

Empty
    Should Be Equal    ${EMPTY}          \

There is also an empty list variable @{EMPTY} and an empty dictionary variable &{EMPTY}. Because they have no content, they basically vanish when used somewhere in the test data. They are useful, for example, with test templates when the template keyword is used without arguments or when overriding list or dictionary variables in different scopes. Modifying the value of @{EMPTY} or &{EMPTY} is not possible.

*** Test Cases ***
Template
    [Template]    Some keyword
    @{EMPTY}

Override
    Set Global Variable    @{LIST}    @{EMPTY}
    Set Suite Variable     &{DICT}    &{EMPTY}

Note

${SPACE} represents the ASCII space (\x20) and other spaces should be specified using the escape sequences like \xA0 (NO-BREAK SPACE) and \u3000 (IDEOGRAPHIC SPACE).

Automatic variables

Some automatic variables can also be used in the test data. These variables can have different values during the test execution and some of them are not even available all the time. Altering the value of these variables does not affect the original values, but some values can be changed dynamically using keywords from the BuiltIn library.

Available automatic variables
Variable Explanation Available
${TEST NAME} The name of the current test case. Test case
@{TEST TAGS} Contains the tags of the current test case in alphabetical order. Can be modified dynamically using Set Tags and Remove Tags keywords. Test case
${TEST DOCUMENTATION} The documentation of the current test case. Can be set dynamically using using Set Test Documentation keyword. Test case
${TEST STATUS} The status of the current test case, either PASS or FAIL. Test teardown
${TEST MESSAGE} The message of the current test case. Test teardown
${PREV TEST NAME} The name of the previous test case, or an empty string if no tests have been executed yet. Everywhere
${PREV TEST STATUS} The status of the previous test case: either PASS, FAIL, or an empty string when no tests have been executed. Everywhere
${PREV TEST MESSAGE} The possible error message of the previous test case. Everywhere
${SUITE NAME} The full name of the current test suite. Everywhere
${SUITE SOURCE} An absolute path to the suite file or directory. Everywhere
${SUITE DOCUMENTATION} The documentation of the current test suite. Can be set dynamically using using Set Suite Documentation keyword. Everywhere
&{SUITE METADATA} The free metadata of the current test suite. Can be set using Set Suite Metadata keyword. Everywhere
${SUITE STATUS} The status of the current test suite, either PASS or FAIL. Suite teardown
${SUITE MESSAGE} The full message of the current test suite, including statistics. Suite teardown
${KEYWORD STATUS} The status of the current keyword, either PASS or FAIL. User keyword teardown
${KEYWORD MESSAGE} The possible error message of the current keyword. User keyword teardown
${LOG LEVEL} Current log level. Everywhere
${OUTPUT DIR} An absolute path to the output directory as a string. Everywhere
${OUTPUT FILE} An absolute path to the output file as a string or a string NONE if the output file is not created. Everywhere
${LOG FILE} An absolute path to the log file as a string or a string NONE if the log file is not created. Everywhere
${REPORT FILE} An absolute path to the report file as a string or a string NONE if the report file is not created. Everywhere
${DEBUG FILE} An absolute path to the debug file as a string or a string NONE if the debug file is not created. Everywhere
&{OPTIONS}

A dictionary exposing command line options. The dictionary keys match the command line options and can be accessed both like ${OPTIONS}[key] and ${OPTIONS.key}. Available options:

  • ${OPTIONS.exclude} (--exclude)
  • ${OPTIONS.include} (--include)
  • ${OPTIONS.skip} (--skip)
  • ${OPTIONS.skip_on_failure} (--skip-on-failure)
  • ${OPTIONS.console_width} (--console-width)

${OPTIONS} itself was added in RF 5.0 and ${OPTIONS.console_width} in RF 7.1. More options can be exposed later.

Everywhere

Suite related variables ${SUITE SOURCE}, ${SUITE NAME}, ${SUITE DOCUMENTATION} and &{SUITE METADATA} as well as options related to command line options like ${LOG FILE} and &{OPTIONS} are available already when libraries and variable files are imported. Possible variables in these automatic variables are not yet resolved at the import time, though.

2.6.5   Variable priorities and scopes

Variables coming from different sources have different priorities and are available in different scopes.

Variable priorities

Variables from the command line

Variables set in the command line have the highest priority of all variables that can be set before the actual test execution starts. They override possible variables created in Variable sections in test case files, as well as in resource and variable files imported in the test data.

Individually set variables (--variable option) override the variables set using variable files (--variablefile option). If you specify same individual variable multiple times, the one specified last will override earlier ones. This allows setting default values for variables in a start-up script and overriding them from the command line. Notice, though, that if multiple variable files have same variables, the ones in the file specified first have the highest priority.

Variable section in a test case file

Variables created using the Variable section in a test case file are available for all the test cases in that file. These variables override possible variables with same names in imported resource and variable files.

Variables created in the Variable sections are available in all other sections in the file where they are created. This means that they can be used also in the Setting section, for example, for importing more variables from resource and variable files.

Imported resource and variable files

Variables imported from the resource and variable files have the lowest priority of all variables created in the test data. Variables from resource files and variable files have the same priority. If several resource and/or variable file have same variables, the ones in the file imported first are taken into use.

If a resource file imports resource files or variable files, variables in its own Variable section have a higher priority than variables it imports. All these variables are available for files that import this resource file.

Note that variables imported from resource and variable files are not available in the Variable section of the file that imports them. This is due to the Variable section being processed before the Setting section where the resource files and variable files are imported.

Variables set during test execution

Variables set during the test execution either using return values from keywords or using Set Test/Suite/Global Variable keywords always override possible existing variables in the scope where they are set. In a sense they thus have the highest priority, but on the other hand they do not affect variables outside the scope they are defined.

Built-in variables

Built-in variables like ${TEMPDIR} and ${TEST_NAME} have the highest priority of all variables. They cannot be overridden using Variable section or from command line, but even they can be reset during the test execution. An exception to this rule are number variables, which are resolved dynamically if no variable is found otherwise. They can thus be overridden, but that is generally a bad idea. Additionally ${CURDIR} is special because it is replaced already during the test data processing time.

Variable scopes

Depending on where and how they are created, variables can have a global, test suite, test case or local scope.

Global scope

Global variables are available everywhere in the test data. These variables are normally set from the command line with the --variable and --variablefile options, but it is also possible to create new global variables or change the existing ones by using the VAR syntax or the Set Global Variable keyword anywhere in the test data. Additionally also built-in variables are global.

It is recommended to use capital letters with all global variables.

Test suite scope

Variables with the test suite scope are available anywhere in the test suite where they are defined or imported. They can be created in Variable sections, imported from resource and variable files, or set during the test execution using the VAR syntax or the Set Suite Variable keyword.

The test suite scope is not recursive, which means that variables available in a higher-level test suite are not available in lower-level suites. If necessary, resource and variable files can be used for sharing variables.

Since these variables can be considered global in the test suite where they are used, it is recommended to use capital letters also with them.

Test case scope

Variables with the test case scope are visible in a test case and in all user keywords the test uses. Initially there are no variables in this scope, but it is possible to create them by using the VAR syntax or the Set Test Variable keyword anywhere in a test case. Trying to create test variables in suite setup or suite teardown causes and error.

Also variables in the test case scope are to some extend global. It is thus generally recommended to use capital letters with them too.

Local scope

Test cases and user keywords have a local variable scope that is not seen by other tests or keywords. Local variables can be created using return values from executed keywords and with the VAR syntax, and user keywords also get them as arguments.

It is recommended to use lower-case letters with local variables.

2.6.6   Advanced variable features

Extended variable syntax

Extended variable syntax allows accessing attributes of an object assigned to a variable (for example, ${object.attribute}) and even calling its methods (for example, ${obj.getName()}). It works both with scalar and list variables, but is mainly useful with the former.

Extended variable syntax is a powerful feature, but it should be used with care. Accessing attributes is normally not a problem, on the contrary, because one variable containing an object with several attributes is often better than having several variables. On the other hand, calling methods, especially when they are used with arguments, can make the test data pretty complicated to understand. If that happens, it is recommended to move the code into a test library.

The most common usages of extended variable syntax are illustrated in the example below. First assume that we have the following variable file and test case:

class MyObject:

    def __init__(self, name):
        self.name = name

    def eat(self, what):
        return '%s eats %s' % (self.name, what)

    def __str__(self):
        return self.name

OBJECT = MyObject('Robot')
DICTIONARY = {1: 'one', 2: 'two', 3: 'three'}
*** Test Cases ***
Example
    KW 1    ${OBJECT.name}
    KW 2    ${OBJECT.eat('Cucumber')}
    KW 3    ${DICTIONARY[2]}

When this test data is executed, the keywords get the arguments as explained below:

  • KW 1 gets string Robot
  • KW 2 gets string Robot eats Cucumber
  • KW 3 gets string two

The extended variable syntax is evaluated in the following order:

  1. The variable is searched using the full variable name. The extended variable syntax is evaluated only if no matching variable is found.
  2. The name of the base variable is created. The body of the name consists of all the characters after the opening { until the first occurrence of a character that is not an alphanumeric character or a space. For example, base variables of ${OBJECT.name} and ${DICTIONARY[2]}) are OBJECT and DICTIONARY, respectively.
  3. A variable matching the body is searched. If there is no match, an exception is raised and the test case fails.
  4. The expression inside the curly brackets is evaluated as a Python expression, so that the base variable name is replaced with its value. If the evaluation fails because of an invalid syntax or that the queried attribute does not exist, an exception is raised and the test fails.
  5. The whole extended variable is replaced with the value returned from the evaluation.

Many standard Python objects, including strings and numbers, have methods that can be used with the extended variable syntax either explicitly or implicitly. Sometimes this can be really useful and reduce the need for setting temporary variables, but it is also easy to overuse it and create really cryptic test data. Following examples show few pretty good usages.

*** Test Cases ***
String
    ${string} =    Set Variable    abc
    Log    ${string.upper()}      # Logs 'ABC'
    Log    ${string * 2}          # Logs 'abcabc'

Number
    ${number} =    Set Variable    ${-2}
    Log    ${number * 10}         # Logs -20
    Log    ${number.__abs__()}    # Logs 2

Note that even though abs(number) is recommended over number.__abs__() in normal Python code, using ${abs(number)} does not work. This is because the variable name must be in the beginning of the extended syntax. Using __xxx__ methods in the test data like this is already a bit questionable, and it is normally better to move this kind of logic into test libraries.

Extended variable syntax works also in list variable context. If, for example, an object assigned to a variable ${EXTENDED} has an attribute attribute that contains a list as a value, it can be used as a list variable @{EXTENDED.attribute}.

Extended variable assignment

It is possible to set attributes of objects stored to scalar variables using keyword return values and a variation of the extended variable syntax. Assuming we have variable ${OBJECT} from the previous examples, attributes could be set to it like in the example below.

*** Test Cases ***
Example
    ${OBJECT.name} =    Set Variable    New name
    ${OBJECT.new_attr} =    Set Variable    New attribute

The extended variable assignment syntax is evaluated using the following rules:

  1. The assigned variable must be a scalar variable and have at least one dot. Otherwise the extended assignment syntax is not used and the variable is assigned normally.
  2. If there exists a variable with the full name (e.g. ${OBJECT.name} in the example above) that variable will be assigned a new value and the extended syntax is not used.
  3. The name of the base variable is created. The body of the name consists of all the characters between the opening ${ and the last dot, for example, OBJECT in ${OBJECT.name} and foo.bar in ${foo.bar.zap}. As the second example illustrates, the base name may contain normal extended variable syntax.
  4. The name of the attribute to set is created by taking all the characters between the last dot and the closing }, for example, name in ${OBJECT.name}. If the name does not start with a letter or underscore and contain only these characters and numbers, the attribute is considered invalid and the extended syntax is not used. A new variable with the full name is created instead.
  5. A variable matching the base name is searched. If no variable is found, the extended syntax is not used and, instead, a new variable is created using the full variable name.
  6. If the found variable is a string or a number, the extended syntax is ignored and a new variable created using the full name. This is done because you cannot add new attributes to Python strings or numbers, and this way the new syntax is also less backwards-incompatible.
  7. If all the previous rules match, the attribute is set to the base variable. If setting fails for any reason, an exception is raised and the test fails.

Note

Unlike when assigning variables normally using return values from keywords, changes to variables done using the extended assign syntax are not limited to the current scope. Because no new variable is created but instead the state of an existing variable is changed, all tests and keywords that see that variable will also see the changes.

Variables inside variables

Variables are allowed also inside variables, and when this syntax is used, variables are resolved from the inside out. For example, if you have a variable ${var${x}}, then ${x} is resolved first. If it has the value name, the final value is then the value of the variable ${varname}. There can be several nested variables, but resolving the outermost fails, if any of them does not exist.

In the example below, Do X gets the value ${JOHN HOME} or ${JANE HOME}, depending on if Get Name returns john or jane. If it returns something else, resolving ${${name} HOME} fails.

*** Variables ***
${JOHN HOME}    /home/john
${JANE HOME}    /home/jane

*** Test Cases ***
Example
    ${name} =    Get Name
    Do X    ${${name} HOME}

Inline Python evaluation

Variable syntax can also be used for evaluating Python expressions. The basic syntax is ${{expression}} i.e. there are double curly braces around the expression. The expression can be any valid Python expression such as ${{1 + 2}} or ${{['a', 'list']}}. Spaces around the expression are allowed, so also ${{ 1 + 2 }} and ${{ ['a', 'list'] }} are valid. In addition to using normal scalar variables, also list variables and dictionary variables support @{{expression}} and &{{expression}} syntax, respectively.

Main usages for this pretty advanced functionality are:

  • Evaluating Python expressions involving Robot Framework's variables (${{len('${var}') > 3}}, ${{$var[0] if $var is not None else None}}).
  • Creating values that are not Python base types (${{decimal.Decimal('0.11')}}, ${{datetime.date(2019, 11, 5)}}).
  • Creating values dynamically (${{random.randint(0, 100)}}, ${{datetime.date.today()}}).
  • Constructing collections, especially nested collections (${{[1, 2, 3, 4]}}, ${{ {'id': 1, 'name': 'Example', 'children': [7, 9]} }}).
  • Accessing constants and other useful attributes in Python modules (${{math.pi}}, ${{platform.system()}}).

This is somewhat similar functionality than the extended variable syntax discussed earlier. As the examples above illustrate, this syntax is even more powerful as it provides access to Python built-ins like len() and modules like math. In addition to being able to use variables like ${var} in the expressions (they are replaced before evaluation), variables are also available using the special $var syntax during evaluation. The whole expression syntax is explained in the Evaluating expressions appendix.

Tip

Instead of creating complicated expressions, it is often better to move the logic into a custom library. That eases maintenance, makes test data easier to understand and can also enhance execution speed.

Note

The inline Python evaluation syntax is new in Robot Framework 3.2.

2.7   Creating user keywords

Keyword sections are used to create new higher-level keywords by combining existing keywords together. These keywords are called user keywords to differentiate them from lowest level library keywords that are implemented in test libraries. The syntax for creating user keywords is very close to the syntax for creating test cases, which makes it easy to learn.

2.7.1   User keyword syntax

Basic syntax

In many ways, the overall user keyword syntax is identical to the test case syntax. User keywords are created in Keyword sections which differ from Test Case sections only by the name that is used to identify them. User keyword names are in the first column similarly as test cases names. Also user keywords are created from keywords, either from keywords in test libraries or other user keywords. Keyword names are normally in the second column, but when setting variables from keyword return values, they are in the subsequent columns.

*** Keywords ***
Open Login Page
    Open Browser    http://host/login.html
    Title Should Be    Login Page

Title Should Start With
    [Arguments]    ${expected}
    ${title} =    Get Title
    Should Start With    ${title}    ${expected}

Most user keywords take some arguments. This important feature is used already in the second example above, and it is explained in detail later in this section, similarly as user keyword return values.

User keywords can be created in suite files, resource files, and suite initialization files. Keywords created in resource files are available for files using them, whereas other keywords are only available in the files where they are created.

Settings in the Keyword section

User keywords can have similar settings as test cases, and they have the same square bracket syntax separating them from keyword names. All available settings are listed below and explained later in this section.

[Documentation]
Used for setting a user keyword documentation.
[Tags]
Sets tags for the keyword.
[Arguments]
Specifies user keyword arguments.
[Setup], [Teardown]
Specify user keyword setup and teardown. [Setup] is new in Robot Framework 7.0.
[Timeout]
Sets the possible user keyword timeout. Timeouts are discussed in a section of their own.
[Return]
Specifies user keyword return values. Deprecated in Robot Framework 7.0, the RETURN statement should be used instead.

Note

The format used above is recommended, but setting names are case-insensitive and spaces are allowed between brackets and the name. For example, [ TAGS ]:setting is valid.

2.7.2   User keyword name and documentation

The user keyword name is defined in the first column of the Keyword section. Of course, the name should be descriptive, and it is acceptable to have quite long keyword names. Actually, when creating use-case-like test cases, the highest-level keywords are often formulated as sentences or even paragraphs.

User keywords can have a documentation that is set with the [Documentation] setting. It supports same formatting, splitting to multiple lines, and other features as test case documentation. This setting documents the user keyword in the test data. It is also shown in a more formal keyword documentation, which the Libdoc tool can create from resource files. Finally, the first logical row of the documentation, until the first empty row, is shown as a keyword documentation in test logs.

*** Keywords ***
One line documentation
    [Documentation]    One line documentation.
    No Operation

Multiline documentation
    [Documentation]    The first line creates the short doc.
    ...
    ...                This is the body of the documentation.
    ...                It is not shown in Libdoc outputs but only
    ...                the short doc is shown in logs.
    No Operation

Short documentation in multiple lines
    [Documentation]    If the short doc gets longer, it can span
    ...                multiple physical lines.
    ...
    ...                The body is separated from the short doc with
    ...                an empty line.
    No Operation

Sometimes keywords need to be removed, replaced with new ones, or deprecated for other reasons. User keywords can be marked deprecated by starting the documentation with *DEPRECATED*, which will cause a warning when the keyword is used. For more information, see the Deprecating keywords section.

Note

Prior to Robot Framework 3.1, the short documentation contained only the first physical line of the keyword documentation.

2.7.3   User keyword tags

Both user keywords and library keywords can have tags. Similarly as when tagging test cases, there are two settings affecting user keyword tags:

Keyword Tags setting in the Settings section
All keywords in a file with this setting always get specified tags.
[Tags] setting with each keyword
Keywords get these tags in addition to possible tags specified using the Keyword Tags setting. The [Tags] setting also allows removing tags set with Keyword Tags by using the -tag syntax.
*** Settings ***
Keyword Tags       gui    html

*** Keywords ***
No own tags
    [Documentation]    Keyword has tags 'gui' and 'html'.
    No Operation

Own tags
    [Documentation]    Keyword has tags 'gui', 'html', 'own' and 'tags'.
    [Tags]    own    tags
    No Operation

Remove common tag
    [Documentation]    Test has tags 'gui' and 'own'.
    [Tags]    own    -html
    No Operation

Keyword tags can be specified using variables, the -tag syntax supports patterns, and so on, exactly as test case tags.

In addition to using the dedicated settings, keyword tags can be specified on the last line of the documentation with Tags: prefix so that tags are separated with a comma. For example, following two keywords get same three tags:

*** Keywords ***
Settings tags using separate setting
    [Tags]    my    fine    tags
    No Operation

Settings tags using documentation
    [Documentation]    I have documentation. And my documentation has tags.
    ...                Tags: my, fine, tags
    No Operation

Keyword tags are shown in logs and in documentation generated by Libdoc, where the keywords can also be searched based on tags. The --removekeywords and --flattenkeywords commandline options also support selecting keywords by tag, and new usages for keywords tags are possibly added in later releases.

Similarly as with test case tags, user keyword tags with the robot: prefix are reserved for special features by Robot Framework itself. Users should thus not use any tag with these prefixes unless actually activating the special functionality. Starting from Robot Framework 6.1, flattening keyword during execution time can be taken into use using reserved tag robot:flatten.

Note

Keyword Tags is new in Robot Framework 6.0. With earlier versions all keyword tags need to be specified using the [Tags] setting.

Note

The -tag syntax for removing common tags is new in Robot Framework 7.0.

2.7.4   User keyword arguments

Most user keywords need to take some arguments. The syntax for specifying them is probably the most complicated feature normally needed with Robot Framework, but even that is relatively easy, particularly in most common cases. Arguments are normally specified with the [Arguments] setting, and argument names use the same syntax as variables, for example ${arg}.

Positional arguments with user keywords

The simplest way to specify arguments (apart from not having them at all) is using only positional arguments. In most cases, this is all that is needed.

The syntax is such that first the [Arguments] setting is given and then argument names are defined in the subsequent cells. Each argument is in its own cell, using the same syntax as with variables. The keyword must be used with as many arguments as there are argument names in its signature. The actual argument names do not matter to the framework, but from users' perspective they should be as descriptive as possible. It is recommended to use lower-case letters in variable names, either as ${my_arg}, ${my arg} or ${myArg}.

*** Keywords ***
One Argument
    [Arguments]    ${arg_name}
    Log    Got argument ${arg_name}

Three Arguments
    [Arguments]    ${arg1}    ${arg2}    ${arg3}
    Log    1st argument: ${arg1}
    Log    2nd argument: ${arg2}
    Log    3rd argument: ${arg3}

Default values with user keywords

When creating user keywords, positional arguments are sufficient in most situations. It is, however, sometimes useful that keywords have default values for some or all of their arguments. Also user keywords support default values, and the needed new syntax does not add very much to the already discussed basic syntax.

In short, default values are added to arguments, so that first there is the equals sign (=) and then the value, for example ${arg}=default. There can be many arguments with defaults, but they all must be given after the normal positional arguments. The default value can contain a variable created on test, suite or global scope, but local variables of the keyword executor cannot be used. Default value can also be defined based on earlier arguments accepted by the keyword.

Note

The syntax for default values is space sensitive. Spaces before the = sign are not allowed, and possible spaces after it are considered part of the default value itself.

*** Keywords ***
One Argument With Default Value
    [Arguments]    ${arg}=default value
    [Documentation]    This keyword takes 0-1 arguments
    Log    Got argument ${arg}

Two Arguments With Defaults
    [Arguments]    ${arg1}=default 1    ${arg2}=${VARIABLE}
    [Documentation]    This keyword takes 0-2 arguments
    Log    1st argument ${arg1}
    Log    2nd argument ${arg2}

One Required And One With Default
    [Arguments]    ${required}    ${optional}=default
    [Documentation]    This keyword takes 1-2 arguments
    Log    Required: ${required}
    Log    Optional: ${optional}

 Default Based On Earlier Argument
    [Arguments]    ${a}    ${b}=${a}    ${c}=${a} and ${b}
    Should Be Equal    ${a}    ${b}
    Should Be Equal    ${c}    ${a} and ${b}

When a keyword accepts several arguments with default values and only some of them needs to be overridden, it is often handy to use the named arguments syntax. When this syntax is used with user keywords, the arguments are specified without the ${} decoration. For example, the second keyword above could be used like below and ${arg1} would still get its default value.

*** Test Cases ***
Example
    Two Arguments With Defaults    arg2=new value

As all Pythonistas must have already noticed, the syntax for specifying default arguments is heavily inspired by Python syntax for function default values.

Variable number of arguments with user keywords

Sometimes even default values are not enough and there is a need for a keyword accepting variable number of arguments. User keywords support also this feature. All that is needed is having list variable such as @{varargs} after possible positional arguments in the keyword signature. This syntax can be combined with the previously described default values, and at the end the list variable gets all the leftover arguments that do not match other arguments. The list variable can thus have any number of items, even zero.

*** Keywords ***
Any Number Of Arguments
    [Arguments]    @{varargs}
    Log Many    @{varargs}

One Or More Arguments
    [Arguments]    ${required}    @{rest}
    Log Many    ${required}    @{rest}

Required, Default, Varargs
    [Arguments]    ${req}    ${opt}=42    @{others}
    Log    Required: ${req}
    Log    Optional: ${opt}
    Log    Others:
    FOR    ${item}    IN    @{others}
        Log    ${item}
    END

Notice that if the last keyword above is used with more than one argument, the second argument ${opt} always gets the given value instead of the default value. This happens even if the given value is empty. The last example also illustrates how a variable number of arguments accepted by a user keyword can be used in a for loop. This combination of two rather advanced functions can sometimes be very useful.

The keywords in the examples above could be used, for example, like this:

*** Test Cases ***
Varargs with user keywords
    Any Number Of Arguments
    Any Number Of Arguments    arg
    Any Number Of Arguments    arg1    arg2    arg3   arg4
    One Or More Arguments    required
    One Or More Arguments    arg1    arg2    arg3   arg4
    Required, Default, Varargs    required
    Required, Default, Varargs    required    optional
    Required, Default, Varargs    arg1    arg2    arg3    arg4    arg5

Again, Pythonistas probably notice that the variable number of arguments syntax is very close to the one in Python.

Free named arguments with user keywords

User keywords can also accept free named arguments by having a dictionary variable like &{named} as the absolutely last argument. When the keyword is called, this variable will get all named arguments that do not match any positional argument or named-only argument in the keyword signature.

*** Keywords ***
Free Named Only
    [Arguments]    &{named}
    Log Many    &{named}

Positional And Free Named
    [Arguments]    ${required}    &{extra}
    Log Many    ${required}    &{extra}

Run Program
    [Arguments]    @{args}    &{config}
    Run Process    program.py    @{args}    &{config}

The last example above shows how to create a wrapper keyword that accepts any positional or named argument and passes them forward. See free named argument examples for a full example with same keyword.

Free named arguments support with user keywords works similarly as kwargs work in Python. In the signature and also when passing arguments forward, &{kwargs} is pretty much the same as Python's **kwargs.

Named-only arguments with user keywords

Starting from Robot Framework 3.1, user keywords support named-only arguments that are inspired by Python 3 keyword-only arguments. This syntax is typically used by having normal arguments after variable number of arguments (@{varargs}). If the keywords does not use varargs, it is possible to use just @{} to denote that the subsequent arguments are named-only:

*** Keywords ***
With Varargs
    [Arguments]    @{varargs}    ${named}
    Log Many    @{varargs}    ${named}

Without Varargs
    [Arguments]    @{}    ${first}    ${second}
    Log Many    ${first}    ${second}

Named-only arguments can be used together with positional arguments as well as with free named arguments. When using free named arguments, they must be last:

*** Keywords ***
With Positional
    [Arguments]    ${positional}    @{}    ${named}
    Log Many    ${positional}    ${named}

With Free Named
    [Arguments]    @{varargs}    ${named only}    &{free named}
    Log Many    @{varargs}    ${named only}    &{free named}

When passing named-only arguments to keywords, their order does not matter other than they must follow possible positional arguments. The keywords above could be used, for example, like this:

*** Test Cases ***
Example
    With Varargs    named=value
    With Varargs    positional    second positional    named=foobar
    Without Varargs    first=1    second=2
    Without Varargs    second=toka    first=eka
    With Positional    foo    named=bar
    With Positional    named=2    positional=1
    With Free Named    positional    named only=value    x=1    y=2
    With Free Named    foo=a    bar=b    named only=c    quux=d

Named-only arguments can have default values similarly as normal user keyword arguments. A minor difference is that the order of arguments with and without default values is not important.

*** Keywords ***
With Default
    [Arguments]    @{}    ${named}=default
    Log Many    ${named}

With And Without Defaults
    [Arguments]    @{}    ${optional}=default    ${mandatory}    ${mandatory 2}    ${optional 2}=default 2    ${mandatory 3}
    Log Many    ${optional}    ${mandatory}    ${mandatory 2}    ${optional 2}    ${mandatory 3}

2.7.5   Embedding arguments into keyword name

The previous section explained how to pass arguments to keywords so that they are listed separately after the keyword name. Robot Framework has also another approach to pass arguments, embedding them directly to the keyword name, used by the second test below:

*** Test Cases ***
Normal arguments
    Select from list    cat

Embedded arguments
    Select cat from list

As the example illustrates, embedding arguments to keyword names can make the data easier to read and understand even for people without any Robot Framework experience.

Basic syntax

The previous example showed how using a keyword Select cat from list is more fluent than using Select from list so that cat is passed to it as an argument. We obviously could implement Select cat from list as a normal keyword accepting no arguments, but then we needed to implement various other keywords like Select dog from list for other animals. Embedded arguments simplify this and we can instead implement just one keyword with name Select ${animal} from list and use it with any animal:

*** Test Cases ***
Embedded arguments
    Select cat from list
    Select dog from list

*** Keywords ***
Select ${animal} from list
    Open Page    Pet Selection
    Select Item From List    animal_list    ${animal}

As the above example shows, embedded arguments are specified simply by using variables in keyword names. The arguments used in the name are naturally available inside the keyword and they have different values depending on how the keyword is called. In the above example, ${animal} has value cat when the keyword is used for the first time and dog when it is used for the second time.

Starting from Robot Framework 6.1, it is possible to create user keywords that accept both embedded and "normal" arguments:

*** Test Cases ***
Embedded and normal arguments
    Number of cats should be    2
    Number of dogs should be    count=3

*** Keywords ***
Number of ${animals} should be
    [Arguments]    ${count}
    Open Page    Pet Selection
    Select Items From List    animal_list    ${animals}
    Number of Selected List Items Should Be    ${count}

Other than the special name, keywords with embedded arguments are created just like other user keywords. They are also used the same way as other keywords except that spaces and underscores are not ignored in their names when keywords are matched. They are, however, case-insensitive like other keywords. For example, the Select ${animal} from list keyword could be used like select cow from list, but not like Select cow fromlist.

Embedded arguments do not support default values or variable number of arguments like normal arguments do. If such functionality is needed, normal arguments should be used instead. Passing embedded arguments as variables is possible, but that can reduce readability:

*** Variables ***
${SELECT}        cat

*** Test Cases ***
Embedded arguments with variable
    Select ${SELECT} from list

*** Keywords ***
Select ${animal} from list
    Open Page    Pet Selection
    Select Item From List    animal_list    ${animal}

Embedded arguments matching wrong values

One tricky part in using embedded arguments is making sure that the values used when calling the keyword match the correct arguments. This is a problem especially if there are multiple arguments and characters separating them may also appear in the given values. For example, Select Los Angeles Lakers in the following example matches Select ${city} ${team} so that ${city} contains Los and ${team} contains Angeles Lakers:

*** Test Cases ***
Example
    Select Chicago Bulls
    Select Los Angeles Lakers

*** Keywords ***
Select ${city} ${team}
    Log    Selected ${team} from ${city}.

An easy solution to this problem is surrounding arguments with double quotes or other characters not used in the actual values. This fixed example works so that cities and teams match correctly:

*** Test Cases ***
Example
    Select "Chicago" "Bulls"
    Select "Los Angeles" "Lakers"

*** Keywords ***
Select "${city}" "${team}"
    Log    Selected ${team} from ${city}.

This approach is not enough to resolve all conflicts, but it helps in common cases and is generally recommended. Another benefit is that it makes arguments stand out from rest of the keyword.

Prior to Robot Framework 7.1, embedded arguments starting the keyword name also matched possible given/when/then/and/but prefixes typically used in Behavior Driven Development (BDD). For example, ${name} goes home matched Given Janne goes home so that ${name} got value Given Janne. Nowadays the prefix is ignored and ${name} will be Janne as expected. If older Robot Framework versions need to be supported, it is easiest to quote the argument like in "${name}" goes home to get consistent behavior.

An alternative solution for limiting what values arguments match is using custom regular expressions.

Resolving conflicts

When using embedded arguments, it is pretty common that there are multiple keyword implementations that match the keyword that is used. For example, Execute "ls" with "lf" in the example below matches both of the keywords. It matching Execute "${cmd}" with "${opts}" is pretty obvious and what we want, but it also matches Execute "${cmd}" so that ${cmd} matches ls" with "-lh.

*** Settings ***
Library          Process

*** Test Cases ***
Automatic conflict resolution
    Execute "ls"
    Execute "ls" with "-lh"

*** Keywords ***
Execute "${cmd}"
    Run Process    ${cmd}    shell=True

Execute "${cmd}" with "${opts}"
    Run Process    ${cmd} ${opts}    shell=True

When this kind of conflicts occur, Robot Framework tries to automatically select the best match and use that. In the above example, Execute "${cmd}" with "${opts}" is considered a better match than the more generic Execute "${cmd}" and running the example thus succeeds without conflicts.

It is not always possible to find a single match that is better than others. For example, the second test below fails because Robot Framework matches both of the keywords equally well. This kind of conflicts need to be resolved manually either by renaming keywords or by using custom regular expressions.

*** Test Cases ***
No conflict
    Automation framework
    Robot uprising

Unresolvable conflict
    Robot Framework

*** Keywords ***
${type} Framework
    Should Be Equal    ${type}    Automation

Robot ${action}
    Should Be Equal    ${action}    uprising

Keywords that accept only "normal" arguments or no arguments at all are considered to match better than keywords accepting embedded arguments. For example, if the following keyword is added to the above example, Robot Framework used by the latter test matches it and the test succeeds:

*** Keywords ***
Robot Framework
    No Operation

Before looking which match is best, Robot Framework checks are some of the matching keywords implemented in the same file as the caller keyword. If there are such keywords, they are given precedence over other keywords. Alternatively, library search order can be used to control the order in which Robot Framework looks for keywords in resources and libraries.

Note

Automatically resolving conflicts if multiple keywords with embedded arguments match is a new feature in Robot Framework 6.0. With older versions custom regular expressions explained below can be used instead.

Using custom regular expressions

When keywords with embedded arguments are called, the values are matched internally using regular expressions (regexps for short). The default logic goes so that every argument in the name is replaced with a pattern .*? that matches any string and tries to match as little as possible. This logic works fairly well normally, but as discussed above, sometimes keywords match wrong values and sometimes there are conflicts that cannot be resolved . A solution in these cases is specifying a custom regular expression that makes sure that the keyword matches only what it should in that particular context. To be able to use this feature, and to fully understand the examples in this section, you need to understand at least the basics of the regular expression syntax.

A custom embedded argument regular expression is defined after the base name of the argument so that the argument and the regexp are separated with a colon. For example, an argument that should match only numbers can be defined like ${arg:\d+}.

Using custom regular expressions is illustrated by the following examples. Notice that the first one shows how the earlier problem with Select ${city} ${team} not matching Select Los Angeles Lakers properly can be resolved without quoting. That is achieved by implementing the keyword so that ${team} can only contain non-whitespace characters.

*** Settings ***
Library          DateTime

*** Test Cases ***
Do not match whitespace characters
    Select Chicago Bulls
    Select Los Angeles Lakers

Match numbers and characters from set
    1 + 2 = 3
    53 - 11 = 42

Match either date or literal 'today'
    Deadline is 2022-09-21
    Deadline is today

*** Keywords ***
Select ${city} ${team:\S+}
    Log    Selected ${team} from ${city}.

${number1:\d+} ${operator:[+-]} ${number2:\d+} = ${expected:\d+}
    ${result} =    Evaluate    ${number1} ${operator} ${number2}
    Should Be Equal As Integers    ${result}    ${expected}

Deadline is ${date:(\d{4}-\d{2}-\d{2}|today)}
    IF    '${date}' == 'today'
        ${date} =    Get Current Date
    ELSE
        ${date} =    Convert Date    ${date}
    END
    Log    Deadline is on ${date}.
Supported regular expression syntax

Being implemented with Python, Robot Framework naturally uses Python's re module that has pretty standard regular expressions syntax. This syntax is otherwise fully supported with embedded arguments, but regexp extensions in format (?...) cannot be used. If the regular expression syntax is invalid, creating the keyword fails with an error visible in test execution errors.

Escaping special characters

Regular expressions use the backslash character (\) heavily both to form special sequences (e.g. \d) and to escape characters that have a special meaning in regexps (e.g. \$). Typically in Robot Framework data backslash characters need to be escaped with another backslash, but that is not required in this context. If there is a need to have a literal backslash in the pattern, then the backslash must be escaped like ${path:c:\\temp\\.*}.

Possible lone opening and closing curly braces in the pattern must be escaped like ${open:\{} and ${close:\}} or otherwise Robot Framework is not able to parse the variable syntax correctly. If there are matching braces like in ${digits:\d{2}}, escaping is not needed.

Note

Prior to Robot Framework 3.2, it was mandatory to escape all closing curly braces in the pattern like ${digits:\d{2\}}. This syntax is unfortunately not supported by Robot Framework 3.2 or newer and keywords using it must be updated when upgrading.

Note

Prior to Robot Framework 6.0, using literal backslashes in the pattern required double escaping them like ${path:c:\\\\temp\\\\.*}. Patterns using literal backslashes need to be updated when upgrading.

Using variables with custom embedded argument regular expressions

When embedded arguments are used with custom regular expressions, Robot Framework automatically enhances the specified regexps so that they match variables in addition to the text matching the pattern. For example, the following test case would pass using the keywords from the earlier example.

*** Variables ***
${DATE}    2011-06-27

*** Test Cases ***
Example
    Deadline is ${DATE}
    ${1} + ${2} = ${3}

A limitation of using variables is that their actual values are not matched against custom regular expressions. As the result keywords may be called with values that their custom regexps would not allow. This behavior is deprecated starting from Robot Framework 6.0 and values will be validated in the future. For more information see issue #4462.

Behavior-driven development example

A big benefit of having arguments as part of the keyword name is that it makes it easier to use higher-level sentence-like keywords when using the behavior-driven style to write tests. As the example below shows, this support is typically used in combination with the possibility to omit Given, When and Then prefixes in keyword definitions:

*** Test Cases ***
Add two numbers
    Given I have Calculator open
    When I add 2 and 40
    Then result should be 42

Add negative numbers
    Given I have Calculator open
    When I add 1 and -2
    Then result should be -1

*** Keywords ***
I have ${program} open
    Start Program    ${program}

I add ${number 1} and ${number 2}
    Input Number    ${number 1}
    Push Button     +
    Input Number    ${number 2}
    Push Button     =

Result should be ${expected}
    ${result} =    Get Result
    Should Be Equal    ${result}    ${expected}

Note

Embedded arguments feature in Robot Framework is inspired by how step definitions are created in the popular BDD tool Cucumber.

2.7.6   User keyword return values

Similarly as library keywords, also user keywords can return values. When using Robot Framework 5.0 or newer, the recommended approach is using the native RETURN statement. The old [Return] setting was deprecated in Robot Framework 7.0 and also BuiltIn keywords Return From Keyword and Return From Keyword If are considered deprecated.

Regardless how values are returned, they can be assigned to variables in test cases and in other user keywords.

Using RETURN statement

The recommended approach to return values is using the RETURN statement. It accepts optional return values and can be used with IF and inline IF structures. Its usage is easiest explained with examples:

*** Keywords ***
Return One Value
    [Arguments]    ${arg}
    [Documentation]    Return a value unconditionally.
    ...                Notice that keywords after RETURN are not executed.
    ${value} =    Convert To Upper Case    ${arg}
    RETURN    ${value}
    Fail    Not executed

Return Three Values
    [Documentation]    Return multiple values.
    RETURN    a    b    c

Conditional Return
    [Arguments]    ${arg}
    [Documentation]    Return conditionally.
    Log    Before
    IF    ${arg} == 1
        Log    Returning!
        RETURN
    END
    Log    After

Find Index
    [Arguments]    ${test}    ${items}
    [Documentation]    Advanced example involving FOR loop, inline IF and @{list} variable syntax.
    FOR    ${index}    ${item}    IN ENUMERATE    @{items}
        IF    $item == $test    RETURN    ${index}
    END
    RETURN    ${-1}

If you want to test the above examples yourself, you can use them with these test cases:

*** Settings ***
Library           String

*** Test Cases ***
One return value
    ${ret} =    Return One Value    argument
    Should Be Equal    ${ret}    ARGUMENT

Multiple return values
    ${a}    ${b}    ${c} =    Return Three Values
    Should Be Equal    ${a}, ${b}, ${c}    a, b, c

Conditional return
    Conditional Return    1
    Conditional Return    2

Advanced
    @{list} =    Create List    foo    bar    baz
    ${index} =    Find Index    bar    ${list}
    Should Be Equal    ${index}    ${1}
    ${index} =    Find Index    non existing    ${list}
    Should Be Equal    ${index}    ${-1}

Note

RETURN syntax is case-sensitive similarly as IF and FOR.

Note

RETURN is new in Robot Framework 5.0. Use approaches explained below if you need to support older versions.

Using [Return] setting

The [Return] setting defines what the keyword should return after it has been executed. Although it is recommended to have it at the end of keyword where it logically belongs, its position does not affect how it is used.

An inherent limitation of the [Return] setting is that cannot be used conditionally. Thus only the first two earlier RETURN statement examples can be created using it.

*** Keywords ***
Return One Value
    [Arguments]    ${arg}
    ${value} =    Convert To Upper Case    ${arg}
    [Return]    ${value}

Return Three Values
    [Return]    a    b    c

Note

The [Return] setting was deprecated in Robot Framework 7.0 and the RETURN statement should be used instead. If there is a need to support older Robot Framework versions that do not support RETURN, it is possible to use the special keywords discussed in the next section.

Using special keywords to return

BuiltIn keywords Return From Keyword and Return From Keyword If allow returning from a user keyword conditionally in the middle of the keyword. Both of them also accept optional return values that are handled exactly like with the RETURN statement and the [Return] setting discussed above.

The introduction of the RETURN statement makes these keywords redundant. Examples below contain same keywords as earlier RETURN examples but these ones are more verbose:

*** Keywords ***
Return One Value
    [Arguments]    ${arg}
    ${value} =    Convert To Upper Case    ${arg}
    Return From Keyword    ${value}
    Fail    Not executed

Return Three Values
    Return From Keyword        a    b    c

Conditional Return
    [Arguments]    ${arg}
    Log    Before
    IF    ${arg} == 1
        Log    Returning!
        Return From Keyword
    END
    Log    After

Find Index
    [Arguments]    ${test}    ${items}
    FOR    ${index}    ${item}    IN ENUMERATE    @{items}
        Return From Keyword If    $item == $test    ${index}
    END
    Return From Keyword    ${-1}

Note

These keywords are effectively deprecated and the RETURN statement should be used unless there is a need to support also older versions than Robot Framework 5.0. There is no visible deprecation warning when using these keywords yet, but they will be loudly deprecated and eventually removed in the future.

2.7.7   User keyword setup and teardown

A user keyword can have a setup and a teardown similarly as tests. They are specified using [Setup] and [Teardown] settings, respectively, directly to the keyword having them. Unlike with tests, it is not possible to specify a common setup or teardown to all keywords in a certain file.

A setup and a teardown are always a single keyword, but they can themselves be user keywords executing multiple keywords internally. It is possible to specify them as variables, and using a special NONE value (case-insensitive) is the same as not having a setup or a teardown at all.

User keyword setup is not much different to the first keyword inside the created user keyword. The only functional difference is that a setup can be specified as a variable, but it can also be useful to be able to explicitly mark a keyword to be a setup.

User keyword teardowns are, exactly as test teardowns, executed also if the user keyword fails. They are thus very useful when needing to do something at the end of the keyword regardless of its status. To ensure that all cleanup activities are done, the continue on failure mode is enabled by default with user keyword teardowns the same way as with test teardowns.

*** Keywords ***
Setup and teardown
    [Setup]       Log    New in RF 7!
    Do Something
    [Teardown]    Log    Old feature.

Using variables
    [Setup]       ${SETUP}
    Do Something
    [Teardown]    ${TEARDOWN}

Note

User keyword setups are new in Robot Framework 7.0.

2.7.8   Private user keywords

User keywords can be tagged with a special robot:private tag to indicate that they should only be used in the file where they are created:

*** Keywords ***
Public Keyword
    Private Keyword

Private Keyword
    [Tags]    robot:private
    No Operation

Using the robot:private tag does not outright prevent using the keyword outside the file where it is created, but such usages will cause a warning. If there is both a public and a private keyword with the same name, the public one will be used but also this situation causes a warning.

Private keywords are included in spec files created by Libdoc but not in its HTML output files.

Note

Private user keywords are new in Robot Framework 6.0.

2.8   Resource and variable files

User keywords and variables in suite files and suite initialization files can only be used in files where they are created, but resource files provide a mechanism for sharing them. The high level syntax for creating resource files is exactly the same as when creating suite files and supported file formats are the same as well. The main difference is that resource files cannot have tests.

Variable files provide a powerful mechanism for creating and sharing variables. For example, they allow values other than strings and enable creating variables dynamically. Their flexibility comes from the fact that they are created using Python or YAML, which also makes them somewhat more complicated than Variable sections.

2.8.1   Resource files

Resource files are typically created using the plain text format, but also reStructuredText format and JSON format are supported.

Taking resource files into use

Resource files are imported using the Resource setting in the Settings section so that the path to the resource file is given as an argument to the setting. The recommended extension for resource files is .resource. For backwards compatibility reasons also .robot, .txt and .tsv work, but using .resource may be mandated in the future.

If the resource file path is absolute, it is used directly. Otherwise, the resource file is first searched relatively to the directory where the importing file is located. If the file is not found there, it is then searched from the directories in Python's module search path. Searching resource files from the module search path makes it possible to bundle them into Python packages as package data and importing them like package/example.resource.

The resource file path can contain variables, and it is recommended to use them to make paths system-independent (for example, ${RESOURCES}/login.resource or just ${RESOURCE_PATH}). Additionally, forward slashes (/) in the path are automatically changed to backslashes (\) on Windows.

*** Settings ***
Resource    example.resource
Resource    ../resources/login.resource
Resource    package/example.resource
Resource    ${RESOURCES}/common.resource

The user keywords and variables defined in a resource file are available in the file that takes that resource file into use. Similarly available are also all keywords and variables from the libraries, resource files and variable files imported by the said resource file.

Note

The .resource extension is new in Robot Framework 3.1.

Resource file structure

The higher-level structure of resource files is the same as that of suite files otherwise, but they cannot contain tests or tasks. Additionally, the Setting section in resource files can contain only imports (Library, Resource, Variables), Documentation and Keyword Tags. The Variable section and Keyword section are used exactly the same way as in suite files.

If several resource files have a user keyword with the same name, they must be used so that the keyword name is prefixed with the resource file name without the extension (for example, myresources.Some Keyword and common.Some Keyword). Moreover, if several resource files contain the same variable, the one that is imported first is taken into use.

Documenting resource files

Keywords created in a resource file can be documented using [Documentation] setting. The resource file itself can have Documentation in the Setting section similarly as suites.

Libdoc and various editors use these documentations, and they are naturally available for anyone opening resource files. The first logical line of the documentation of a keyword, until the first empty line, is logged when the keyword is run, but otherwise resource file documentation is ignored during the test execution.

Example resource file

*** Settings ***
Documentation     An example resource file
Library           SeleniumLibrary
Resource          ${RESOURCES}/common.resource

*** Variables ***
${HOST}           localhost:7272
${LOGIN URL}      http://${HOST}/
${WELCOME URL}    http://${HOST}/welcome.html
${BROWSER}        Firefox

*** Keywords ***
Open Login Page
    [Documentation]    Opens browser to login page
    Open Browser    ${LOGIN URL}    ${BROWSER}
    Title Should Be    Login Page

Input Name
    [Arguments]    ${name}
    Input Text    username_field    ${name}

Input Password
    [Arguments]    ${password}
    Input Text    password_field    ${password}

Resource files using reStructured text format

The reStructuredText format that can be used with suite files works also with resource files. Such resource files can use either .rst or .rest extension and they are otherwise imported exactly as normal resource files:

*** Settings ***
Resource         example.rst

When parsing resource files using the reStructuredText format, Robot Framework ignores all data outside code blocks containing Robot Framework data exactly the same way as when parsing reStructuredText suite files. For example, the following resource file imports OperatingSystem library, defines ${MESSAGE} variable and creates My Keyword keyword:

Resource file using reStructuredText
------------------------------------

This text is outside code blocks and thus ignored.

.. code:: robotframework

   *** Settings ***
   Library          OperatingSystem

   *** Variables ***
   ${MESSAGE}       Hello, world!

Also this text is outside code blocks and ignored. Code blocks not
containing Robot Framework data are ignored as well.

.. code:: robotframework

   # Both space and pipe separated formats are supported.

   | *** Keywords ***  |                        |         |
   | My Keyword        | [Arguments]            | ${path} |
   |                   | Directory Should Exist | ${path} |

Resource files using JSON format

Resource files can be created using JSON the same way as suite files. Such JSON resource files must use either the standard .json extension or the custom .rsrc extension. They are otherwise imported exactly as normal resource files:

*** Settings ***
Resource         example.rsrc

Resource files can be converted to JSON using ResourceFile.to_json and recreated using ResourceFile.from_json:

from robot.running import ResourceFile


# Create resource file based on data on the file system.
resource = ResourceFile.from_file_system('example.resource')

# Save JSON data to a file.
resource.to_json('example.rsrc')

# Recreate resource from JSON data.
resource = ResourceFile.from_json('example.rsrc')

2.8.2   Variable files

Variable files contain variables that can be used in the test data. Variables can also be created using Variable sections or set from the command line, but variable files allow creating them dynamically and also make it easy to create other variable values than strings.

Variable files are typically implemented as modules and there are two different approaches for creating variables:

Getting variables directly from a module
Variables are specified as module attributes. In simple cases, the syntax is so simple that no real programming is needed. For example, MY_VAR = 'my value' creates a variable ${MY_VAR} with the specified text as its value. One limitation of this approach is that it does not allow using arguments.
Getting variables from a special function
Variable files can have a special get_variables (or getVariables) method that returns variables as a mapping. Because the method can take arguments this approach is very flexible.

Alternatively variable files can be implemented as classes that the framework will instantiate. Also in this case it is possible to create variables as attributes or get them dynamically from the get_variables method. Variable files can also be created as YAML and JSON.

Taking variable files into use

Setting section

All test data files can import variable files using the Variables setting in the Setting section. Variable files are typically imported using a path to the file same way as resource files are imported using the Resource setting. Similarly to resource files, the path to the imported variable file is considered relative to the directory where the importing file is, and if not found, it is searched from directories in the module search path. The path can also contain variables, and slashes are converted to backslashes on Windows.

Examples:

*** Settings ***
Variables    myvariables.py
Variables    ../data/variables.py
Variables    ${RESOURCES}/common.yaml

Starting from Robot Framework 5.0, variable files implemented using Python can also be imported using the module name similarly as libraries. When using this approach, the module needs to be in the module search path.

Examples:

*** Settings ***
Variables    myvariables
Variables    rootmodule.Variables

If a variable file accepts arguments, they are specified after the path or name of the variable file to import:

*** Settings ***
Variables    arguments.py    arg1    ${ARG2}
Variables    arguments    argument

All variables from a variable file are available in the test data file that imports it. If several variable files are imported and they contain a variable with the same name, the one in the earliest imported file is taken into use. Additionally, variables created in Variable sections and set from the command line override variables from variable files.

Command line

Another way to take variable files into use is using the command line option --variablefile. Variable files are referenced using a path or module name similarly as when importing them using the Variables setting. Possible arguments are joined to the path with a colon (:):

--variablefile myvariables.py
--variablefile path/variables.py
--variablefile /absolute/path/common.py
--variablefile variablemodule
--variablefile arguments.py:arg1:arg2
--variablefile rootmodule.Variables:arg1:arg2

Variable files taken into use from the command line are also searched from the module search path similarly as variable files imported in the Setting section. Relative paths are considered relative to the directory where execution is started from.

If a variable file is given as an absolute Windows path, the colon after the drive letter is not considered a separator:

--variablefile C:\path\variables.py

It is also possible to use a semicolon (;) as an argument separator. This is useful if variable file arguments themselves contain colons, but requires surrounding the whole value with quotes on UNIX-like operating systems:

--variablefile C:\path\variables.py;D:\data.xls
--variablefile "myvariables.py;argument:with:colons"

Variables in variable files taken use on the command line are globally available in all test data files, similarly as individual variables set with the --variable option. If both --variablefile and --variable options are used and there are variables with same names, those that are set individually with --variable option take precedence.

Getting variables directly from a module

Basic syntax

When variable files are taken into use, they are imported as Python modules and all their module level attributes that do not start with an underscore (_) are, by default, considered to be variables. Because variable names are case-insensitive, both lower- and upper-case names are possible, but in general, capital letters are recommended for global variables and attributes.

VARIABLE = "An example string"
ANOTHER_VARIABLE = "This is pretty easy!"
INTEGER = 42
STRINGS = ["one", "two", "kolme", "four"]
NUMBERS = [1, INTEGER, 3.14]
MAPPING = {"one": 1, "two": 2, "three": 3}

In the example above, variables ${VARIABLE}, ${ANOTHER VARIABLE}, and so on, are created. The first two variables are strings, the third one is an integer, then there are two lists, and the final value is a dictionary. All these variables can be used as a scalar variable, lists and the dictionary also a list variable like @{STRINGS} (in the dictionary's case that variable would only contain keys), and the dictionary also as a dictionary variable like &{MAPPING}.

To make creating a list variable or a dictionary variable more explicit, it is possible to prefix the variable name with LIST__ or DICT__, respectively:

from collections import OrderedDict

LIST__ANIMALS = ["cat", "dog"]
DICT__FINNISH = OrderedDict([("cat", "kissa"), ("dog", "koira")])

These prefixes will not be part of the final variable name, but they cause Robot Framework to validate that the value actually is list-like or dictionary-like. With dictionaries the actual stored value is also turned into a special dictionary that is used also when creating dictionary variables in the Variable section. Values of these dictionaries are accessible as attributes like ${FINNISH.cat}. These dictionaries are also ordered, but preserving the source order requires also the original dictionary to be ordered.

The variables in both the examples above could be created also using the Variable section below.

*** Variables ***
${VARIABLE}            An example string
${ANOTHER VARIABLE}    This is pretty easy!
${INTEGER}             ${42}
@{STRINGS}             one          two           kolme         four
@{NUMBERS}             ${1}         ${INTEGER}    ${3.14}
&{MAPPING}             one=${1}     two=${2}      three=${3}
@{ANIMALS}             cat          dog
&{FINNISH}             cat=kissa    dog=koira

Note

Variables are not replaced in strings got from variable files. For example, VAR = "an ${example}" would create variable ${VAR} with a literal string value an ${example} regardless would variable ${example} exist or not.

Using objects as values

Variables in variable files are not limited to having only strings or other base types as values like Variable sections. Instead, their variables can contain any objects. In the example below, the variable ${MAPPING} contains a Python dictionary and also has two variables created from a custom object implemented in the same file.

MAPPING = {'one': 1, 'two': 2}

class MyObject:
    def __init__(self, name):
        self.name = name

OBJ1 = MyObject('John')
OBJ2 = MyObject('Jane')
Creating variables dynamically

Because variable files are created using a real programming language, they can have dynamic logic for setting variables.

import os
import random
import time

USER = os.getlogin()                # current login name
RANDOM_INT = random.randint(0, 10)  # random integer in range [0,10]
CURRENT_TIME = time.asctime()       # timestamp like 'Thu Apr  6 12:45:21 2006'
if time.localtime()[3] > 12:
    AFTERNOON = True
else:
    AFTERNOON = False

The example above uses standard Python libraries to set different variables, but you can use your own code to construct the values. The example below illustrates the concept, but similarly, your code could read the data from a database, from an external file or even ask it from the user.

import math

def get_area(diameter):
    radius = diameter / 2
    area = math.pi * radius * radius
    return area

AREA1 = get_area(1)
AREA2 = get_area(2)
Selecting which variables to include

When Robot Framework processes variable files, all their attributes that do not start with an underscore are expected to be variables. This means that even functions or classes created in the variable file or imported from elsewhere are considered variables. For example, the last example would contain the variables ${math} and ${get_area} in addition to ${AREA1} and ${AREA2}.

Normally the extra variables do not cause problems, but they could override some other variables and cause hard-to-debug errors. One possibility to ignore other attributes is prefixing them with an underscore:

import math as _math

def _get_area(diameter):
    radius = diameter / 2.0
    area = _math.pi * radius * radius
    return area

AREA1 = _get_area(1)
AREA2 = _get_area(2)

If there is a large number of other attributes, instead of prefixing them all, it is often easier to use a special attribute __all__ and give it a list of attribute names to be processed as variables.

import math

__all__ = ['AREA1', 'AREA2']

def get_area(diameter):
    radius = diameter / 2.0
    area = math.pi * radius * radius
    return area

AREA1 = get_area(1)
AREA2 = get_area(2)

Note

The __all__ attribute is also, and originally, used by Python to decide which attributes to import when using the syntax from modulename import *.

The third option to select what variables are actually created is using a special get_variables function discussed below.

Getting variables from a special function

An alternative approach for getting variables is having a special get_variables function (also camelCase syntax getVariables is possible) in a variable file. If such a function exists, Robot Framework calls it and expects to receive variables as a Python dictionary with variable names as keys and variable values as values. Created variables can be used as scalars, lists, and dictionaries exactly like when getting variables directly from a module, and it is possible to use LIST__ and DICT__ prefixes to make creating list and dictionary variables more explicit. The example below is functionally identical to the first example related to getting variables directly from a module.

def get_variables():
    variables = {"VARIABLE ": "An example string",
                 "ANOTHER VARIABLE": "This is pretty easy!",
                 "INTEGER": 42,
                 "STRINGS": ["one", "two", "kolme", "four"],
                 "NUMBERS": [1, 42, 3.14],
                 "MAPPING": {"one": 1, "two": 2, "three": 3}}
    return variables

get_variables can also take arguments, which facilitates changing what variables actually are created. Arguments to the function are set just as any other arguments for a Python function. When taking variable files into use, arguments are specified after the path to the variable file, and in the command line they are separated from the path with a colon or a semicolon.

The dummy example below shows how to use arguments with variable files. In a more realistic example, the argument could be a path to an external text file or database where to read variables from.

variables1 = {'scalar': 'Scalar variable',
              'LIST__list': ['List','variable']}
variables2 = {'scalar' : 'Some other value',
              'LIST__list': ['Some','other','value'],
              'extra': 'variables1 does not have this at all'}

def get_variables(arg):
    if arg == 'one':
        return variables1
    else:
        return variables2

Starting from Robot Framework 7.0, arguments to variable files support automatic argument conversion as well as named argument syntax. For example, a variable file with get_variables(first: int = 0, second: str = '') could be imported like this:

*** Settings ***
Variables    example.py    42              # Converted to integer.
Variables    example.py    second=value    # Named argument syntax.

Implementing variable file as a class

It is possible to implement variables files also as a class.

Implementation

Because variable files are always imported using a file system path, the class must have the same name as the module it is located in.

The framework will create an instance of the class using no arguments and variables will be gotten from the instance. Similarly as with modules, variables can be defined as attributes directly in the instance or gotten from a special get_variables method.

When variables are defined directly in an instance, all attributes containing callable values are ignored to avoid creating variables from possible methods the instance has. If you would actually need callable variables, you need to use other approaches to create variable files.

Examples

The first examples create variables from attributes. It creates variables ${VARIABLE} and @{LIST} from class attributes and ${ANOTHER VARIABLE} from an instance attribute.

class StaticExample:
    variable = 'value'
    LIST__list = [1, 2, 3]
    _not_variable = 'starts with an underscore'

    def __init__(self):
        self.another_variable = 'another value'

The second examples utilizes dynamic approach for getting variables. It creates only one variable ${DYNAMIC VARIABLE}.

class DynamicExample:

    def get_variables(self, *args):
        return {'dynamic variable': ' '.join(args)}

Variable file as YAML

Variable files can also be implemented as YAML files. YAML is a data serialization language with a simple and human-friendly syntax that is nevertheless easy for machines to parse. The following example demonstrates a simple YAML file:

string:   Hello, world!
integer:  42
list:
  - one
  - two
dict:
  one: yksi
  two: kaksi
  with spaces: kolme

YAML variable files can be used exactly like normal variable files from the command line using --variablefile option, in the Settings section using Variables setting, and dynamically using the Import Variables keyword. They are automatically recognized by their extension that must be either .yaml or .yml. If the above YAML file is imported, it will create exactly the same variables as this Variable section:

*** Variables ***
${STRING}     Hello, world!
${INTEGER}    ${42}
@{LIST}       one         two
&{DICT}       one=yksi    two=kaksi    with spaces=kolme

YAML files used as variable files must always be mappings on the top level. As the above example demonstrates, keys and values in the mapping become variable names and values, respectively. Variable values can be any data types supported by YAML syntax. If names or values contain non-ASCII characters, YAML variables files must be UTF-8 encoded.

Mappings used as values are automatically converted to special dictionaries that are used also when creating dictionary variables in the Variable section. Most importantly, values of these dictionaries are accessible as attributes like ${DICT.one}, assuming their names are valid as Python attribute names. If the name contains spaces or is otherwise not a valid attribute name, it is always possible to access dictionary values using syntax like ${DICT}[with spaces] syntax.

Note

Using YAML files with Robot Framework requires PyYAML module to be installed. You can typically install it with pip like pip install pyyaml.

Variable file as JSON

Variable files can also be implemented as JSON files. Similarly as YAML discussed in the previous section, JSON is a data serialization format targeted both for humans and machines. It is based on JavaScript syntax and it is not as human-friendly as YAML, but it still relatively easy to understand and modify. The following example contains exactly the same data as the earlier YAML example:

{
    "string": "Hello, world!",
    "integer": 42,
    "list": [
        "one",
        "two"
    ],
    "dict": {
        "one": "yksi",
        "two": "kaksi",
        "with spaces": "kolme"
    }
}

JSON variable files are automatically recognized by their .json extension and they can be used exactly like YAML variable files. They also have exactly same requirements for structure, encoding, and so on. Unlike YAML, Python supports JSON out-of-the-box so no extra modules need to be installed.

Note

Support for JSON variable files is new in Robot Framework 6.1.

2.9   Control structures

This section describes various structures that can be used to control the test execution flow. These structures are familiar from most programming languages and they allow conditional execution, repeatedly executing a block of keywords and fine-grained error handling. For readability reasons these structures should be used judiciously, and more complex use cases should be preferably implemented in test libraries.

2.9.1   FOR loops

Repeating same actions several times is quite a common need in test automation. With Robot Framework, test libraries can have any kind of loop constructs, and most of the time loops should be implemented in them. Robot Framework also has its own FOR loop syntax, which is useful, for example, when there is a need to repeat keywords from different libraries.

FOR loops can be used with both test cases and user keywords. Except for really simple cases, user keywords are better, because they hide the complexity introduced by FOR loops. The basic FOR loop syntax, FOR item IN sequence, is derived from Python, but similar syntax is supported also by various other programming languages.

Simple FOR loop

In a normal FOR loop, one variable is assigned based on a list of values, one value per iteration. The syntax starts with FOR (case-sensitive) as a marker, then the loop variable, then a mandatory IN (case-sensitive) as a separator, and finally the values to iterate. These values can contain variables, including list variables.

The keywords used in the FOR loop are on the following rows and the loop ends with END (case-sensitive) on its own row. Keywords inside the loop do not need to be indented, but that is highly recommended to make the syntax easier to read.

*** Test Cases ***
Example
    FOR    ${animal}    IN    cat    dog
        Log    ${animal}
        Log    2nd keyword
    END
    Log    Outside loop

Second Example
    FOR    ${var}    IN    one    two    ${3}    four    ${five}
    ...    kuusi    7    eight    nine    ${last}
        Log    ${var}
    END

The FOR loop in Example above is executed twice, so that first the loop variable ${animal} has the value cat and then dog. The loop consists of two Log keywords. In the second example, loop values are split into two rows and the loop is run altogether ten times.

It is often convenient to use FOR loops with list variables. This is illustrated by the example below, where @{ELEMENTS} contains an arbitrarily long list of elements and keyword Start Element is used with all of them one by one.

*** Test Cases ***
Example
    FOR    ${element}    IN    @{ELEMENTS}
        Start Element    ${element}
    END

Old FOR loop syntax

Prior to Robot Framework 3.1, the FOR loop syntax was different than nowadays. The marker to start the loop was :FOR instead of FOR and loop contents needed to be explicitly marked with a backslash instead of using the END marker to end the loop. The first example above would look like this using the old syntax:

*** Test Cases ***
Example
    :FOR    ${animal}    IN    cat    dog
    \    Log    ${animal}
    \    Log    2nd keyword
    Log    Outside loop

The old syntax was deprecated in Robot Framework 3.2 and the support for it was removed altogether in Robot Framework 4.0.

Nesting FOR loops

Starting from Robot Framework 4.0, it is possible to use nested FOR loops simply by adding a loop inside another loop:

*** Keywords ***
Handle Table
    [Arguments]    @{table}
    FOR    ${row}    IN    @{table}
        FOR    ${cell}    IN    @{row}
            Handle Cell    ${cell}
        END
    END

There can be multiple nesting levels and loops can also be combined with other control structures:

*** Test Cases ***
Multiple nesting levels
    FOR    ${root}    IN    r1    r2
        FOR    ${child}    IN    c1   c2    c3
            FOR    ${grandchild}    IN    g1    g2
                Log Many    ${root}    ${child}    ${grandchild}
            END
        END
        FOR    ${sibling}    IN    s1    s2    s3
            IF    '${sibling}' != 's2'
                Log Many    ${root}    ${sibling}
            END
        END
    END

Using several loop variables

It is possible to iterate over multiple values in one iteration by using multiple loop variables between the FOR and IN markers. There can be any number of loop variables, but the number of values must be evenly dividable by the number of variables. Each iteration consumes as many values as there are variables.

If there are lot of values to iterate, it is often convenient to organize them below the loop variables, as in the first loop of the example below:

*** Test Cases ***
Multiple loop variables
    FOR    ${index}    ${english}    ${finnish}    IN
    ...    1           cat           kissa
    ...    2           dog           koira
    ...    3           horse         hevonen
        Add Translation    ${english}    ${finnish}    ${index}
    END
    FOR    ${name}    ${id}    IN    @{EMPLOYERS}
        Create    ${name}    ${id}
    END

FOR-IN-RANGE loop

All FOR loops in the previous section iterated over a sequence. That is the most common use case, but sometimes it is convenient to have a loop that is executed a certain number of times. For this purpose Robot Framework has a special FOR index IN RANGE limit loop syntax that is derived from the similar Python idiom using the built-in range() function.

Similarly as other FOR loops, the FOR-IN-RANGE loop starts with FOR that is followed by a loop variable. In this format there can be only one loop variable and it contains the current loop index. After the variable there must be IN RANGE marker (case-sensitive) that is followed by loop limits.

In the simplest case, only the upper limit of the loop is specified. In this case, loop indices start from zero and increase by one until, but excluding, the limit. It is also possible to give both the start and end limits. Then indices start from the start limit, but increase similarly as in the simple case. Finally, it is possible to give also the step value that specifies the increment to use. If the step is negative, it is used as decrement.

It is possible to use simple arithmetic such as addition and subtraction with the range limits. This is especially useful when the limits are specified with variables. Start, end and step are typically given as integers, but using float values is possible as well.

*** Test Cases ***
Only upper limit
    [Documentation]    Loops over values from 0 to 9.
    FOR    ${index}    IN RANGE    10
        Log    ${index}
    END

Start and end
    [Documentation]    Loops over values from 1 to 10.
    FOR    ${index}    IN RANGE    1    11
        Log    ${index}
    END

Also step given
    [Documentation]    Loops over values 5, 15, and 25.
    FOR    ${index}    IN RANGE    5    26    10
        Log    ${index}
    END

Negative step
    [Documentation]    Loops over values 13, 3, and -7.
    FOR    ${index}    IN RANGE    13    -13    -10
        Log    ${index}
    END

Arithmetic
    [Documentation]    Arithmetic with variable.
    FOR    ${index}    IN RANGE    ${var} + 1
        Log    ${index}
    END

Float parameters
    [Documentation]    Loops over values 3.14, 4.34, and 5.54.
    FOR    ${index}    IN RANGE    3.14    6.09    1.2
        Log    ${index}
    END

FOR-IN-ENUMERATE loop

Sometimes it is useful to loop over a list and also keep track of your location inside the list. Robot Framework has a special FOR index ... IN ENUMERATE ... syntax for this situation. This syntax is derived from the Python built-in enumerate() function.

FOR-IN-ENUMERATE loops syntax is just like the regular FOR loop syntax, except that the separator between variables and values is IN ENUMERATE (case-sensitive). Typically they are used so that there is an additional index variable before any other loop-variables. By default the index has a value 0 on the first iteration, 1 on the second, and so on.

For example, the following two test cases do the same thing:

*** Variables ***
@{LIST}         a    b    c

*** Test Cases ***
Manage index manually
    ${index} =    Set Variable    -1
    FOR    ${item}    IN    @{LIST}
        ${index} =    Evaluate    ${index} + 1
        My Keyword    ${index}    ${item}
    END

FOR-IN-ENUMERATE
    FOR    ${index}    ${item}    IN ENUMERATE    @{LIST}
        My Keyword    ${index}    ${item}
    END

Starting from Robot Framework 4.0, it is possible to specify a custom start index by using start=<index> syntax as the last item of the FOR ... IN ENUMERATE ... header:

*** Variables ***
@{LIST}         a    b    c
${START}        10

*** Test Cases ***
FOR-IN-ENUMERATE with start
    FOR    ${index}    ${item}    IN ENUMERATE    @{LIST}    start=1
        My Keyword    ${index}    ${item}
    END

Start as variable
    FOR    ${index}    ${item}    IN ENUMERATE    @{LIST}    start=${start}
        My Keyword    ${index}    ${item}
    END

The start=<index> syntax must be explicitly used in the FOR header and it cannot itself come from a variable. If the last actual item to enumerate would start with start=, it needs to be escaped like start\=.

Just like with regular FOR loops, you can loop over multiple values per loop iteration as long as the number of values in your list is evenly divisible by the number of loop-variables (excluding the index variable):

*** Test Cases ***
FOR-IN-ENUMERATE with two values per iteration
    FOR    ${index}    ${en}    ${fi}    IN ENUMERATE
    ...    cat      kissa
    ...    dog      koira
    ...    horse    hevonen
        Log    "${en}" in English is "${fi}" in Finnish (index: ${index})
    END

If you only use one loop variable with FOR-IN-ENUMERATE loops, that variable will become a Python tuple containing the index and the iterated value:

*** Test Cases ***
FOR-IN-ENUMERATE with one loop variable
    FOR    ${x}    IN ENUMERATE    @{LIST}
        Length Should Be    ${x}    2
        Log    Index is ${x}[0] and item is ${x}[1].
    END

Note

FOR-IN-ENUMERATE loops with only one loop variable is a new feature in Robot Framework 3.2.

FOR-IN-ZIP loop

Some tests build up several related lists, then loop over them together. Robot Framework has a shortcut for this case: FOR ... IN ZIP ..., which is derived from the Python built-in zip() function.

This may be easiest to show with an example:

*** Variables ***
@{NUMBERS}       ${1}    ${2}    ${5}
@{NAMES}         one     two     five

*** Test Cases ***
Iterate over two lists manually
    ${length}=    Get Length    ${NUMBERS}
    FOR    ${index}    IN RANGE    ${length}
        Log Many    ${NUMBERS}[${index}]    ${NAMES}[${index}]
    END

FOR-IN-ZIP
    FOR    ${number}    ${name}    IN ZIP    ${NUMBERS}    ${NAMES}
        Log Many    ${number}    ${name}
    END

As the example above illustrates, FOR-IN-ZIP loops require their own custom separator IN ZIP (case-sensitive) between loop variables and values. Values used with FOR-IN-ZIP loops must be lists or list-like objects.

Items to iterate over must always be given either as scalar variables like ${items} or as list variables like @{lists} that yield the actual iterated lists. The former approach is more common and it was already demonstrated above. The latter approach works like this:

*** Variables ***
@{NUMBERS}       ${1}    ${2}    ${5}
@{NAMES}         one     two     five
@{LISTS}         ${NUMBERS}    ${NAMES}

*** Test Cases ***
FOR-IN-ZIP with lists from variable
    FOR    ${number}    ${name}    IN ZIP    @{LISTS}
        Log Many    ${number}    ${name}
    END

The number of lists to iterate over is not limited, but it must match the number of loop variables. Alternatively, there can be just one loop variable that then becomes a Python tuple getting items from all lists.

*** Variables ***
@{ABC}           a    b    c
@{XYZ}           x    y    z
@{NUM}           1    2    3

*** Test Cases ***
FOR-IN-ZIP with multiple lists
    FOR    ${a}    ${x}    ${n}    IN ZIP    ${ABC}    ${XYZ}    ${NUM}
        Log Many    ${a}    ${x}    ${n}
    END

FOR-IN-ZIP with one variable
    FOR    ${items}    IN ZIP    ${ABC}    ${XYZ}    ${NUM}
        Length Should Be    ${items}    3
        Log Many    ${items}[0]    ${items}[1]    ${items}[2]
    END

Starting from Robot Framework 6.1, it is possible to configure what to do if lengths of the iterated items differ. By default, the shortest item defines how many iterations there are and values at the end of longer ones are ignored. This can be changed by using the mode option that has three possible values:

  • STRICT: Items must have equal lengths. If not, execution fails. This is the same as using strict=True with Python's zip function.
  • SHORTEST: Items in longer items are ignored. Infinite iterators are supported in this mode as long as one of the items is exhausted. This is the default behavior.
  • LONGEST: The longest item defines how many iterations there are. Missing values in shorter items are filled-in with value specified using the fill option or None if it is not used. This is the same as using Python's zip_longest function except that it has fillvalue argument instead of fill.

All these modes are illustrated by the following examples:

*** Variables ***
@{CHARACTERS}     a    b    c    d    f
@{NUMBERS}        1    2    3

*** Test Cases ***
STRICT mode
    [Documentation]    This loop fails due to lists lengths being different.
    FOR    ${c}    ${n}    IN ZIP    ${CHARACTERS}    ${NUMBERS}    mode=STRICT
        Log    ${c}: ${n}
    END

SHORTEST mode
    [Documentation]    This loop executes three times.
    FOR    ${c}    ${n}    IN ZIP    ${CHARACTERS}    ${NUMBERS}    mode=SHORTEST
        Log    ${c}: ${n}
    END

LONGEST mode
    [Documentation]    This loop executes five times.
    ...                On last two rounds `${n}` has value `None`.
    FOR    ${c}    ${n}    IN ZIP    ${CHARACTERS}    ${NUMBERS}    mode=LONGEST
        Log    ${c}: ${n}
    END

LONGEST mode with custom fill value
    [Documentation]    This loop executes five times.
    ...                On last two rounds `${n}` has value `0`.
    FOR    ${c}    ${n}    IN ZIP    ${CHARACTERS}    ${NUMBERS}    mode=LONGEST    fill=0
        Log    ${c}: ${n}
    END

Note

The behavior if list lengths differ will change in the future so that the STRICT mode will be the default. If that is not desired, the SHORTEST mode needs to be used explicitly.

Dictionary iteration

Normal FOR loops and FOR-IN-ENUMERATE loops support iterating over keys and values in dictionaries. This syntax requires at least one of the loop values to be a dictionary variable. It is possible to use multiple dictionary variables and to give additional items in key=value syntax. Items are iterated in the order they are defined and if same key gets multiple values the last value will be used.

*** Variables ***
&{DICT}          a=1    b=2    c=3

*** Test Cases ***
Dictionary iteration with FOR loop
    FOR    ${key}    ${value}    IN    &{DICT}
        Log    Key is '${key}' and value is '${value}'.
    END

Dictionary iteration with FOR-IN-ENUMERATE loop
    FOR    ${index}    ${key}    ${value}    IN ENUMERATE    &{DICT}
        Log    On round ${index} key is '${key}' and value is '${value}'.
    END

Multiple dictionaries and extra items in 'key=value' syntax
    &{more} =    Create Dictionary    e=5    f=6
    FOR    ${key}    ${value}    IN    &{DICT}    d=4    &{more}    g=7
        Log    Key is '${key}' and value is '${value}'.
    END

Typically it is easiest to use the dictionary iteration syntax so that keys and values get separate variables like in the above examples. With normal FOR loops it is also possible to use just a single variable that will become a tuple containing the key and the value. If only one variable is used with FOR-IN-ENUMERATE loops, it becomes a tuple containing the index, the key and the value. Two variables with FOR-IN-ENUMERATE loops means assigning the index to the first variable and making the second variable a tuple containing the key and the value.

*** Test Cases ***
One loop variable
    FOR    ${item}    IN    &{DICT}
        Log    Key is '${item}[0]' and value is '${item}[1]'.
    END

One loop variable with FOR-IN-ENUMERATE
    FOR    ${item}    IN ENUMERATE    &{DICT}
        Log    On round ${item}[0] key is '${item}[1]' and value is '${item}[2]'.
    END

Two loop variables with FOR-IN-ENUMERATE
    FOR    ${index}    ${item}    IN ENUMERATE    &{DICT}
        Log    On round ${index} key is '${item}[0]' and value is '${item}[1]'.
    END

In addition to iterating over names and values in dictionaries, it is possible to iterate over keys and then possibly fetch the value based on it. This syntax requires using dictionaries as list variables:

*** Test Cases ***
Iterate over keys
    FOR    ${key}    IN    @{DICT}
        Log    Key is '${key}' and value is '${DICT}[${key}]'.
    END

Note

Iterating over keys and values in dictionaries is a new feature in Robot Framework 3.2. With earlier version it is possible to iterate over dictionary keys like the last example above demonstrates.

Removing unnecessary keywords from outputs

FOR loops with multiple iterations often create lots of output and considerably increase the size of the generated output and log files. It is possible to remove or flatten unnecessary keywords using --removekeywords and --flattenkeywords command line options.

Repeating single keyword

FOR loops can be excessive in situations where there is only a need to repeat a single keyword. In these cases it is often easier to use BuiltIn keyword Repeat Keyword. This keyword takes a keyword and how many times to repeat it as arguments. The times to repeat the keyword can have an optional postfix times or x to make the syntax easier to read.

*** Test Cases ***
Example
    Repeat Keyword    5    Some Keyword    arg1    arg2
    Repeat Keyword    42 times    My Keyword
    Repeat Keyword    ${var}    Another Keyword    argument

2.9.2   WHILE loops

WHILE loops combine features of FOR loops and IF/ELSE structures. They specify a condition and repeat the loop body as long as the condition remains true. This can be utilised, for example, to repeat a nondeterministic sequence until the desired outcome happens, or in some cases they can be used as an alternative to FOR loops.

Note

WHILE loops are new in Robot Framework 5.0.

Basic WHILE syntax

*** Test Cases ***
Example
    VAR    ${rc}   1
    WHILE    ${rc} != 0
        ${rc} =    Keyword that returns zero on success
    END

The WHILE loop condition is evaluated in Python so that Python builtins like len() are available and modules are imported automatically to support usages like math.pi * math.pow(${radius}, 2) < 10. Normal variables like ${rc} in the above example are replaced before evaluation, but variables are also available in the evaluation namespace using the special $rc syntax. The latter approach is handy when the string representation of the variable cannot be used in the condition directly. For example, strings require quoting and multiline strings and string themselves containing quotes cause additional problems. See the Evaluating expressions appendix for more information and examples related to the evaluation syntax.

Starting from Robot Framework 6.1, the condition in a WHILE statement can be omitted. This is interpreted as the condition always being true, which may be useful with the limit option described below.

Limiting WHILE loop iterations

With WHILE loops, there is always a possibility to achieve an infinite loop, either by intention or by mistake. This happens when the loop condition never becomes false. While infinite loops have some utility in application programming, in automation an infinite loop is rarely a desired outcome. If such a loop occurs with Robot Framework, the execution must be forcefully stopped and no log or report can be created. For this reason, WHILE loops in Robot Framework have a default limit of 10 000 iterations. If the limit is exceeded, the loop fails.

The limit can be set with the limit configuration parameter either as a maximum iteration count or as a maximum time for the whole loop. When the limit is an iteration count, it is possible to use just integers like 100 and to add times or x suffix after the value like 100 times. When the limit is a timeout, it is possible to use time strings like 10 s or 1 hour 10 minutes. The limit can also be disabled altogether by using NONE (case-insensitive). All these options are illustrated by the examples below.

*** Test Cases ***
Limit as iteration count
    WHILE    True    limit=100
        Log    This is run 100 times.
    END
    WHILE    True    limit=10 times
        Log    This is run 10 times.
    END
    WHILE    True    limit=42x
        Log    This is run 42 times.
    END

Limit as time
    WHILE    True    limit=10 seconds
        Log    This is run 10 seconds.
    END

No limit
    WHILE    True    limit=NONE
        Log    This runs forever.
    END

Note

Support for using times and x suffixes with iteration counts is new in Robot Framework 7.0.

Keywords in a loop are not forcefully stopped if the limit is exceeded. Instead the loop is exited similarly as if the loop condition would have become false. A major difference is that the loop status will be FAIL in this case.

Starting from Robot Framework 6.1, it is possible to use on_limit parameter to configure the behaviour when the limit is exceeded. It supports two values pass and fail, case insensitively. If the value is pass, the execution will continue normally when the limit is reached and the status of the WHILE loop will be PASS. The value fail works similarly as the default behaviour, e.g. the loop and the test will fail if the limit is exceeded.

*** Test Cases ***
Continue when iteration limit is reached
    WHILE    True    limit=5    on_limit=pass
        Log    Loop will be executed five times
    END
    Log    This will be executed normally.

Continue when time limit is reached
    WHILE    True    limit=10s    on_limit=pass
        Log    Loop will be executed for 10 seconds.
        Sleep   0.5s
    END
    Log    This will be executed normally.

By default, the error message raised when the limit is reached is WHILE loop was aborted because it did not finish within the limit of 0.5 seconds. Use the 'limit' argument to increase or remove the limit if needed.. Starting from Robot Framework 6.1, the error message can be changed with the on_limit_message configuration parameter.

*** Test Cases ***
Limit as iteration count
    WHILE    True    limit=0.5s    on_limit_message=Custom While loop error message
        Log    This is run 0.5 seconds.
    END

Note

on_limit_message configuration parameter is new in Robot Framework 6.1.

Nesting WHILE loops

WHILE loops can be nested and also combined with other control structures:

*** Test Cases ***
Nesting WHILE
    ${x} =   Set Variable    10
    WHILE    ${x} > 0
        ${y} =   Set Variable    ${x}
        WHILE    ${y} > 0
            ${y} =    Evaluate    ${y} - 1
        END
        IF    ${x} > 5
            ${x} =    Evaluate    ${x} - 1
        ELSE
            ${x} =    Evaluate    ${x} - 2
        END
    END

Removing unnecessary keywords from outputs

WHILE loops with multiple iterations often create lots of output and considerably increase the size of the generated output and log files. It is possible to remove or flatten unnecessary keywords using --removekeywords and --flattenkeywords command line options.

2.9.3   Loop control using BREAK and CONTINUE

Both FOR and WHILE loop execution can be controlled with BREAK and CONTINUE statements. The former exits the whole loop prematurely and the latter stops executing the current loop iteration and continues to the next one. In practice they have the same semantics as break and continue statements in Python, Java, and many other programming languages.

Both BREAK and CONTINUE are typically used conditionally with IF/ELSE or TRY/EXCEPT structures, and especially the inline IF syntax is often convenient with them. These statements must be used in the loop body, possibly inside the aforementioned control structures, and using them in keyword called in the loop body is invalid.

*** Test Cases ***
BREAK with FOR
    ${text} =    Set Variable    zero
    FOR    ${var}    IN    one    two    three
        IF    '${var}' == 'two'    BREAK
        ${text} =    Set Variable    ${text}-${var}
    END
    Should Be Equal    ${text}    zero-one

CONTINUE with FOR
    ${text} =    Set Variable    zero
    FOR    ${var}    IN    one    two    three
        IF    '${var}' == 'two'    CONTINUE
        ${text} =    Set Variable    ${text}-${var}
    END
    Should Be Equal    ${text}    zero-one-three

CONTINUE and BREAK with WHILE
    WHILE    True
        TRY
             ${value} =    Do Something
        EXCEPT
            CONTINUE
        END
        Do something with value    ${value}
        BREAK
    END

Invalid BREAK usage
    [Documentation]    BREAK and CONTINUE can only be used in the loop body,
    ...                not in keywords used in the loop.
    FOR    ${var}    IN    one    two    three
        Invalid BREAK
    END

*** Keywords ***
Invalid BREAK
    [Documentation]    This keyword fails due to invalid syntax.
    BREAK

Note

BREAK and CONTINUE statements are new in Robot Framework 5.0 similarly as WHILE. Earlier versions supported controlling FOR loops using BuiltIn keywords Exit For Loop, Exit For Loop If, Continue For Loop and Continue For Loop If. These keywords still continue to work, but they will be deprecated and removed in the future.

Note

Also the RETURN statement can be used to a exit loop. It only works when loops are used inside a user keyword.

2.9.4   IF/ELSE syntax

Sometimes there is a need to execute some keywords conditionally. Starting from Robot Framework 4.0 there is a separate IF/ELSE syntax, but there are also other ways to execute keywords conditionally. Notice that if the logic gets complicated, it is typically better to move it into a test library.

Basic IF syntax

Robot Framework's native IF syntax starts with IF (case-sensitive) and ends with END (case-sensitive). The IF marker requires exactly one value that is the condition to evaluate. Keywords to execute if the condition is true are on their own rows between the IF and END markers. Indenting keywords in the IF block is highly recommended but not mandatory.

In the following example keywords Some keyword and Another keyword are executed if ${rc} is greater than zero:

*** Test Cases ***
Example
   IF    ${rc} > 0
       Some keyword
       Another keyword
   END

The condition is evaluated in Python so that Python builtins like len() are available and modules are imported automatically to support usages like platform.system() == 'Linux' and math.ceil(${x}) == 1. Normal variables like ${rc} in the above example are replaced before evaluation, but variables are also available in the evaluation namespace using the special $rc syntax. The latter approach is handy when the string representation of the variable cannot be used in the condition directly. For example, strings require quoting and multiline strings and string themselves containing quotes cause additional problems. For more information and examples related the evaluation syntax see the Evaluating expressions appendix.

ELSE branches

Like most other languages supporting conditional execution, Robot Framework IF syntax also supports ELSE branches that are executed if the IF condition is not true.

In this example Some keyword is executed if ${rc} is greater than zero and Another keyword is executed otherwise:

*** Test Cases ***
Example
    IF    ${rc} > 0
        Some keyword
    ELSE
        Another keyword
    END

ELSE IF branches

Robot Framework also supports ELSE IF branches that have their own condition that is evaluated if the initial condition is not true. There can be any number of ELSE IF branches and they are gone through in the order they are specified. If one of the ELSE IF conditions is true, the block following it is executed and remaining ELSE IF branches are ignored. An optional ELSE branch can follow ELSE IF branches and it is executed if all conditions are false.

In the following example different keyword is executed depending on is ${rc} positive, negative, zero, or something else like a string or None:

*** Test Cases ***
Example
    IF    $rc > 0
        Positive keyword
    ELSE IF    $rc < 0
        Negative keyword
    ELSE IF    $rc == 0
        Zero keyword
    ELSE
        Fail    Unexpected rc: ${rc}
    END

Notice that this example uses the ${rc} variable in the special $rc format to avoid evaluation failures if it is not a number. See the aforementioned Evaluating expressions appendix for more information about this syntax.

Inline IF

Normal IF/ELSE structure is a bit verbose if there is a need to execute only a single statement. An alternative to it is using inline IF syntax where the statement to execute follows the IF marker and condition directly and no END marker is needed. For example, the following two keywords are equivalent:

*** Keywords ***
Normal IF
    IF    $condition1
        Keyword    argument
    END
    IF    $condition2
        RETURN
    END

Inline IF
    IF    $condition1    Keyword    argument
    IF    $condition2    RETURN

The inline IF syntax supports also ELSE and ELSE IF branches:

*** Keywords ***
Inline IF/ELSE
    IF    $condition    Keyword    argument    ELSE    Another Keyword

Inline IF/ELSE IF/ELSE
    IF    $cond1    Keyword 1    ELSE IF    $cond2    Keyword 2    ELSE IF    $cond3    Keyword 3    ELSE    Keyword 4

As the latter example above demonstrates, inline IF with several ELSE IF and ELSE branches starts to get hard to understand. Long inline IF structures can be split into multiple lines using the common ... continuation syntax, but using a normal IF/ELSE structure or moving the logic into a test library is probably a better idea. Each inline IF branch can contain only one statement. If more statements are needed, normal IF/ELSE structure needs to be used instead.

If there is a need for an assignment with inline IF, the variable or variables to assign must be before the starting IF. Otherwise the logic is exactly the same as when assigning variables based on keyword return values. If assignment is used and no branch is run, the variable gets value None.

*** Keywords ***
Inline IF/ELSE with assignment
    ${var} =    IF    $condition    Keyword    argument    ELSE    Another Keyword

Inline IF/ELSE with assignment having multiple variables
    ${host}    ${port} =    IF    $production    Get Production Config    ELSE    Get Testing Config

Note

Inline IF syntax is new in Robot Framework 5.0.

Nested IF structures

IF structures can be nested with each others and with FOR loops. This is illustrated by the following example using advanced features such as FOR-IN-ENUMERATE loop, named-only arguments with user keywords and inline Python evaluation syntax (${{len(${items})}}):

*** Keywords ***
Log items
    [Arguments]    @{items}    ${log_values}=True
    IF    not ${items}
        Log to console    No items.
    ELSE IF    len(${items}) == 1
        IF    ${log_values}
            Log to console    One item: ${items}[0]
        ELSE
            Log to console    One item.
        END
    ELSE
        Log to console    ${{len(${items})}} items.
        IF    ${log_values}
            FOR    ${index}    ${item}    IN ENUMERATE    @{items}    start=1
                Log to console    Item ${index}: ${item}
            END
        END
    END

*** Test Cases ***
No items
    Log items

One item without logging value
    Log items    xxx    log_values=False

Multiple items
    Log items    a    b    c

Other ways to execute keywords conditionally

There are also other methods to execute keywords conditionally:

  • The name of the keyword used as a setup or a teardown with suites, tests and keywords can be specified using a variable. This facilitates changing them, for example, from the command line.
  • The BuiltIn keyword Run Keyword takes a keyword to actually execute as an argument and it can thus be a variable. The value of the variable can, for example, be got dynamically from an earlier keyword or given from the command line.
  • The BuiltIn keywords Run Keyword If and Run Keyword Unless execute a named keyword only if a certain expression is true or false, respectively. The new IF/ELSE syntax explained above is generally recommended, though.
  • Another BuiltIn keyword, Set Variable If, can be used to set variables dynamically based on a given expression.
  • There are several BuiltIn keywords that allow executing a named keyword only if a test case or test suite has failed or passed.

2.9.5   TRY/EXCEPT syntax

When a keyword fails, Robot Framework's default behavior is to stop the current test and executes its possible teardown. There can, however, be needs to handle these failures during execution as well. Robot Framework 5.0 introduces native TRY/EXCEPT syntax for this purpose, but there also other ways to handle errors.

Robot Framework's TRY/EXCEPT syntax is inspired by Python's exception handling syntax. It has same TRY, EXCEPT, ELSE and FINALLY branches as Python and they also mostly work the same way. A difference is that Python uses lower case try, except, etc. but with Robot Framework all this kind of syntax must use upper case letters. A bigger difference is that with Python exceptions are objects and with Robot Framework you are dealing with error messages as strings.

Catching exceptions with EXCEPT

The basic TRY/EXCEPT syntax can be used to handle failures based on error messages:

*** Test Cases ***
First example
    TRY
        Some Keyword
    EXCEPT    Error message
        Error Handler Keyword
    END
    Keyword Outside

In the above example, if Some Keyword passes, the EXCEPT branch is not run and execution continues after the TRY/EXCEPT structure. If the keyword fails with a message Error message (case-sensitive), the EXCEPT branch is executed. If the EXCEPT branch succeeds, execution continues after the TRY/EXCEPT structure. If it fails, the test fails and remaining keywords are not executed. If Some Keyword fails with any other exception, that failure is not handled and the test fails without executing remaining keywords.

There can be more than one EXCEPT branch. In that case they are matched one by one and the first matching branch is executed. One EXCEPT can also have multiple messages to match, and such a branch is executed if any of its messages match. In all these cases messages can be specified using variables in addition to literal strings.

*** Test Cases ***
Multiple EXCEPT branches
    TRY
        Some Keyword
    EXCEPT    Error message    # Try matching this first.
        Error Handler 1
    EXCEPT    Another error    # Try this if above did not match.
        Error Handler 2
    EXCEPT    ${message}       # Last match attempt, this time using a variable.
        Error Handler 3
    END

Multiple messages with one EXCEPT
    TRY
        Some Keyword
    EXCEPT    Error message    Another error    ${message}    # Match any of these.
        Error handler
    END

It is also possible to have an EXCEPT without messages, in which case it matches any error. There can be only one such EXCEPT and it must follow possible other EXCEPT branches:

*** Test Cases ***
Match any error
    TRY
        Some Keyword
    EXCEPT               # Match any error.
        Error Handler
    END

Match any after testing more specific errors
    TRY
        Some Keyword
    EXCEPT    Error message    # Try matching this first
        Error Handler 1
    EXCEPT                     # Match any that did not match the above.
        Error Handler 2
    END

Note

It is not possible to catch exceptions caused by invalid syntax.

Matching errors using patterns

By default matching an error using EXCEPT requires an exact match. That can be changed using a configuration option type= as an argument to the except clause. Valid values for the option are GLOB, REGEXP or START (case-insensitive) to make the match a glob pattern match, a regular expression match, or to match only the beginning of the error, respectively. Using value LITERAL has the same effect as the default behavior. If an EXCEPT has multiple messages, this option applies to all of them. The value of the option can be defined with a variable as well.

*** Variables ***
${MATCH TYPE}     regexp

*** Test Cases ***
Glob pattern
    TRY
        Some Keyword
    EXCEPT    ValueError: *    type=GLOB
        Error Handler 1
    EXCEPT    [Ee]rror ?? occurred    ${pattern}    type=glob
        Error Handler 2
    END

Regular expression
    TRY
        Some Keyword
    EXCEPT    ValueError: .*    type=${MATCH TYPE}
        Error Handler 1
    EXCEPT    [Ee]rror \\d+ occurred    type=Regexp    # Backslash needs to be escaped.
        Error Handler 2
    END

Match start
    TRY
        Some Keyword
    EXCEPT    ValueError:    ${beginning}    type=start
        Error Handler
    END

Explicit exact match
    TRY
        Some Keyword
    EXCEPT    ValueError: invalid literal for int() with base 10: 'ooops'    type=LITERAL
        Error Handler
    EXCEPT    Error 13 occurred    type=LITERAL
        Error Handler 2
    END

Note

Remember that the backslash character often used with regular expressions is an escape character in Robot Framework data. It thus needs to be escaped with another backslash when using it in regular expressions.

Capturing error message

When matching errors using patterns and when using EXCEPT without any messages to match any error, it is often useful to know the actual error that occurred. Robot Framework supports that by making it possible to capture the error message into a variable by adding AS  ${var} at the end of the EXCEPT statement:

*** Test Cases ***
Capture error
    TRY
        Some Keyword
    EXCEPT    ValueError: *    type=GLOB    AS   ${error}
        Error Handler 1    ${error}
    EXCEPT    [Ee]rror \\d+    (Invalid|Bad) usage    type=REGEXP    AS    ${error}
        Error Handler 2    ${error}
    EXCEPT    AS    ${error}
        Error Handler 3    ${error}
    END

Using ELSE to execute keywords when there are no errors

Optional ELSE branches make it possible to execute keywords if there is no error. There can be only one ELSE branch and it is allowed only after one or more EXCEPT branches:

*** Test Cases ***
ELSE branch
    TRY
        Some Keyword
    EXCEPT    X
        Log    Error 'X' occurred!
    EXCEPT    Y
        Log    Error 'Y' occurred!
    ELSE
        Log    No error occurred!
    END
    Keyword Outside

In the above example, if Some Keyword passes, the ELSE branch is executed, and if it fails with message X or Y, the appropriate EXCEPT branch run. In all these cases execution continues after the whole TRY/EXCEPT/ELSE structure. If Some Keyword fail any other way, EXCEPT and ELSE branches are not run and the TRY/EXCEPT/ELSE structure fails.

To handle both the case when there is any error and when there is no error, it is possible to use an EXCEPT without any message in combination with an ELSE:

*** Test Cases ***
Handle everything
    TRY
        Some Keyword
    EXCEPT    AS    ${err}
        Log    Error occurred: ${err}
    ELSE
        Log    No error occurred!
    END

Using FINALLY to execute keywords regardless are there errors or not

Optional FINALLY branches make it possible to execute keywords both when there is an error and when there is not. They are thus suitable for cleaning up after a keyword execution somewhat similarly as teardowns. There can be only one FINALLY branch and it must always be last. They can be used in combination with EXCEPT and ELSE branches and having also TRY/FINALLY structure is possible:

*** Test Cases ***
TRY/EXCEPT/ELSE/FINALLY
    TRY
        Some keyword
    EXCEPT
        Log    Error occurred!
    ELSE
        Log    No error occurred.
    FINALLY
        Log    Always executed.
    END

TRY/FINALLY
    Open Connection
    TRY
        Use Connection
    FINALLY
        Close Connection
    END

Other ways to handle errors

There are also other methods to execute keywords conditionally:

  • The BuiltIn keyword Run Keyword And Expect Error executes a named keyword and expects that it fails with a specified error message. It is basically the same as using TRY/EXCEPT with a specified message. The syntax to specify the error message is also identical except that this keyword uses glob pattern matching, not exact match, by default. Using the native TRY/EXCEPT functionality is generally recommended unless there is a need to support older Robot Framework versions that do not support it.
  • The BuiltIn keyword Run Keyword And Ignore Error executes a named keyword and returns its status as string PASS or FAIL along with possible return value or error message. It is basically the same as using TRY/EXCEPT/ELSE so that EXCEPT catches all errors. Using the native syntax is recommended unless old Robot Framework versions need to be supported.
  • The BuiltIn keyword Run Keyword And Return Status executes a named keyword and returns its status as a Boolean true or false. It is a wrapper for the aforementioned Run Keyword And Ignore Error. The native syntax is nowadays recommended instead.
  • Test teardowns and keyword teardowns can be used for cleaning up activities similarly as FINALLY branches.
  • When keywords are implemented in Python based libraries, all Python's error handling features are readily available. This is the recommended approach especially if needed logic gets more complicated.

2.10   Advanced features

2.10.1   Handling keywords with same names

Keywords that are used with Robot Framework are either library keywords or user keywords. The former come from standard libraries or external libraries, and the latter are either created in the same file where they are used or then imported from resource files. When many keywords are in use, it is quite common that some of them have the same name, and this section describes how to handle possible conflicts in these situations.

Keyword scopes

When only a keyword name is used and there are several keywords with that name, Robot Framework attempts to determine which keyword has the highest priority based on its scope. The keyword's scope is determined on the basis of how the keyword in question is created:

  1. Created as a user keyword in the currently executed suite file. These keywords have the highest priority and they are always used, even if there are other keywords with the same name elsewhere.
  2. Created in a resource file and imported either directly or indirectly from another resource file. This is the second-highest priority.
  3. Created in an external test library. These keywords are used, if there are no user keywords with the same name. However, if there is a keyword with the same name in the standard library, a warning is displayed.
  4. Created in a standard library. These keywords have the lowest priority.

Specifying a keyword explicitly

Scopes alone are not a sufficient solution, because there can be keywords with the same name in several libraries or resources, and thus, they provide a mechanism to use only the keyword of the highest priority. In such cases, it is possible to use the full name of the keyword, where the keyword name is prefixed with the name of the resource or library and a dot is a delimiter.

With library keywords, the long format means only using the format LibraryName.Keyword Name. For example, the keyword Run from the OperatingSystem library could be used as OperatingSystem.Run, even if there was another Run keyword somewhere else. If the library is in a module or package, the full module or package name must be used (for example, com.company.Library.Some Keyword). If a custom name is given to a library when importing it, the specified name must be used also in the full keyword name.

Resource files are specified in the full keyword name, similarly as library names. The name of the resource is derived from the basename of the resource file without the file extension. For example, the keyword Example in a resource file myresources.html can be used as myresources.Example. Note that this syntax does not work, if several resource files have the same basename. In such cases, either the files or the keywords must be renamed. The full name of the keyword is case-, space- and underscore-insensitive, similarly as normal keyword names.

Specifying explicit priority between libraries and resources

If there are multiple conflicts between keywords, specifying all the keywords in the long format can be quite a lot work. Using the long format also makes it impossible to create dynamic test cases or user keywords that work differently depending on which libraries or resources are available. A solution to both of these problems is specifying the keyword priorities explicitly using the keyword Set Library Search Order from the BuiltIn library.

Note

Although the keyword has the word library in its name, it works also with resource files. As discussed above, keywords in resources always have higher priority than keywords in libraries, though.

The Set Library Search Order accepts an ordered list or libraries and resources as arguments. When a keyword name in the test data matches multiple keywords, the first library or resource containing the keyword is selected and that keyword implementation used. If the keyword is not found from any of the specified libraries or resources, execution fails for conflict the same way as when the search order is not set.

For more information and examples, see the documentation of the keyword.

2.10.2   Timeouts

Sometimes keywords may take exceptionally long time to execute or just hang endlessly. Robot Framework allows you to set timeouts both for test cases and user keywords, and if a test or keyword is not finished within the specified time, the keyword that is currently being executed is forcefully stopped.

Stopping keywords in this manner may leave the library, the test environment or the system under test to an unstable state, and timeouts are recommended only when there is no safer option available. In general, libraries should be implemented so that keywords cannot hang or that they have their own timeout mechanism.

Test case timeout

The test case timeout can be set either by using the Test Timeout setting in the Setting section or the [Timeout] setting with individual test cases. Test Timeout defines a default timeout for all the test cases in that suite, whereas [Timeout] applies a timeout to a particular test case and overrides the possible default value.

Using an empty [Timeout] means that the test has no timeout even when Test Timeout is used. It is also possible to use explicit NONE value for this purpose. The timeout is effectively ignored also if its value is zero or negative.

Regardless of where the test timeout is defined, the value given to it contains the duration of the timeout. The duration must be given in Robot Framework's time format, that is, either directly in seconds like 10 or in a format like 1 minute 30 seconds. Timeouts can also be specified as variables making it possible to give them, for example, from the command line.

If there is a timeout and it expires, the keyword that is currently running is stopped and the test case fails. Keywords executed as part of test teardown are not interrupted if a test timeout occurs, though, but the test is nevertheless marked failed. If a keyword in teardown may hang, it can be stopped by using user keyword timeouts.

*** Settings ***
Test Timeout       2 minutes

*** Test Cases ***
Default timeout
    [Documentation]    Default timeout from Settings is used.
    Some Keyword    argument

Override
    [Documentation]    Override default, use 10 seconds timeout.
    [Timeout]    10
    Some Keyword    argument

Variables
    [Documentation]    It is possible to use variables too.
    [Timeout]    ${TIMEOUT}
    Some Keyword    argument

No timeout
    [Documentation]    Empty timeout means no timeout even when Test Timeout has been used.
    [Timeout]
    Some Keyword    argument

No timeout 2
    [Documentation]    Disabling timeout with NONE works too and is more explicit.
    [Timeout]    NONE
    Some Keyword    argument

User keyword timeout

Timeouts can be set for user keywords using the [Timeout] setting. The syntax is exactly the same as with test case timeout, but user keyword timeouts do not have any default value. If a user keyword timeout is specified using a variable, the value can be given also as a keyword argument.

*** Keywords ***
Hardcoded
    [Arguments]    ${arg}
    [Timeout]    1 minute 42 seconds
    Some Keyword    ${arg}

Configurable
    [Arguments]    ${arg}    ${timeout}
    [Timeout]    ${timeout}
    Some Keyword    ${arg}

Run Keyword with Timeout
    [Arguments]    ${keyword}    @{args}    &{kwargs}    ${timeout}=1 minute
    [Documentation]    Wrapper that runs another keyword with a configurable timeout.
    [Timeout]    ${timeout}
    Run Keyword    ${keyword}    @{args}    &{kwargs}

A user keyword timeout is applicable during the execution of that user keyword. If the total time of the whole keyword is longer than the timeout value, the currently executed keyword is stopped. User keyword timeouts are applicable also during a test case teardown, whereas test timeouts are not.

If both the test case and some of its keywords (or several nested keywords) have a timeout, the active timeout is the one with the least time left.

Note

With earlier Robot Framework versions it was possible to specify a custom error message to use if a timeout expires. This functionality was deprecated in Robot Framework 3.0.1 and removed in Robot Framework 3.2.

2.10.3   Parallel execution of keywords

When parallel execution is needed, it must be implemented in test library level so that the library executes the code on background. Typically this means that the library needs a keyword like Start Something that starts the execution and returns immediately, and another keyword like Get Results From Something that waits until the result is available and returns it. See Process library keywords Start Process and Wait For Process for an example.

3   Executing test cases

3.1   Basic usage

Robot Framework test cases are executed from the command line, and the end result is, by default, an output file in XML format and an HTML report and log. After the execution, output files can be combined and otherwise post-processed with the Rebot tool.

3.1.1   Starting test execution

Synopsis

robot [options] data
python -m robot [options] data
python path/to/robot/ [options] data

Execution is normally started using the robot command created as part of installation. Alternatively it is possible to execute the installed robot module using the selected Python interpreter. This is especially convenient if Robot Framework has been installed under multiple Python versions. Finally, if you know where the installed robot directory exists, it can be executed using Python as well.

Regardless of execution approach, the path (or paths) to the test data to be executed is given as an argument after the command. Additionally, different command line options can be used to alter the test execution or generated outputs in many ways.

Specifying test data to be executed

Robot Framework test cases are created in files and directories, and they are executed by giving the path to the file or directory in question to the selected runner script. The path can be absolute or, more commonly, relative to the directory where tests are executed from. The given file or directory creates the top-level test suite, which, by default, gets its name from the file or directory name. Different execution possibilities are illustrated in the examples below. Note that in these examples, as well as in other examples in this section, only the robot script is used, but other execution approaches could be used similarly.

robot tests.robot
robot path/to/my_tests/
robot c:\robot\tests.robot

Note

When executing a directory, all files and directories starting with a dot (.) or an underscore (_) are ignored and, by default, only files with the .robot extension executed. See the Selecting files to parse section for more details.

It is also possible to give paths to several test case files or directories at once, separated with spaces. In this case, Robot Framework creates the top-level test suite automatically, and the specified files and directories become its child test suites. The name of the created test suite is got from child suite names by concatenating them together with an ampersand (&) and spaces. For example, the name of the top-level suite in the first example below is My Tests & Your Tests. These automatically created names are often quite long and complicated. In most cases, it is thus better to use the --name option for overriding it, as in the second example below:

robot my_tests.robot your_tests.robot
robot --name Example path/to/tests/pattern_*.robot

Starting from Robot Framework 6.1, it is also possible to define a test suite initialisation file for the automatically created top-level suite. The path to the init file is given similarly to the test case files:

robot __init__.robot my_tests.robot other_tests.robot

3.1.2   Using command line options

Robot Framework provides a number of command line options that can be used to control how test cases are executed and what outputs are generated. This section explains the option syntax, and what options actually exist. How they can be used is discussed elsewhere in this chapter.

Using options

When options are used, they must always be given between the runner script and the data sources. For example:

robot -L debug my_tests.robot
robot --include smoke --variable HOST:10.0.0.42 path/to/tests/

Short and long options

Options always have a long name, such as --name, and the most frequently needed options also have a short name, such as -N. In addition to that, long options can be shortened as long as they are unique. For example, --logle DEBUG works, while --lo log.html does not, because the former matches only --loglevel, but the latter matches several options. Short and shortened options are practical when executing test cases manually, but long options are recommended in start-up scripts, because they are easier to understand.

The long option names are case-insensitive and hyphen-insensitive, which facilitates writing option names in an easy-to-read format. For example, --SuiteStatLevel and --suite-stat-level are equivalent to, but easier to read than, --suitestatlevel.

Note

Long options being hyphen-insensitive is new in Robot Framework 6.1.

Setting option values

Most of the options require a value, which is given after the option name. Both short and long options accept the value separated from the option name with a space, as in --include tag or -i tag. With long options, the separator can also be the equals sign, for example --include=tag, and with short options the separator can be omitted, as in -itag.

Some options can be specified several times. For example, --variable VAR1:value --variable VAR2:another sets two variables. If the options that take only one value are used several times, the value given last is effective.

Disabling options accepting no values

Options accepting no values can be disabled by using the same option again with no prefix added or dropped. The last option has precedence regardless of how many times options are used. For example, --dryrun --dryrun --nodryrun --nostatusrc --statusrc would not activate the dry-run mode and would return normal status rc.

Simple patterns

Many command line options take arguments as simple patterns. These glob-like patterns are matched according to the following rules:

  • * matches any string, even an empty string.
  • ? matches any single character.
  • [abc] matches one character in the bracket.
  • [!abc] matches one character not in the bracket.
  • [a-z] matches one character from the range in the bracket.
  • [!a-z] matches one character not from the range in the bracket.
  • Unlike with glob patterns normally, path separator characters / and \ and the newline character \n are matches by the above wildcards.
  • Unless noted otherwise, pattern matching is case, space, and underscore insensitive.

Examples:

--test Example*        # Matches tests with name starting 'Example'.
--test Example[1-2]    # Matches tests 'Example1' and 'Example2'.
--include f??          # Matches tests with a tag that starts with 'f' is three characters long.

All matching in above examples is case, space and underscore insensitive. For example, the second example would also match test named example 1.

If the matched text happens to contain some of the wildcard characters and they need to be matched literally, it is possible to do that by using the [...] syntax. The pattern [*] matches the literal * character, [?] matches ?, and [[] matches [. Lone [ and ] do not need to be escaped.

Note

Support for brackets like [abc] and [!a-z] is new in Robot Framework 3.1.

Tag patterns

Most tag related options accept arguments as tag patterns. They support same wildcards as simple patterns (e.g. examp??, ex*le), but they also support AND, OR and NOT operators explained below. These operators can be used for combining two or more individual tags or patterns together.

AND or &

The whole pattern matches if all individual patterns match. AND and & are equivalent:

--include fooANDbar     # Matches tests containing tags 'foo' and 'bar'.
--exclude xx&yy&zz      # Matches tests containing tags 'xx', 'yy', and 'zz'.
OR

The whole pattern matches if any individual pattern matches:

--include fooORbar      # Matches tests containing either tag 'foo' or tag 'bar'.
--exclude xxORyyORzz    # Matches tests containing any of tags 'xx', 'yy', or 'zz'.
NOT

The whole pattern matches if the pattern on the left side matches but the one on the right side does not. If used multiple times, none of the patterns after the first NOT must not match:

--include fooNOTbar     # Matches tests containing tag 'foo' but not tag 'bar'.
--exclude xxNOTyyNOTzz  # Matches tests containing tag 'xx' but not tag 'yy' or tag 'zz'.

The pattern can also start with NOT in which case the pattern matches if the pattern after NOT does not match:

--include NOTfoo        # Matches tests not containing tag 'foo'
--include NOTfooANDbar  # Matches tests not containing tags 'foo' and 'bar'

The above operators can also be used together. The operator precedence, from highest to lowest, is AND, OR and NOT:

--include xANDyORz      # Matches tests containing either tags 'x' and 'y', or tag 'z'.
--include xORyNOTz      # Matches tests containing either tag 'x' or 'y', but not tag 'z'.
--include xNOTyANDz     # Matches tests containing tag 'x', but not tags 'y' and 'z'.

Although tag matching itself is case-insensitive, all operators are case-sensitive and must be written with upper case letters. If tags themselves happen to contain upper case AND, OR or NOT, they need to specified using lower case letters to avoid accidental operator usage:

--include port          # Matches tests containing tag 'port', case-insensitively
--include PORT          # Matches tests containing tag 'P' or 'T', case-insensitively
--exclude handoverORportNOTnotification

ROBOT_OPTIONS and REBOT_OPTIONS environment variables

Environment variables ROBOT_OPTIONS and REBOT_OPTIONS can be used to specify default options for test execution and result post-processing, respectively. The options and their values must be defined as a space separated list and they are placed in front of any explicit options on the command line. The main use case for these environment variables is setting global default values for certain options to avoid the need to repeat them every time tests are run or Rebot used.

export ROBOT_OPTIONS="--outputdir results --tagdoc 'mytag:Example doc with spaces'"
robot tests.robot
export REBOT_OPTIONS="--reportbackground blue:red:yellow"
rebot --name example output.xml

3.1.3   Test results

Command line output

The most visible output from test execution is the output displayed in the command line. All executed test suites and test cases, as well as their statuses, are shown there in real time. The example below shows the output from executing a simple test suite with only two test cases:

==============================================================================
Example test suite
==============================================================================
First test :: Possible test documentation                             | PASS |
------------------------------------------------------------------------------
Second test                                                           | FAIL |
Error message is displayed here
==============================================================================
Example test suite                                                    | FAIL |
2 tests, 1 passed, 1 failed
==============================================================================
Output:  /path/to/output.xml
Report:  /path/to/report.html
Log:     /path/to/log.html

There is also a notification on the console whenever a top-level keyword in a test case ends. A green dot is used if a keyword passes and a red F if it fails. These markers are written to the end of line and they are overwritten by the test status when the test itself ends. Writing the markers is disabled if console output is redirected to a file.

Generated output files

The command line output is very limited, and separate output files are normally needed for investigating the test results. As the example above shows, three output files are generated by default. The first one is in XML format and contains all the information about test execution. The second is a higher-level report and the third is a more detailed log file. These files and other possible output files are discussed in more detail in the section Different output files.

Return codes

Runner scripts communicate the overall test execution status to the system running them using return codes. When the execution starts successfully and no tests fail, the return code is zero. All possible return codes are explained in the table below.

Possible return codes
RC Explanation
0 All tests passed.
1-249 Returned number of tests failed.
250 250 or more failures.
251 Help or version information printed.
252 Invalid test data or command line options.
253 Test execution stopped by user.
255 Unexpected internal error.

Return codes should always be easily available after the execution, which makes it easy to automatically determine the overall execution status. For example, in bash shell the return code is in special variable $?, and in Windows it is in %ERRORLEVEL% variable. If you use some external tool for running tests, consult its documentation for how to get the return code.

The return code can be set to 0 even if there are failures using the --NoStatusRC command line option. This might be useful, for example, in continuous integration servers where post-processing of results is needed before the overall status of test execution can be determined.

Note

Same return codes are also used with Rebot.

Errors and warnings during execution

During the test execution there can be unexpected problems like failing to import a library or a resource file or a keyword being deprecated. Depending on the severity such problems are categorized as errors or warnings and they are written into the console (using the standard error stream), shown on a separate Test Execution Errors section in log files, and also written into Robot Framework's own system log. Normally these errors and warnings are generated by Robot Framework itself, but libraries can also log errors and warnings. Example below illustrates how errors and warnings look like in the log file.

20090322 19:58:42.528 ERROR Error in file '/home/robot/tests.robot' in table 'Setting' in element on row 2: Resource file 'resource.robot' does not exist
20090322 19:58:43.931 WARN Keyword 'SomeLibrary.Example Keyword' is deprecated. Use keyword `Other Keyword` instead.

3.1.4   Argument files

Argument files allow placing all or some command line options and arguments into an external file where they will be read. This avoids the problems with characters that are problematic on the command line. If lot of options or arguments are needed, argument files also prevent the command that is used on the command line growing too long.

Argument files are taken into use with --argumentfile (-A) option along with possible other command line options.

Note

Unlike other long command line options, --argumentfile cannot be given in shortened format like --argumentf.

Argument file syntax

Argument files can contain both command line options and paths to the test data, one option or data source per line. Both short and long options are supported, but the latter are recommended because they are easier to understand. Argument files can contain any characters without escaping, but spaces in the beginning and end of lines are ignored. Additionally, empty lines and lines starting with a hash mark (#) are ignored:

--doc This is an example (where "special characters" are ok!)
--metadata X:Value with spaces
--variable VAR:Hello, world!
# This is a comment
path/to/my/tests

In the above example the separator between options and their values is a single space. It is possible to use either an equal sign (=) or any number of spaces. As an example, the following three lines are identical:

--name An Example
--name=An Example
--name       An Example

If argument files contain non-ASCII characters, they must be saved using UTF-8 encoding.

Using argument files

Argument files can be used either alone so that they contain all the options and paths to the test data, or along with other options and paths. When an argument file is used with other arguments, its contents are placed into the original list of arguments to the same place where the argument file option was. This means that options in argument files can override options before it, and its options can be overridden by options after it. It is possible to use --argumentfile option multiple times or even recursively:

robot --argumentfile all_arguments.robot
robot --name Example --argumentfile other_options_and_paths.robot
robot --argumentfile default_options.txt --name Example my_tests.robot
robot -A first.txt -A second.txt -A third.txt tests.robot

Reading argument files from standard input

Special argument file name STDIN can be used to read arguments from the standard input stream instead of a file. This can be useful when generating arguments with a script:

generate_arguments.sh | robot --argumentfile STDIN
generate_arguments.sh | robot --name Example --argumentfile STDIN tests.robot

3.1.5   Getting help and version information

Both when executing test cases and when post-processing outputs, it is possible to get command line help with the option --help (-h). These help texts have a short general overview and briefly explain the available command line options.

All runner scripts also support getting the version information with the option --version. This information also contains Python version and the platform type:

$ robot --version
Robot Framework 7.0 (Python 3.12.1 on darwin)

C:\>rebot --version
Rebot 6.1.1 (Python 3.11.0 on win32)

3.1.6   Creating start-up scripts

Test cases are often executed automatically by a continuous integration system or some other mechanism. In such cases, there is a need to have a script for starting the test execution, and possibly also for post-processing outputs somehow. Similar scripts are also useful when running tests manually, especially if a large number of command line options are needed or setting up the test environment is complicated.

In UNIX-like environments, shell scripts provide a simple but powerful mechanism for creating custom start-up scripts. Windows batch files can also be used, but they are more limited and often also more complicated. A platform-independent alternative is using Python or some other high-level programming language. Regardless of the language, it is recommended that long option names are used, because they are easier to understand than the short names.

Shell script example

In this example, the same web tests in the login directory are executed with different browsers and the results combined afterwards using Rebot. The script also accepts command line options itself and simply forwards them to the robot command using the handy $* variable:

#!/bin/bash
robot --name Firefox --variable BROWSER:Firefox --output out/fx.xml --log none --report none $* login
robot --name IE --variable BROWSER:IE --output out/ie.xml --log none --report none  $* login
rebot --name Login --outputdir out --output login.xml out/fx.xml out/ie.xml

Batch file example

Implementing the above shell script example using batch files is not very complicated either. Notice that arguments to batch files can be forwarded to executed commands using %*:

@echo off
robot --name Firefox --variable BROWSER:Firefox --output out\fx.xml --log none --report none %* login
robot --name IE --variable BROWSER:IE --log none --output out\ie.xml --report none %* login
rebot --name Login --outputdir out --output login.xml out\fx.xml out\ie.xml

Note

Prior to Robot Framework 3.1 robot and rebot commands were implemented as batch files on Windows and using them in another batch file required prefixing the whole command with call.

Python example

When start-up scripts gets more complicated, implementing them using shell scripts or batch files is not that convenient. This is especially true if both variants are needed and same logic needs to be implemented twice. In such situations it is often better to switch to Python. It is possible to execute Robot Framework from Python using the subprocess module, but often using Robot Framework's own programmatic API is more convenient. The easiest APIs to use are robot.run_cli and robot.rebot_cli that accept same command line arguments than the robot and rebot commands.

The following example implements the same logic as the earlier shell script and batch file examples. In Python arguments to the script itself are available in sys.argv:

#!/usr/bin/env python
import sys
from robot import run_cli, rebot_cli

common = ['--log', 'none', '--report', 'none'] + sys.argv[1:] + ['login']
run_cli(['--name', 'Firefox', '--variable', 'BROWSER:Firefox', '--output', 'out/fx.xml'] + common, exit=False)
run_cli(['--name', 'IE', '--variable', 'BROWSER:IE', '--output', 'out/ie.xml'] + common, exit=False)
rebot_cli(['--name', 'Login', '--outputdir', 'out', 'out/fx.xml', 'out/ie.xml'])

Note

exit=False is needed because by default run_cli exits to system with the correct return code. rebot_cli does that too, but in the above example that is fine.

3.1.7   Making *.robot files executable

On UNIX-like operating systems it is possible to make *.robot files executable by giving them execution permission and adding a shebang like in this example:

#!/usr/bin/env robot

*** Test Cases ***
Example
    Log to console    Executing!

If the above content would be in a file example.robot and that file would be executable, it could be executed from the command line like below. Starting from Robot Framework 3.2, individually executed files can have any extension, or no extension at all, so the same would work also if the file would be named just example.

./example.robot

This trick does not work when executing a directory but can be handy when executing a single file. It is probably more often useful when automating tasks than when automating tests.

3.1.8   Debugging problems

A test case can fail because the system under test does not work correctly, in which case the test has found a bug, or because the test itself is buggy. The error message explaining the failure is shown on the command line output and in the report file, and sometimes the error message alone is enough to pinpoint the problem. More often that not, however, log files are needed because they have also other log messages and they show which keyword actually failed.

When a failure is caused by the tested application, the error message and log messages ought to be enough to understand what caused it. If that is not the case, the test library does not provide enough information and needs to be enhanced. In this situation running the same test manually, if possible, may also reveal more information about the issue.

Failures caused by test cases themselves or by keywords they use can sometimes be hard to debug. If the error message, for example, tells that a keyword is used with wrong number of arguments fixing the problem is obviously easy, but if a keyword is missing or fails in unexpected way finding the root cause can be harder. The first place to look for more information is the execution errors section in the log file. For example, an error about a failed test library import may well explain why a test has failed due to a missing keyword.

If the log file does not provide enough information by default, it is possible to execute tests with a lower log level. For example tracebacks showing where in the code the failure occurred are logged using the DEBUG level, and this information is invaluable when the problem is in an individual library keyword.

Logged tracebacks do not contain information about methods inside Robot Framework itself. If you suspect an error is caused by a bug in the framework, you can enable showing internal traces by setting environment variable ROBOT_INTERNAL_TRACES to any non-empty value.

If the log file still does not have enough information, it is a good idea to enable the syslog and see what information it provides. It is also possible to add some keywords to the test cases to see what is going on. Especially BuiltIn keywords Log and Log Variables are useful. If nothing else works, it is always possible to search help from mailing lists or elsewhere.

Using the Python debugger (pdb)

It is also possible to use the pdb module from the Python standard library to set a break point and interactively debug a running test. The typical way of invoking pdb by inserting:

import pdb; pdb.set_trace()

at the location you want to break into debugger will not work correctly with Robot Framework, as the standard output stream is redirected during keyword execution. Instead, you can use the following:

import sys, pdb; pdb.Pdb(stdout=sys.__stdout__).set_trace()

from within a python library or alternatively:

Evaluate    pdb.Pdb(stdout=sys.__stdout__).set_trace()    modules=sys, pdb

can be used directly in a test case.

3.2   Test execution

This section describes how the test suite structure created from the parsed test data is executed, how test status is determined, and how to continue executing a test case if there are failures, and how to stop the whole test execution gracefully.

3.2.1   Execution flow

Executed suites and tests

Test cases are always executed within a test suite. A test suite created from a suite file has tests directly, whereas suites created from directories have child test suites which either have tests or their own child suites. By default all the tests in an executed suite are run, but it is possible to select tests using options --test, --suite, --include and --exclude. Suites containing no tests are ignored.

The execution starts from the top-level test suite. If the suite has tests they are executed one-by-one, and if it has suites they are executed recursively in depth-first order. When an individual test case is executed, the keywords it contains are run in a sequence. Normally the execution of the current test ends if any of the keywords fails, but it is also possible to continue after failures. The exact execution order and how possible setups and teardowns affect the execution are discussed in the following sections.

Setups and teardowns

Setups and teardowns can be used on test suite, test case and user keyword levels.

Suite setup

If a test suite has a setup, it is executed before its tests and child suites. If the suite setup passes, test execution continues normally. If it fails, all the test cases the suite and its child suites contain are marked failed. The tests and possible suite setups and teardowns in the child test suites are not executed.

Suite setups are often used for setting up the test environment. Because tests are not run if the suite setup fails, it is easy to use suite setups for verifying that the environment is in state in which the tests can be executed.

Suite teardown

If a test suite has a teardown, it is executed after all its test cases and child suites. Suite teardowns are executed regardless of the test status and even if the matching suite setup fails. If the suite teardown fails, all tests in the suite are marked failed afterwards in reports and logs.

Suite teardowns are mostly used for cleaning up the test environment after the execution. To ensure that all these tasks are done, all the keywords used in the teardown are executed even if some of them fail.

Test setup

Possible test setup is executed before the keywords of the test case. If the setup fails, the keywords are not executed. The main use for test setups is setting up the environment for that particular test case.

Test teardown

Possible test teardown is executed after the test case has been executed. It is executed regardless of the test status and also if test setup has failed.

Similarly as suite teardown, test teardowns are used mainly for cleanup activities. Also they are executed fully even if some of their keywords fail.

User keyword setup

User keyword setup is executed before the keyword body. If the setup fails, the body is not executed. There is not much difference between the keyword setup and the first keyword in the body.

Note

User keyword setups are new in Robot Framework 7.0.

User keyword teardown

User keyword teardown is run after the keyword is executed otherwise, regardless the status. User keyword teardowns are executed fully even if some of their keywords would fail.

Execution order

Test cases in a test suite are executed in the same order as they are defined in the test case file. Test suites inside a higher level test suite are executed in case-insensitive alphabetical order based on the file or directory name. If multiple files and/or directories are given from the command line, they are executed in the order they are given.

If there is a need to use certain test suite execution order inside a directory, it is possible to add prefixes like 01 and 02 into file and directory names. Such prefixes are not included in the generated test suite name if they are separated from the base name of the suite with two underscores:

01__my_suite.robot -> My Suite
02__another_suite.robot -> Another Suite

If the alphabetical ordering of test suites inside suites is problematic, a good workaround is giving them separately in the required order. This easily leads to overly long start-up commands, but argument files allow listing files nicely one file per line.

It is also possible to randomize the execution order using the --randomize option.

3.2.2   Test and suite statuses

This section explains how tests can get PASS, FAIL or SKIP status and how the suite status is determined based on test statuses.

Note

The SKIP status is new in Robot Framework 4.0.

PASS

A test gets the PASS status if it is executed and none of the keywords it contains fails.

Prematurely passing tests

Normally all keywords are executed, but it is also possible to use BuiltIn keywords Pass Execution and Pass Execution If to stop execution with the PASS status and not run the remaining keywords.

How Pass Execution and Pass Execution If behave in different situations is explained below:

  • When used in any setup or teardown (suite, test or keyword), these keywords pass that setup or teardown. Possible teardowns of the started keywords are executed. Test execution or statuses are not affected otherwise.
  • When used in a test case outside setup or teardown, the keywords pass that particular test case. Possible test and keyword teardowns are executed.
  • Possible continuable failures that occur before these keyword are used, as well as failures in teardowns executed afterwards, will fail the execution.
  • It is mandatory to give an explanation message why execution was interrupted, and it is also possible to modify test case tags. For more details, and usage examples, see the documentation of these keywords.

Passing execution in the middle of a test, setup or teardown should be used with care. In the worst case it leads to tests that skip all the parts that could actually uncover problems in the tested application. In cases where execution cannot continue do to external factors, it is often safer to skip the test.

FAIL

The most common reason for a test to get the FAIL status is that one of the keywords it contains fails. The keyword itself can fail by raising an exception or the keyword can be called incorrectly. Other reasons for failures include syntax errors and the test being empty.

If a suite setup fails, tests in that suite are marked failed without running them. If a suite teardown fails, tests are marked failed retroactively.

Migrating from criticality to SKIP

Earlier Robot Framework versions supported criticality concept that allowed marking tests critical or non-critical. By default all tests were critical, but the --critical and --noncritical options could be used to configure that. The difference between critical and non-critical tests was that non-critical tests were not included when determining the final status for an executed test suite or for the whole test run. In practice the test status was two dimensional having PASS and FAIL in one axis and criticality on the other.

Non-critical failed tests were in many ways similar to the current skipped tests. Because these features are similar and having both SKIP and criticality would have created strange test statuses like non-critical SKIP, the criticality concept was removed in Robot Framework 4.0 when the SKIP status was introduced. The problems with criticality are explained in more detail in the issue that proposed removing it.

The main use case for the criticality concept was being able to run tests that are not yet ready or that are testing a functionality that is not yet ready. This use case is nowadays covered by the skip-on-failure functionality discussed in the previous section.

To ease migrating from criticality to skipping, the old --noncritical option worked as an alias for the new --skiponfailure in Robot Framework 4.0 and also the old --critical option was preserved. Both old options were deprecated and they were removed in Robot Framework 5.0.

Suite status

Suite status is determined solely based on statuses of the tests it contains:

  • If any test has failed, suite status is FAIL.
  • If there are no failures but at least one test has passed, suite status is PASS.
  • If all tests have been skipped or the are no tests at all, suite status is SKIP.

3.2.3   Continuing on failure

Normally test cases are stopped immediately when any of their keywords fail. This behavior shortens test execution time and prevents subsequent keywords hanging or otherwise causing problems if the system under test is in unstable state. This has a drawback that often subsequent keywords would give more information about the state of the system, though, and in some cases those subsequent keywords would actually take care of the needed cleanup activities. Hence Robot Framework offers several features to continue even if there are failures.

Execution continues on teardowns automatically

To make it sure that all the cleanup activities are taken care of, the continue-on-failure mode is automatically enabled in suite, test and keyword teardowns. In practice this means that in teardowns all the keywords in all levels are always executed.

If this behavior is not desired, the special robot:stop-on-failure and robot:recursive-stop-on-failure tags can be used to disable it.

All top-level keywords are executed when tests have templates

When using test templates, all the top-level keywords are executed to make it sure that all the different combinations are covered. In this usage continuing is limited to the top-level keywords, and inside them the execution ends normally if there are non-continuable failures.

*** Test Cases ***
Continue with templates
    [Template]    Should be Equal
    this    fails
    this    is run

If this behavior is not desired, the special robot:stop-on-failure and robot:recursive-stop-on-failure tags can be used to disable it.

Special failures from keywords

Library keywords report failures using exceptions, and it is possible to use special exceptions to tell Robot Framework that execution can continue regardless the failure. How these exceptions can be created is explained in the Continuable failures section in the Creating test libraries section.

When a test ends and there have been continuable failures, the test will be marked failed. If there are more than one failure, all of them will be enumerated in the final error message:

Several failures occurred:

1) First error message.

2) Second error message.

Test execution ends also if a normal failure occurs after a continuable failure. Also in that case all the failures will be listed in the final error message.

The return value from failed keywords, possibly assigned to a variable, is always the Python None.

Run Keyword And Continue On Failure keyword

BuiltIn keyword Run Keyword And Continue On Failure allows converting any failure into a continuable failure. These failures are handled by the framework exactly the same way as continuable failures originating from library keywords discussed above.

*** Test Cases ***
Example
    Run Keyword and Continue on Failure    Should be Equal    1    2
    Log    This is executed but test fails in the end

Enabling continue-on-failure using tags

All keywords executed as part of test cases or user keywords which are tagged with the robot:continue-on-failure tag are considered continuable by default. For example, the following two tests behave identically:

*** Test Cases ***
Test 1
    Run Keyword and Continue on Failure    Should be Equal    1    2
    User Keyword 1

Test 2
    [Tags]    robot:continue-on-failure
    Should be Equal    1    2
    User Keyword 2

*** Keywords ***
User Keyword 1
    Run Keyword and Continue on Failure    Should be Equal    3    4
    Log    This is executed

User Keyword 2
    [Tags]    robot:continue-on-failure
    Should be Equal    3    4
    Log    This is executed

These tags also affect the continue-on-failure mode with different control structures. For example, the below test case will execute the Do Something keyword ten times regardless does it succeed or not:

*** Test Cases ***
Example
    [Tags]    robot:continue-on-failure
    FOR    ${index}    IN RANGE    10
        Do Something
    END

Setting robot:continue-on-failure within a test case or a user keyword will not propagate the continue-on-failure behavior into user keywords they call. If such recursive behavior is needed, the robot:recursive-continue-on-failure tag can be used. For example, all keywords in the following example are executed:

*** Test Cases ***
Example
    [Tags]    robot:recursive-continue-on-failure
    Should be Equal    1    2
    User Keyword 1
    Log    This is executed

*** Keywords ***
User Keyword 1
    Should be Equal    3    4
    User Keyword 2
    Log    This is executed

User Keyword 2
    Should be Equal    5    6
    Log    This is executed

Setting robot:continue-on-failure or robot:recursive-continue-on-failure in a test case does NOT alter the behaviour of a failure in the keyword(s) executed as part of the [Setup]: The test case is marked as failed and no test case keywords are executed.

Note

The robot:continue-on-failure and robot:recursive-continue-on-failure tags are new in Robot Framework 4.1. They do not work properly with WHILE loops prior to Robot Framework 6.0.

Disabling continue-on-failure using tags

Special tags robot:stop-on-failure and robot:recursive-stop-on-failure can be used to disable the continue-on-failure mode if needed. They work when continue-on-failure has been enabled using tags and also with teardowns and templates:

*** Test Cases ***
Disable continue-in-failure set using tags
    [Tags]    robot:recursive-continue-on-failure
    Keyword
    Keyword    # This is executed

Disable continue-in-failure in teardown
    No Operation
    [Teardown]    Keyword

Disable continue-in-failure with templates
    [Tags]    robot:stop-on-failure
    [Template]    Should be Equal
    this    fails
    this    is not run

*** Keywords ***
Keyword
    [Tags]    robot:stop-on-failure
    Should be Equal    this    fails
    Should be Equal    this    is not run

The robot:stop-on-failure tag affects only test cases and user keywords where it is used and does not propagate to user keywords they call nor to their own teardowns. If recursive behavior affecting all called user keywords and teardowns is desired, the robot:recursive-stop-on-failure tag can be used instead. If there is a need, its effect can again be disabled in lower level keywords by using robot:continue-on-failure or robot:recursive-continue-on-failure tags.

The robot:stop-on-failure and robot:recursive-stop-on-failure tags do not alter the behavior of continuable failures caused by library keywords or by Run Keyword And Continue On Failure. For example, both keywords in this example are run even though robot:stop-on-failure is used:

*** Test Cases ***
Example
    [Tags]    robot:stop-on-failure
    Run Keyword and Continue on Failure    Should be Equal    1    2
    Log    This is executed regardless the tag

If robot:recursive-stop-on-failure and robot:continue-on-failure are used together in the same test or keyword, execution is stopped in called keywords if there are failures, but continues in the test or keyword using these tags. If robot:recursive-continue-on-failure and robot:stop-on-failure are used together in the same test or keyword, execution is continued in called keywords if there are failures, but stopped in the test or keyword using these tags.

Note

The robot:stop-on-failure and robot:recursive-stop-on-failure tags are new in Robot Framework 6.0.

Note

Using recursive and non-recursive tags together in same test or keyword is new in Robot Framework 7.0.

TRY/EXCEPT

Robot Framework 5.0 introduced native TRY/EXCEPT syntax that can be used for handling failures:

*** Test Cases ***
Example
    TRY
        Some Keyword
    EXCEPT    Expected error message
        Error Handler Keyword
    END

For more details see the separate TRY/EXCEPT syntax section.

BuiltIn keywords

There are several BuiltIn keywords that can be used to execute other keywords so that execution can continue after possible failures:

  • Run Keyword And Expect Error executes a keyword and expects it to fail with the specified error message. The aforementioned TRY/EXCEPT syntax is nowadays generally recommended instead.
  • Run Keyword And Ignore Error executes a keyword and silences possible error. It returns the status along with possible keyword return value or error message. The TRY/EXCEPT syntax generally works better in this case as well.
  • Run Keyword And Warn On Failure is a wrapper for Run Keyword And Ignore Error that automatically logs a warning if the executed keyword fails.
  • Run Keyword And Return Status executes a keyword and returns Boolean True or False depending on did it pass or fail.

3.2.4   Stopping test execution gracefully

Sometimes there is a need to stop the test execution before all the tests have finished, but so that logs and reports are created. Different ways how to accomplish this are explained below. In all these cases the remaining test cases are marked failed.

The tests that are automatically failed get robot:exit tag and the generated report will include NOT robot:exit combined tag pattern to easily see those tests that were not skipped. Note that the test in which the exit happened does not get the robot:exit tag.

Note

Prior to Robot Framework 3.1, the special tag was named robot-exit.

Pressing Ctrl-C

The execution is stopped when Ctrl-C is pressed in the console where the tests are running. The execution is stopped immediately, but reports and logs are still generated.

If Ctrl-C is pressed again, the execution ends immediately and reports and logs are not created.

Using signals

On UNIX-like machines it is possible to terminate test execution using signals INT and TERM. These signals can be sent from the command line using kill command, and sending signals can also be easily automated.

Using keywords

The execution can be stopped also by the executed keywords. There is a separate Fatal Error BuiltIn keyword for this purpose, and custom keywords can use fatal exceptions when they fail.

Stopping when first test case fails

If option --exitonfailure (-X) is used, test execution stops immediately if any test fails. The remaining tests are marked as failed without actually executing them.

Stopping on parsing or execution error

Robot Framework separates failures caused by failing keywords from errors caused by, for example, invalid settings or failed test library imports. By default these errors are reported as test execution errors, but errors themselves do not fail tests or affect execution otherwise. If --exitonerror option is used, however, all such errors are considered fatal and execution stopped so that remaining tests are marked failed. With parsing errors encountered before execution even starts, this means that no tests are actually run.

Handling teardowns

By default teardowns of the tests and suites that have been started are executed even if the test execution is stopped using one of the methods above. This allows clean-up activities to be run regardless how execution ends.

It is also possible to skip teardowns when execution is stopped by using --skipteardownonexit option. This can be useful if, for example, clean-up tasks take a lot of time.

3.3   Task execution

Robot Framework can be used also for other automation purposes than test automation, and starting from Robot Framework 3.1 it is possible to explicitly create and execute tasks. For most parts task execution and test execution work the same way, and this section explains the differences.

3.3.1   Generic automation mode

When Robot Framework is used execute a file and it notices that the file has tasks, not tests, it automatically sets itself into the generic automation mode. This mode does not change the actual execution at all, but when logs and reports are created, they use term task, not test. They have, for example, headers like Task Log and Task Statistics instead of Test Log and Test Statistics.

The generic automation mode can also be enabled by using the --rpa option. In that case the executed files can have either tests or tasks. Alternatively --norpa can be used to force the test automation mode even if executed files contain tasks. If neither of these options are used, it is an error to execute multiple files so that some have tests and others have tasks.

The execution mode is stored in the generated output file and read by Rebot if outputs are post-processed. The mode can also be set when using Rebot if necessary.

3.4   Post-processing outputs

XML output files that are generated during the test execution can be post-processed afterwards by the Rebot tool, which is an integral part of Robot Framework. It is used automatically when test reports and logs are generated during the test execution, and using it separately allows creating custom reports and logs as well as combining and merging results.

3.4.1   Using Rebot

Synopsis

rebot [options] outputs
python -m robot.rebot [options] outputs
python path/to/robot/rebot.py [options] outputs

The most common way to use Rebot is using the rebot command. Alternatively it is possible to execute the installed robot.rebot module or the robot/rebot.py file using the selected Python interpreter.

Specifying options and arguments

The basic syntax for using Rebot is exactly the same as when starting test execution and also most of the command line options are identical. The main difference is that arguments to Rebot are XML output files instead of test data files or directories.

Return codes with Rebot

Return codes from Rebot are exactly same as when running tests.

Controlling execution mode

Rebot notices have tests or tasks been run, and by default preserves the execution mode. The mode affects logs and reports so that in the former case they will use term test like Test Log and Test Statistics, and in the latter case term task like Task Log and Task Statistics.

Rebot also supports using --rpa or --norpa options to set the execution mode explicitly. This is necessary if multiple output files are processed and they have conflicting modes.

3.4.2   Creating reports, logs and output files

You can use Rebot for creating the same reports and logs that are created automatically during the test execution. Of course, it is not sensible to create the exactly same files, but, for example, having one report with all test cases and another with only some subset of tests can be useful:

rebot output.xml
rebot path/to/output_file.xml
rebot --include smoke --name Smoke_Tests c:\results\output.xml

Another common usage is creating only the output file when running tests (log and report generation can be disabled with --log NONE --report NONE) and generating logs and reports later. Tests can, for example, be executed on different environments, output files collected to a central place, and reports and logs created there.

Rebot does not create XML output files by default, but it is possible to create them by using the --output (-o) option. Log and report are created by default, but they can be disabled by using value NONE (case-insensitive) if they are not needed:

rebot --include smoke --output smoke.xml --log none --report none original.xml

3.4.3   Combining outputs

An important feature in Rebot is its ability to combine outputs from different test execution rounds. This capability allows, for example, running the same test cases on different environments and generating an overall report from all outputs. Combining outputs is extremely easy, all that needs to be done is giving several output files as arguments:

rebot output1.xml output2.xml
rebot outputs/*.xml

When outputs are combined, a new top-level test suite is created so that test suites in the given output files are its child suites. This works the same way when multiple test data files or directories are executed, and also in this case the name of the top-level test suite is created by joining child suite names with an ampersand (&) and spaces. These automatically generated names are not that good, and it is often a good idea to use --name to give a more meaningful name:

rebot --name Browser_Compatibility firefox.xml opera.xml safari.xml ie.xml
rebot --include smoke --name Smoke_Tests c:\results\*.xml

3.4.4   Merging outputs

If same tests are re-executed or a single test suite executed in pieces, combining results like discussed above creates an unnecessary top-level test suite. In these cases it is typically better to merge results instead. Merging is done by using --merge (-R) option which changes the way how Rebot combines two or more output files. This option itself takes no arguments and all other command line options can be used with it normally:

rebot --merge original.xml merged.xml
rebot --merge --name Example first.xml second.xml third.xml

When suites are merged, documentation, suite setup and suite teardown are got from the last merged suite. Suite metadata from all merged suites is preserved so that values in latter suites have precedence.

How merging tests works is explained in the following sections discussing the two main merge use cases.

Note

Getting suite documentation and metadata from merged suites is new in Robot Framework 6.0.

Merging re-executed tests

There is often a need to re-execute a subset of tests, for example, after fixing a bug in the system under test or in the tests themselves. This can be accomplished by selecting test cases by names (--test and --suite options), tags (--include and --exclude), or by previous status (--rerunfailed or --rerunfailedsuites).

Combining re-execution results with the original results using the default combining outputs approach does not work too well. The main problem is that you get separate test suites and possibly already fixed failures are also shown. In this situation it is better to use --merge (-R) option to tell Rebot to merge the results instead. In practice this means that tests from the latter test runs replace tests in the original. An exception to this rule is that skipped tests in latter runs are ignored and original tests preserved.

This usage is best illustrated by a practical example using --rerunfailed and --merge together:

robot --output original.xml tests                          # first execute all tests
robot --rerunfailed original.xml --output rerun.xml tests  # then re-execute failing
rebot --merge original.xml rerun.xml                       # finally merge results

The message of the merged tests contains a note that results have been replaced. The message also shows the old status and message of the test.

Merged results must always have same top-level test suite. Tests and suites in merged outputs that are not found from the original output are added into the resulting output. How this works in practice is discussed in the next section.

Note

Ignoring skipped tests in latter runs is new in Robot Framework 4.1.

Merging suites executed in pieces

Another important use case for the --merge option is merging results got when running a test suite in pieces using, for example, --include and --exclude options:

robot --include smoke --output smoke.xml tests   # first run some tests
robot --exclude smoke --output others.xml tests  # then run others
rebot --merge smoke.xml others.xml               # finally merge results

When merging outputs like this, the resulting output contains all tests and suites found from all given output files. If some test is found from multiple outputs, latest results replace the earlier ones like explained in the previous section. Also this merging strategy requires the top-level test suites to be same in all outputs.

3.4.5   JSON output files

Rebot can create and process output files also in the JSON format. Creating JSON output files is done using the normal --output option so that the specified file has a .json extension:

rebot --output output.json output.xml

When reading output files, JSON files are automatically recognized by the extension:

rebot output.json
rebot output1.json output2.json

When combining or merging results, it is possible to mix JSON and XML files:

rebot output1.xml output2.json
rebot --merge original.xml rerun.json

The JSON output file structure is documented in the result.json schema file.

Note

Support for JSON output files is new in Robot Framework 7.0.

3.5   Configuring execution

This section explains different command line options that can be used for configuring the test execution or post-processing outputs. Options related to generated output files are discussed in the next section.

3.5.1   Selecting files to parse

Executing individual files

When executing individual files, Robot Framework tries to parse and run them regardless the name or the file extension. What parser to use depends on the extension:

Examples:

robot example.robot    # Standard Robot Framework parser.
robot example.tsv      # Must be compatible with the standard parser.
robot example.rst      # reStructuredText parser.
robot x.robot y.rst    # Parse both files using an appropriate parser.

Included and excluded files

When executing a directory, files and directories are parsed using the following rules:

  • All files and directories starting with a dot (.) or an underscore (_) are ignored.
  • .robot files are parsed using the normal Robot Framework parser.
  • .robot.rst files are parsed using the reStructuredText parser.
  • .rbt files are parsed using the JSON parser.
  • Files supported by custom parsers are parsed by a matching parser.
  • Other files are ignored unless parsing them has been enabled by using the --parseinclude or --extension options discussed in the subsequent sections.

Selecting files by name or path

When executing a directory, it is possible to parse only certain files based on their name or path by using the --parseinclude (-I) option. This option has slightly different semantics depending on the value it is used with:

  • If the value is just a file name like example.robot, files matching the name in all directories will be parsed.
  • To match only a certain file in a certain directory, files can be given as relative or absolute paths like path/to/tests.robot.
  • If the value is a path to a directory, all files inside that directory are parsed, recursively.

Examples:

robot --parseinclude example.robot tests       # Parse `example.robot` files anywhere under `tests`.
robot -I example_*.robot -I ???.robot tests    # Parse files matching `example_*.robot` or `???.robot` under `tests`.
robot -I tests/example.robot tests             # Parse only `tests/example.robot`.
robot --parseinclude tests/example tests       # Parse files under `tests/example` directory, recursively.

Values used with --parseinclude are case-insensitive and support glob patterns like example_*.robot. There are, however, two small differences compared to how patterns typically work with Robot Framework:

  • * matches only a single path segment. For example, path/*/tests.robot matches path/to/tests.robot but not path/to/nested/tests.robot.
  • ** can be used to enable recursive matching. For example, path/**/tests.robot matches both path/to/tests.robot and path/to/nested/tests.robot.

If the pattern contains an extension, files with that extension are parsed even if they by default would not be. What parser to use depends on the used extension:

Notice that when you use a pattern like *.robot and there exists a file that matches the pattern in the execution directory, the shell may resolve the pattern before Robot Framework is called and the value passed to it is the file name, not the original pattern. In such cases you need to quote or escape the pattern like '*.robot' or \*.robot.

Note

--parseinclude is new in Robot Framework 6.1.

Selecting files by extension

In addition to using the --parseinclude option discussed in the previous section, it is also possible to enable parsing files that are not parsed by default by using the --extension (-F) option. Matching extensions is case insensitive and the leading dot can be omitted. If there is a need to parse more than one kind of files, it is possible to use a colon : to separate extensions:

robot --extension rst path/to/tests    # Parse only *.rst files.
robot -F robot:rst path/to/tests       # Parse *.robot and *.rst files.

The above is equivalent to the following --parseinclude usage:

robot --parseinclude *.rst path/to/tests
robot -I *.robot -I *.rst path/to/tests

Because the --parseinclude option is more powerful and covers all same use cases as the --extension option, the latter is likely to be deprecated in the future. Users are recommended to use --parseinclude already now.

Using custom parsers

External parsers can parse files that Robot Framework does not recognize otherwise. For more information about creating and using such parsers see the Parser interface section.

3.5.2   Selecting test cases

Robot Framework offers several command line options for selecting which test cases to execute. The same options work also when executing tasks and when post-processing outputs with Rebot.

By test names

The easiest way to select only some tests to be run is using the --test (-t) option. As the name implies, it can be used for selecting tests by their names. Given names are case, space and underscore insensitive and they also support simple patterns. The option can be used multiple times to match multiple tests:

--test Example                   # Match only tests with name 'Example'.
--test example*                  # Match tests starting with 'example'.
--test first --test second       # Match tests with name 'first' or 'second'.

To pinpoint a test more precisely, it is possible to prefix the test name with a suite name:

--test mysuite.mytest            # Match test 'mytest' in suite 'mysuite'.
--test root.sub.test             # Match test 'test' in suite 'sub' in suite 'root'.
--test *.sub.test                # Match test 'test' in suite 'sub' anywhere.

Notice that when the given name includes a suite name, it must match the whole suite name starting from the root suite. Using a wildcard as in the last example above allows matching tests with a parent suite anywhere.

Using the --test option is convenient when only a few tests needs to be selected. A common use case is running just the test that is currently being worked on. If a bigger number of tests needs to be selected, it is typically easier to select them by suite names or by tag names.

When executing tasks, it is possible to use the --task option as an alias for --test.

By suite names

Tests can be selected also by suite names with the --suite (-s) option that selects all tests in matching suites. Similarly as with --test, given names are case, space and underscore insensitive and support simple patterns. To pinpoint a suite more precisely, it is possible to prefix the name with the parent suite name:

--suite Example                  # Match only suites with name 'Example'.
--suite example*                 # Match suites starting with 'example'.
--suite first --suite second     # Match suites with name 'first' or 'second'.
--suite root.child               # Match suite 'child' in root suite 'root'.
--suite *.parent.child           # Match suite 'child' with parent 'parent' anywhere.

If the name contains a parent suite name, it must match the whole suite name the same way as with --test. Using a wildcard as in the last example above allows matching suites with a parent suite anywhere.

Note

Prior to Robot Framework 7.0, --suite with a parent suite did not need to match the whole suite name. For example, parent.child would match suite child with parent parent anywhere. The name must be prefixed with a wildcard if this behavior is desired nowadays.

If both --suite and --test options are used, only the specified tests in specified suites are selected:

--suite mysuite --test mytest    # Match test 'mytest' if its inside suite 'mysuite'.

Using the --suite option is more or less the same as executing the appropriate suite file or directory directly. The main difference is that if a file or directory is run directly, possible suite setups and teardowns on higher level are not executed:

# Root suite is 'Tests' and its possible setup and teardown are run.
robot --suite example path/to/tests

# Root suite is 'Example' and possible higher level setups and teardowns are ignored.
robot path/to/tests/example.robot

Prior to Robot Framework 6.1, files not matching the --suite option were not parsed at all for performance reasons. This optimization was not possible anymore after suites got a new Name setting that can override the default suite name that is got from the file or directory name. New --parseinclude option has been added to explicitly select which files are parsed if this kind of parsing optimization is needed.

By tag names

It is possible to include and exclude test cases by tag names with the --include (-i) and --exclude (-e) options, respectively. If the --include option is used, only test cases having a matching tag are selected, and with the --exclude option test cases having a matching tag are not. If both are used, only tests with a tag matching the former option, and not with a tag matching the latter, are selected:

--include example
--exclude not_ready
--include regression --exclude long_lasting

Both --include and --exclude can be used several times to match multiple tags. In that case a test is selected if it has a tag that matches any included tags, and also has no tag that matches any excluded tags.

In addition to specifying a tag to match fully, it is possible to use tag patterns where * and ? are wildcards and AND, OR, and NOT operators can be used for combining individual tags or patterns together:

--include feature-4?
--exclude bug*
--include fooANDbar
--exclude xxORyyORzz
--include fooNOTbar

Starting from RF 5.0, it is also possible to use the reserved tag robot:exclude to achieve the same effect as with using the --exclude option:

*** Test Cases ***
Example
   [Tags]    robot:exclude
   Fail      This is not executed

Selecting test cases by tags is a very flexible mechanism and allows many interesting possibilities:

  • A subset of tests to be executed before other tests, often called smoke tests, can be tagged with smoke and executed with --include smoke.
  • Unfinished test can be committed to version control with a tag such as not_ready and excluded from the test execution with --exclude not_ready.
  • Tests can be tagged with sprint-<num>, where <num> specifies the number of the current sprint, and after executing all test cases, a separate report containing only the tests for a certain sprint can be generated (for example, rebot --include sprint-42 output.xml).

Options --include and --exclude can be used in combination with --suite and --test discussed in the previous section. In that case tests that are selected must match all selection criteria:

--suite example --include tag    # Match test if it is in suite 'example' and has tag 'tag'.
--suite example --exclude tag    # Match test if it is in suite 'example' and does not have tag 'tag'.
--test ex* --include tag         # Match test if its name starts with 'ex' and it has tag 'tag'.
--test ex* --exclude tag         # Match test if its name starts with 'ex' and it does not have tag 'tag'.

Note

In Robot Framework 7.0 --include and --test were cumulative and selected tests needed to match only either of these options. That behavior caused backwards incompatibility problems and it was changed back to the original already in Robot Framework 7.0.1.

Re-executing failed test cases

Command line option --rerunfailed (-R) can be used to select all failed tests from an earlier output file for re-execution. This option is useful, for example, if running all tests takes a lot of time and one wants to iteratively fix failing test cases.

robot tests                             # first execute all tests
robot --rerunfailed output.xml tests    # then re-execute failing

Behind the scenes this option selects the failed tests as they would have been selected individually using the --test option. It is possible to further fine-tune the list of selected tests by using --test, --suite, --include and --exclude options.

It is an error if the output contains no failed tests, but this behavior can be changed by using the --runemptysuite option discussed below. Using an output not originating from executing the same tests that are run now causes undefined results. Using a special value NONE as the output is same as not specifying this option at all.

Tip

Re-execution results and original results can be merged together using the --merge command line option.

Re-executing failed test suites

Command line option --rerunfailedsuites (-S) can be used to select all failed suites from an earlier output file for re-execution. Like --rerunfailed (-R), this option is useful when full test execution takes a lot of time. Note that all tests from a failed test suite will be re-executed, even passing ones. This option is useful when the tests in a test suite depends on each other.

Behind the scenes this option selects the failed suites as they would have been selected individually with the --suite option. It is possible to further fine-tune the list of selected tests by using --test, --suite, --include and --exclude options.

When no tests match selection

By default when no tests match the selection criteria test execution fails with an error like:

[ ERROR ] Suite 'Example' contains no tests matching tag 'xxx'.

Because no outputs are generated, this behavior can be problematic if tests are executed and results processed automatically. Luckily a command line option --RunEmptySuite (case-insensitive) can be used to force the suite to be executed also in this case. As a result normal outputs are created but show zero executed tests. The same option can be used also to alter the behavior when an empty directory or a test case file containing no tests is executed.

Similar situation can occur also when processing output files with Rebot. It is possible that no test match the used filtering criteria or that the output file contained no tests to begin with. By default executing Rebot fails in these cases, but it has a separate --ProcessEmptySuite option that can be used to alter the behavior. In practice this option works the same way as --RunEmptySuite when running tests.

Note

Using --RunEmptySuite with --ReRunFailed or --ReRunFailedSuites requires Robot Framework 5.0.1 or newer.

3.5.3   Setting metadata

Setting suite name

When Robot Framework parses test data, suite names are created from file and directory names. The name of the top-level test suite can, however, be overridden with the command line option --name (-N):

robot --name "Custom name" tests.robot

Setting suite documentation

In addition to defining documentation in the test data, documentation of the top-level suite can be given from the command line with the option --doc (-D). The value can contain simple HTML formatting and must be quoted if it contains spaces.

If the given documentation is a relative or absolute path pointing to an existing file, the actual documentation will be read from that file. This is especially convenient if the externally specified documentation is long or contains multiple lines.

Examples:

robot --doc "Example documentation" tests.robot
robot --doc doc.txt tests.robot    # Documentation read from doc.txt if it exits.

Note

Reading documentation from an external file is new in Robot Framework 4.1.

Prior to Robot Framework 3.1, underscores in documentation were converted to spaces same way as with the --name option.

Setting free suite metadata

Free suite metadata may also be given from the command line with the option --metadata (-M). The argument must be in the format name:value, where name the name of the metadata to set and value is its value. The value can contain simple HTML formatting and the whole argument must be quoted if it contains spaces. This option may be used several times to set multiple metadata values.

If the given value is a relative or absolute path pointing to an existing file, the actual value will be read from that file. This is especially convenient if the value is long or contains multiple lines. If the value should be a path to an existing file, not read from that file, the value must be separated with a space from the name: part.

Examples:

robot --metadata Name:Value tests.robot
robot --metadata "Another Name:Another value, now with spaces" tests.robot
robot --metadata "Read From File:meta.txt" tests.robot    # Value read from meta.txt if it exists.
robot --metadata "Path As Value: meta.txt" tests.robot    # Value always used as-is.

Note

Reading metadata value from an external file is new in Robot Framework 4.1.

Prior to Robot Framework 3.1, underscores in the value were converted to spaces same way as with the --name option.

Setting test tags

The command line option --settag (-G) can be used to set the given tag to all executed test cases. This option may be used several times to set multiple tags.

3.5.4   Configuring where to search libraries and other extensions

When Robot Framework imports a test library, listener, or some other Python based extension, it uses the Python interpreter to import the module containing the extension from the system. The list of locations where modules are looked for is called the module search path, and its contents can be configured using different approaches explained in this section.

Robot Framework uses Python's module search path also when importing resource and variable files if the specified path does not match any file directly.

The module search path being set correctly so that libraries and other extensions are found is a requirement for successful test execution. If you need to customize it using approaches explained below, it is often a good idea to create a custom start-up script.

Locations automatically in module search path

Python interpreters have their own standard library as well as a directory where third party modules are installed automatically in the module search path. This means that test libraries packaged using Python's own packaging system are automatically installed so that they can be imported without any additional configuration.

PYTHONPATH

Python reads additional locations to be added to the module search path from PYTHONPATH environment variables. If you want to specify more than one location in any of them, you need to separate the locations with a colon on UNIX-like machines (e.g. /opt/libs:$HOME/testlibs) and with a semicolon on Windows (e.g. D:\libs;%HOMEPATH%\testlibs).

Environment variables can be configured permanently system wide or so that they affect only a certain user. Alternatively they can be set temporarily before running a command, something that works extremely well in custom start-up scripts.

Using --pythonpath option

Robot Framework has a separate command line option --pythonpath (-P) for adding locations to the module search path.

Multiple locations can be given by separating them with a colon (:) or a semicolon (;) or by using this option multiple times. If the value contains both colons and semicolons, it is split from semicolons. Paths can also be glob patterns matching multiple paths, but they typically need to be escaped when used on the console.

Examples:

--pythonpath libs
--pythonpath /opt/testlibs:mylibs.zip:yourlibs
--pythonpath /opt/testlibs --pythonpath mylibs.zip --pythonpath yourlibs
--pythonpath c:\temp;d:\resources
--pythonpath  lib/\*.zip    # '*' is escaped

Note

Both colon and semicolon work regardless the operating system. Using semicolon is new in Robot Framework 5.0.

Configuring sys.path programmatically

Python interpreters store the module search path they use as a list of strings in sys.path attribute. This list can be updated dynamically during execution, and changes are taken into account next time when something is imported.

3.5.5   Setting variables

Variables can be set from the command line either individually using the --variable (-v) option or through variable files with the --variablefile (-V) option. Variables and variable files are explained in separate chapters, but the following examples illustrate how to use these options:

--variable name:value
--variable OS:Linux --variable IP:10.0.0.42
--variablefile path/to/variables.py
--variablefile myvars.py:possible:arguments:here
--variable ENVIRONMENT:Windows --variablefile c:\resources\windows.py

3.5.6   Dry run

Robot Framework supports so called dry run mode where the tests are run normally otherwise, but the keywords coming from the test libraries are not executed at all. The dry run mode can be used to validate the test data; if the dry run passes, the data should be syntactically correct. This mode is triggered using option --dryrun.

The dry run execution may fail for following reasons:

  • Using keywords that are not found.
  • Using keywords with wrong number of arguments.
  • Using user keywords that have invalid syntax.

In addition to these failures, normal execution errors are shown, for example, when test library or resource file imports cannot be resolved.

It is possible to disable dry run validation of specific user keywords by adding a special robot:no-dry-run keyword tag to them. This is useful if a keyword fails in the dry run mode for some reason, but work fine when executed normally.

Note

The dry run mode does not validate variables.

3.5.7   Randomizing execution order

The test execution order can be randomized using option --randomize <what>[:<seed>], where <what> is one of the following:

tests
Test cases inside each test suite are executed in random order.
suites
All test suites are executed in a random order, but test cases inside suites are run in the order they are defined.
all
Both test cases and test suites are executed in a random order.
none
Neither execution order of test nor suites is randomized. This value can be used to override the earlier value set with --randomize.

It is possible to give a custom seed to initialize the random generator. This is useful if you want to re-run tests using the same order as earlier. The seed is given as part of the value for --randomize in format <what>:<seed> and it must be an integer. If no seed is given, it is generated randomly. The executed top level test suite automatically gets metadata named Randomized that tells both what was randomized and what seed was used.

Examples:

robot --randomize tests my_test.robot
robot --randomize all:12345 path/to/tests

3.5.8   Programmatic modification of test data

If the provided built-in features to modify test data before execution are not enough, Robot Framework makes it possible to do custom modifications programmatically. This is accomplished by creating a so called pre-run modifier and activating it using the --prerunmodifier option.

Pre-run modifiers should be implemented as visitors that can traverse through the executable test suite structure and modify it as needed. The visitor interface is explained as part of the Robot Framework API documentation, and it possible to modify executed test suites, test cases and keywords using it. The examples below ought to give an idea of how pre-run modifiers can be used and how powerful this functionality is.

When a pre-run modifier is taken into use on the command line using the --prerunmodifier option, it can be specified either as a name of the modifier class or a path to the modifier file. If the modifier is given as a class name, the module containing the class must be in the module search path, and if the module name is different than the class name, the given name must include both like module.ModifierClass. If the modifier is given as a path, the class name must be same as the file name. For most parts this works exactly like when importing a test library.

If a modifier requires arguments, like the examples below do, they can be specified after the modifier name or path using either a colon (:) or a semicolon (;) as a separator. If both are used in the value, the one used first is considered to be the actual separator. Starting from Robot Framework 4.0, arguments also support the named argument syntax as well as argument conversion based on type hints and default values the same way as keywords do.

If more than one pre-run modifier is needed, they can be specified by using the --prerunmodifier option multiple times. If similar modifying is needed before creating logs and reports, programmatic modification of results can be enabled using the --prerebotmodifier option.

Pre-run modifiers are executed before other configuration affecting the executed test suite and test cases. Most importantly, options related to selecting test cases are processed after modifiers, making it possible to use options like --include also with possible dynamically added tests.

Tip

Modifiers are taken into use from the command line exactly the same way as listeners. See the Registering listeners from command line section for more information and examples.

Example: Select every Xth test

The first example shows how a pre-run modifier can remove tests from the executed test suite structure. In this example only every Xth tests is preserved, and the X is given from the command line along with an optional start index.

"""Pre-run modifier that selects only every Xth test for execution.

Starts from the first test by default. Tests are selected per suite.
"""

from robot.api import SuiteVisitor


class SelectEveryXthTest(SuiteVisitor):

    def __init__(self, x: int, start: int = 0):
        self.x = x
        self.start = start

    def start_suite(self, suite):
        """Modify suite's tests to contain only every Xth."""
        suite.tests = suite.tests[self.start::self.x]

    def end_suite(self, suite):
        """Remove suites that are empty after removing tests."""
        suite.suites = [s for s in suite.suites if s.test_count > 0]

    def visit_test(self, test):
        """Avoid visiting tests and their keywords to save a little time."""
        pass

If the above pre-run modifier is in a file SelectEveryXthTest.py and the file is in the module search path, it could be used like this:

# Specify the modifier as a path. Run every second test.
robot --prerunmodifier path/to/SelectEveryXthTest.py:2 tests.robot

# Specify the modifier as a name. Run every third test, starting from the second.
robot --prerunmodifier SelectEveryXthTest:3:1 tests.robot

Note

Argument conversion based on type hints like x: int in the above example is new in Robot Framework 4.0 and requires Python 3.

Example: Exclude tests by name

Also the second example removes tests, this time based on a given name pattern. In practice it works like a negative version of the built-in --test option.

"""Pre-run modifier that excludes tests by their name.

Tests to exclude are specified by using a pattern that is both case and space
insensitive and supports '*' (match anything) and '?' (match single character)
as wildcards.
"""

from robot.api import SuiteVisitor
from robot.utils import Matcher


class ExcludeTests(SuiteVisitor):

    def __init__(self, pattern):
        self.matcher = Matcher(pattern)

    def start_suite(self, suite):
        """Remove tests that match the given pattern."""
        suite.tests = [t for t in suite.tests if not self._is_excluded(t)]

    def _is_excluded(self, test):
        return self.matcher.match(test.name) or self.matcher.match(test.longname)

    def end_suite(self, suite):
        """Remove suites that are empty after removing tests."""
        suite.suites = [s for s in suite.suites if s.test_count > 0]

    def visit_test(self, test):
        """Avoid visiting tests and their keywords to save a little time."""
        pass

Assuming the above modifier is in a file named ExcludeTests.py, it could be used like this:

# Exclude test named 'Example'.
robot --prerunmodifier path/to/ExcludeTests.py:Example tests.robot

# Exclude all tests ending with 'something'.
robot --prerunmodifier path/to/ExcludeTests.py:*something tests.robot

Example: Disable setups and teardowns

Sometimes when debugging tests it can be useful to disable setups or teardowns. This can be accomplished by editing the test data, but pre-run modifiers make it easy to do that temporarily for a single run:

"""Pre-run modifiers for disabling suite and test setups and teardowns."""

from robot.api import SuiteVisitor


class SuiteSetup(SuiteVisitor):

    def start_suite(self, suite):
        suite.setup = None


class SuiteTeardown(SuiteVisitor):

    def start_suite(self, suite):
        suite.teardown = None


class TestSetup(SuiteVisitor):

    def start_test(self, test):
        test.setup = None


class TestTeardown(SuiteVisitor):

    def start_test(self, test):
        test.teardown = None

Assuming that the above modifiers are all in a file named disable.py and this file is in the module search path, setups and teardowns could be disabled, for example, as follows:

# Disable suite teardowns.
robot --prerunmodifier disable.SuiteTeardown tests.robot

# Disable both test setups and teardowns by using '--prerunmodifier' twice.
robot --prerunmodifier disable.TestSetup --prerunmodifier disable.TestTeardown tests.robot

Note

Prior to Robot Framework 4.0 setup and teardown were accessed via the intermediate keywords attribute and, for example, suite setup was disabled like suite.keywords.setup = None.

3.5.9   Controlling console output

There are various command line options to control how test execution is reported on the console.

Console output type

The overall console output type is set with the --console option. It supports the following case-insensitive values:

verbose
Every test suite and test case is reported individually. This is the default.
dotted
Only show . for passed test, F for failed tests, s for skipped tests and x for tests which are skipped because test execution exit. Failed tests are listed separately after execution. This output type makes it easy to see are there any failures during execution even if there would be a lot of tests.
quiet
No output except for errors and warnings.
none
No output whatsoever. Useful when creating a custom output using, for example, listeners.

Separate convenience options --dotted (-.) and --quiet are shortcuts for --console dotted and --console quiet, respectively.

Examples:

robot --console quiet tests.robot
robot --dotted tests.robot

Console width

The width of the test execution output in the console can be set using the option --consolewidth (-W). The default width is 78 characters.

Tip

On many UNIX-like machines you can use handy $COLUMNS environment variable like --consolewidth $COLUMNS.

Console colors

The --consolecolors (-C) option is used to control whether colors should be used in the console output. Colors are implemented using ANSI escape codes with a backup mechanism for older Windows versions that do not support ANSI codes.

This option supports the following case-insensitive values:

auto
Colors are enabled when outputs are written into the console, but not when they are redirected into a file or elsewhere. This is the default.
on
Colors are used also when outputs are redirected. Does not work on Windows.
ansi
Same as on but forces ANSI codes to be used unconditionally on Windows.
off
Colors are disabled.

Note

Using ANSI codes on Windows by default is new in Robot Framework 7.1.

Console markers

Special markers . (success) and F (failure) are shown on the console when using the verbose output and top level keywords in test cases end. The markers allow following the test execution in high level, and they are erased when test cases end.

It is possible to configure when markers are used with --consolemarkers (-K) option. It supports the following case-insensitive values:

auto
Markers are enabled when the standard output is written into the console, but not when it is redirected into a file or elsewhere. This is the default.
on
Markers are always used.
off
Markers are disabled.

3.5.10   Setting listeners

Listeners can be used to monitor the test execution. When they are taken into use from the command line, they are specified using the --listener command line option. The value can either be a path to a listener or a listener name. See the Listener interface section for more details about importing listeners and using them in general.

3.6   Output files

Several output files are created when tests are executed, and all of them are somehow related to test results. This section discusses what outputs are created, how to configure where they are created, and how to fine-tune their contents.

3.6.1   Different output files

This section explains what different output files can be created and how to configure where they are created. Output files are configured using command line options, which get the path to the output file in question as an argument. A special value NONE (case-insensitive) can be used to disable creating a certain output file.

Output directory

All output files can be set using an absolute path, in which case they are created to the specified place, but in other cases, the path is considered relative to the output directory. The default output directory is the directory where the execution is started from, but it can be altered with the --outputdir (-d) option. The path set with this option is, again, relative to the execution directory, but can naturally be given also as an absolute path. Regardless of how a path to an individual output file is obtained, its parent directory is created automatically, if it does not exist already.

Output file

Output files contain all the test execution results in machine readable XML format. Log, report and xUnit files are typically generated based on them, and they can also be combined and otherwise post-processed with Rebot.

Tip

Generating report and xUnit files as part of test execution does not require processing output files after execution. Disabling log generation when running tests can thus save memory.

The command line option --output (-o) determines the path where the output file is created relative to the output directory. The default name for the output file, when tests are run, is output.xml.

When post-processing outputs with Rebot, new output files are not created unless the --output option is explicitly used.

It is possible to disable creation of the output file when running tests by giving a special value NONE to the --output option. If no outputs are needed, they should all be explicitly disabled using --output NONE --report NONE --log NONE.

The XML output file structure is documented in the robot.xsd schema file.

Note

Starting from Robot Framework 7.0, Rebot can read and write JSON output files. The plan is to enhance the support for JSON output files in the future so that they could be created already during execution. For more details see issue #3423.

Legacy output file format

There were some backwards incompatible changes to the output file format in Robot Framework 7.0. To make it possible to use new Robot Framework versions with external tools that are not yet updated to support the new format, there is a --legacyoutput option that produces output files that are compatible with Robot Framework 6.x and earlier. Robot Framework itself can process output files both in the old and in the new formats.

We hope that external tools are updated soon, but we plan to support this option at least until Robot Framework 8.0. If you encounter tools that are not compatible, please inform the tool developers about changes.

Log file

Log files contain details about the executed test cases in HTML format. They have a hierarchical structure showing test suite, test case and keyword details. Log files are needed nearly every time when test results are to be investigated in detail. Even though log files also have statistics, reports are better for getting an higher-level overview.

The command line option --log (-l) determines where log files are created. Unless the special value NONE is used, log files are always created and their default name is log.html.

src/ExecutingTestCases/log_passed.png

An example of beginning of a log file

src/ExecutingTestCases/log_failed.png

An example of a log file with keyword details visible

src/ExecutingTestCases/log_skipped.png

An example of a log file with skipped and passed tests

Report file

Report files contain an overview of the test execution results in HTML format. They have statistics based on tags and executed test suites, as well as a list of all executed test cases. When both reports and logs are generated, the report has links to the log file for easy navigation to more detailed information. It is easy to see the overall test execution status from report, because its background color is green, if all tests pass and bright red if any test fails. Background can also be yellow, which means that all tests were skipped.

The command line option --report (-r) determines where report files are created. Similarly as log files, reports are always created unless NONE is used as a value, and their default name is report.html.

src/ExecutingTestCases/report_passed.png

An example report file of successful test execution

src/ExecutingTestCases/report_failed.png

An example report file of failed test execution

XUnit compatible result file

XUnit result files contain the test execution summary in xUnit compatible XML format. These files can thus be used as an input for external tools that understand xUnit reports. For example, Jenkins continuous integration server supports generating statistics based on xUnit compatible results.

Tip

Jenkins also has a separate Robot Framework plugin.

XUnit output files are not created unless the command line option --xunit (-x) is used explicitly. This option requires a path to the generated xUnit file, relatively to the output directory, as a value.

XUnit output files were changed pretty heavily in Robot Framework 5.0. They nowadays contain separate <testsuite> elements for each suite, <testsuite> elements have timestamp attribute, and suite documentation and metadata is stored as <property> elements.

Debug file

Debug files are plain text files that are written during the test execution. All messages got from test libraries are written to them, as well as information about started and ended test suites, test cases and keywords. Debug files can be used for monitoring the test execution. This can be done using, for example, a separate fileviewer.py tool, or in UNIX-like systems, simply with the tail -f command.

Debug files are not created unless the command line option --debugfile (-b) is used explicitly.

Timestamping output files

All output files generated by Robot Framework itself can be automatically timestamped with the option --timestampoutputs (-T). When this option is used, a timestamp in the format YYYYMMDD-hhmmss is placed between the extension and the base name of each file. The example below would, for example, create output files like output-20080604-163225.xml and mylog-20080604-163225.html:

robot --timestampoutputs --log mylog.html --report NONE tests.robot

Setting titles

The default titles for logs and reports are generated by prefixing the name of the top-level test suite with Test Log or Test Report. Custom titles can be given from the command line using the options --logtitle and --reporttitle, respectively.

Example:

robot --logtitle "Smoke Test Log" --reporttitle "Smoke Test Report" --include smoke my_tests/

Note

Prior to Robot Framework 3.1, underscores in the given titles were converted to spaces. Nowadays spaces need to be escaped or quoted like in the example above.

Setting background colors

By default the report file has red background if there are failures, green background if there are passed tests and possibly some skipped ones, and a yellow background if all tests are skipped or no tests have been run. These colors can be customized by using the --reportbackground command line option, which takes two or three colors separated with a colon as an argument:

--reportbackground blue:red
--reportbackground blue:red:orange
--reportbackground #00E:#E00

If you specify two colors, the first one will be used instead of the default green (pass) color and the second instead of the default red (fail). This allows, for example, using blue instead of green to make backgrounds easier to separate for color blind people.

If you specify three colors, the first two have same semantics as earlier and the last one replaces the default yellow (skip) color.

The specified colors are used as a value for the body element's background CSS property. The value is used as-is and can be a HTML color name (e.g. red), a hexadecimal value (e.g. #f00 or #ff0000), or an RGB value (e.g. rgb(255,0,0)). The default green, red and yellow colors are specified using hexadecimal values #9e9, #f66 and #fed84f, respectively.

3.6.2   Log levels

Available log levels

Messages in log files can have different log levels. Some of the messages are written by Robot Framework itself, but also executed keywords can log information using different levels. The available log levels are:

FAIL
Used when a keyword fails. Can be used only by Robot Framework itself.
WARN
Used to display warnings. They shown also in the console and in the Test Execution Errors section in log files, but they do not affect the test case status.
INFO
The default level for normal messages. By default, messages below this level are not shown in the log file.
DEBUG
Used for debugging purposes. Useful, for example, for logging what libraries are doing internally. When a keyword fails, a traceback showing where in the code the failure occurred is logged using this level automatically.
TRACE
More detailed debugging level. The keyword arguments and return values are automatically logged using this level.

Setting log level

By default, log messages below the INFO level are not logged, but this threshold can be changed from the command line using the --loglevel (-L) option. This option takes any of the available log levels as an argument, and that level becomes the new threshold level. A special value NONE can also be used to disable logging altogether.

It is possible to use the --loglevel option also when post-processing outputs with Rebot. This allows, for example, running tests initially with the TRACE level, and generating smaller log files for normal viewing later with the INFO level. By default all the messages included during execution will be included also with Rebot. Messages ignored during the execution cannot be recovered.

Another possibility to change the log level is using the BuiltIn keyword Set Log Level in the test data. It takes the same arguments as the --loglevel option, and it also returns the old level so that it can be restored later, for example, in a test teardown.

Visible log level

If the log file contains messages at DEBUG or TRACE levels, a visible log level drop down is shown in the upper right corner. This allows users to remove messages below chosen level from the view. This can be useful especially when running test at TRACE level.

src/ExecutingTestCases/visible_log_level.png

An example log showing the visible log level drop down

By default the drop down will be set at the lowest level in the log file, so that all messages are shown. The default visible log level can be changed using --loglevel option by giving the default after the normal log level separated by a colon:

--loglevel DEBUG:INFO

In the above example, tests are run using level DEBUG, but the default visible level in the log file is INFO.

3.6.3   Splitting logs

Normally the log file is just a single HTML file. When the amount of the test cases increases, the size of the file can grow so large that opening it into a browser is inconvenient or even impossible. Hence, it is possible to use the --splitlog option to split parts of the log into external files that are loaded transparently into the browser when needed.

The main benefit of splitting logs is that individual log parts are so small that opening and browsing the log file is possible even if the amount of the test data is very large. A small drawback is that the overall size taken by the log file increases.

Technically the test data related to each test case is saved into a JavaScript file in the same folder as the main log file. These files have names such as log-42.js where log is the base name of the main log file and 42 is an incremented index.

Note

When copying the log files, you need to copy also all the log-*.js files or some information will be missing.

3.6.4   Configuring statistics

There are several command line options that can be used to configure and adjust the contents of the Statistics by Tag, Statistics by Suite and Test Details by Tag tables in different output files. All these options work both when executing test cases and when post-processing outputs.

Configuring displayed suite statistics

When a deeper suite structure is executed, showing all the test suite levels in the Statistics by Suite table may make the table somewhat difficult to read. By default all suites are shown, but you can control this with the command line option --suitestatlevel which takes the level of suites to show as an argument:

--suitestatlevel 3

Including and excluding tag statistics

When many tags are used, the Statistics by Tag table can become quite congested. If this happens, the command line options --tagstatinclude and --tagstatexclude can be used to select which tags to display, similarly as --include and --exclude are used to select test cases:

--tagstatinclude some-tag --tagstatinclude another-tag
--tagstatexclude owner-*
--tagstatinclude prefix-* --tagstatexclude prefix-13

Generating combined tag statistics

The command line option --tagstatcombine can be used to generate aggregate tags that combine statistics from multiple tags. The combined tags are specified using tag patterns where * and ? are supported as wildcards and AND, OR and NOT operators can be used for combining individual tags or patterns together.

The following examples illustrate creating combined tag statistics using different patterns, and the figure below shows a snippet of the resulting Statistics by Tag table:

--tagstatcombine owner-*
--tagstatcombine smokeANDmytag
--tagstatcombine smokeNOTowner-janne*
src/ExecutingTestCases/tagstatcombine.png

Examples of combined tag statistics

As the above example illustrates, the name of the added combined statistic is, by default, just the given pattern. If this is not good enough, it is possible to give a custom name after the pattern by separating them with a colon (:):

--tagstatcombine "prio1ORprio2:High priority tests"

Note

Prior to Robot Framework 3.1, underscores in the custom name were converted to spaces. Nowadays spaces need to be escaped or quoted like in the example above.

Adding documentation to tags

Tags can be given a documentation with the command line option --tagdoc, which takes an argument in the format tag:doc. tag is the name of the tag to assign the documentation to, and it can also be a simple pattern matching multiple tags. doc is the assigned documentation. It can contain simple HTML formatting.

The given documentation is shown with matching tags in the Test Details by Tag table, and as a tool tip for these tags in the Statistics by Tag table. If one tag gets multiple documentations, they are combined together and separated with an ampersand.

Examples:

--tagdoc mytag:Example
--tagdoc "regression:*See* http://info.html"
--tagdoc "owner-*:Original author"

Note

Prior to Robot Framework 3.1, underscores in the documentation were converted to spaces. Nowadays spaces need to be escaped or quoted like in the examples above.

3.6.5   Removing and flattening keywords

Most of the content of output files comes from keywords and their log messages. When creating higher level reports, log files are not necessarily needed at all, and in that case keywords and their messages just take space unnecessarily. Log files themselves can also grow overly large, especially if they contain FOR loops or other constructs that repeat certain keywords multiple times.

In these situations, command line options --removekeywords and --flattenkeywords can be used to dispose or flatten unnecessary keywords. They can be used both when executing test cases and when post-processing outputs. When used during execution, they only affect the log file, not the XML output file. With rebot they affect both logs and possibly generated new output XML files.

Removing keywords

The --removekeywords option removes keywords and their messages altogether. It has the following modes of operation, and it can be used multiple times to enable multiple modes. Keywords that contain errors or warnings are not removed except when using the ALL mode.

ALL
Remove data from all keywords unconditionally.
PASSED
Remove keyword data from passed test cases. In most cases, log files created using this option contain enough information to investigate possible failures.
FOR
Remove all passed iterations from FOR loops except the last one.
WHILE
Remove all passed iterations from WHILE loops except the last one.
WUKS
Remove all failing keywords inside BuiltIn keyword Wait Until Keyword Succeeds except the last one.
NAME:<pattern>
Remove data from all keywords matching the given pattern regardless the keyword status. The pattern is matched against the full name of the keyword, prefixed with the possible library or resource file name like MyLibrary.Keyword Name. The pattern is case, space, and underscore insensitive, and it supports simple patterns with *, ? and [] as wildcards.
TAG:<pattern>
Remove data from keywords with tags that match the given pattern. Tags are case and space insensitive and they can be specified using tag patterns where *, ? and [] are supported as wildcards and AND, OR and NOT operators can be used for combining individual tags or patterns together. Can be used both with library keyword tags and user keyword tags.

Examples:

rebot --removekeywords all --output removed.xml output.xml
robot --removekeywords passed --removekeywords for tests.robot
robot --removekeywords name:HugeKeyword --removekeywords name:resource.* tests.robot
robot --removekeywords tag:huge tests.robot

Removing keywords is done after parsing the output file and generating an internal model based on it. Thus it does not reduce memory usage as much as flattening keywords.

Flattening keywords

The --flattenkeywords option flattens matching keywords. In practice this means that matching keywords get all log messages from their child keywords, recursively, and child keywords are discarded otherwise. Flattening supports the following modes:

FOR
Flatten FOR loops fully.
WHILE
Flatten WHILE loops fully.
ITERATION
Flatten individual FOR and WHILE loop iterations.
FORITEM
Deprecated alias for ITERATION.
NAME:<pattern>
Flatten keywords matching the given pattern. Pattern matching rules are same as when removing keywords using the NAME:<pattern> mode.
TAG:<pattern>
Flatten keywords with tags matching the given pattern. Pattern matching rules are same as when removing keywords using the TAG:<pattern> mode.

Examples:

robot --flattenkeywords name:HugeKeyword --flattenkeywords name:resource.* tests.robot
rebot --flattenkeywords foritem --output flattened.xml original.xml

Flattening keywords is done already when the output file is parsed initially. This can save a significant amount of memory especially with deeply nested keyword structures.

Flattening keyword during execution time

Starting from Robot Framework 6.1, it is possible to enable the keyword flattening during the execution time. This can be done only on an user keyword level by defining the reserved tag robot:flatten as a keyword tag. Using this tag will work similarly as the command line option described in the previous chapter, e.g. all content except for log messages is removed from under the keyword having the tag. One important difference is that in this case, the removed content is not written to the output file at all, and thus cannot be accessed at later time.

Some examples

*** Keywords ***
Flattening affects this keyword and all it's children
    [Tags]    robot:flatten
    Log    something
    FOR     ${i}     IN RANGE     2
         Log    The message is preserved but for loop iteration is not
    END

*** Settings ***
# Flatten content of all uer keywords
Keyword Tags    robot:flatten

3.6.6   Automatically expanding keywords

Keywords that have passed are closed in the log file by default. Thus information they contain is not visible unless you expand them. If certain keywords have important information that should be visible when the log file is opened, you can use the --expandkeywords option to set keywords automatically expanded in log file similar to failed keywords. Expanding supports the following modes:

NAME:<pattern>
Expand keywords matching the given pattern. Pattern matching rules are same as when removing keywords using the NAME:<pattern> mode.
TAG:<pattern>
Expand keywords with tags matching the given pattern. Pattern matching rules are same as when removing keywords using the TAG:<pattern> mode.

If you need to expand keywords matching different names or patterns, you can use the --expandkeywords multiple times.

Examples:

robot --expandkeywords name:SeleniumLibrary.CapturePageScreenshot tests.robot
rebot --expandkeywords tag:example --expandkeywords tag:another output.xml

Note

The --expandkeywords option is new in Robot Framework 3.2.

3.6.7   Setting start and end time of execution

When combining outputs using Rebot, it is possible to set the start and end time of the combined test suite using the options --starttime and --endtime, respectively. This is convenient, because by default, combined suites do not have these values. When both the start and end time are given, the elapsed time is also calculated based on them. Otherwise the elapsed time is got by adding the elapsed times of the child test suites together.

It is also possible to use the above mentioned options to set start and end times for a single suite when using Rebot. Using these options with a single output always affects the elapsed time of the suite.

Times must be given as timestamps in the format YYYY-MM-DD hh:mm:ss.mil, where all separators are optional and the parts from milliseconds to hours can be omitted. For example, 2008-06-11 17:59:20.495 is equivalent both to 20080611-175920.495 and 20080611175920495, and also mere 20080611 would work.

Examples:

rebot --starttime 20080611-17:59:20.495 output1.xml output2.xml
rebot --starttime 20080611-175920 --endtime 20080611-180242 *.xml
rebot --starttime 20110302-1317 --endtime 20110302-11418 myoutput.xml

3.6.8   Limiting error message length in reports

If a test case fails and has a long error message, the message shown in reports is automatically cut from the middle to keep reports easier to read. By default messages longer than 40 lines are cut, but that can be configured by using the --maxerrorlines command line option. The minimum value for this option is 10, and it is also possible to use a special value NONE to show the full message.

Full error messages are always visible in log files as messages of the failed keywords.

Note

The --maxerrorlines option is new in Robot Framework 3.1.

3.6.9   Programmatic modification of results

If the provided built-in features to modify results are not enough, Robot Framework makes it possible to do custom modifications programmatically. This is accomplished by creating a model modifier and activating it using the --prerebotmodifier option.

This functionality works nearly exactly like programmatic modification of test data that can be enabled with the --prerunmodifier option. The obvious difference is that this time modifiers operate with the result model, not the running model. For example, the following modifier marks all passed tests that have taken more time than allowed as failed:

from robot.api import SuiteVisitor


class ExecutionTimeChecker(SuiteVisitor):

    def __init__(self, max_seconds: float):
        self.max_milliseconds = max_seconds * 1000

    def visit_test(self, test):
        if test.status == 'PASS' and test.elapsedtime > self.max_milliseconds:
            test.status = 'FAIL'
            test.message = 'Test execution took too long.'

If the above modifier would be in file ExecutionTimeChecker.py, it could be used, for example, like this:

# Specify modifier as a path when running tests. Maximum time is 42 seconds.
robot --prerebotmodifier path/to/ExecutionTimeChecker.py:42 tests.robot

# Specify modifier as a name when using Rebot. Maximum time is 3.14 seconds.
# ExecutionTimeChecker.py must be in the module search path.
rebot --prerebotmodifier ExecutionTimeChecker:3.14 output.xml

If more than one model modifier is needed, they can be specified by using the --prerebotmodifier option multiple times. When executing tests, it is possible to use --prerunmodifier and --prerebotmodifier options together.

Note

Argument conversion based on type hints like max_seconds: float in the above example is new in Robot Framework 4.0 and requires Python 3.

3.6.10   System log

Robot Framework has its own plain-text system log where it writes information about

  • Processed and skipped test data files
  • Imported test libraries, resource files and variable files
  • Executed test suites and test cases
  • Created outputs

Normally users never need this information, but it can be useful when investigating problems with test libraries or Robot Framework itself. A system log is not created by default, but it can be enabled by setting the environment variable ROBOT_SYSLOG_FILE so that it contains a path to the selected file.

A system log has the same log levels as a normal log file, with the exception that instead of FAIL it has the ERROR level. The threshold level to use can be altered using the ROBOT_SYSLOG_LEVEL environment variable like shown in the example below. Possible unexpected errors and warnings are written into the system log in addition to the console and the normal log file.

#!/bin/bash

export ROBOT_SYSLOG_FILE=/tmp/syslog.txt
export ROBOT_SYSLOG_LEVEL=DEBUG

robot --name Syslog_example path/to/tests

4   Extending Robot Framework

4.1   Creating test libraries

Robot Framework's actual testing capabilities are provided by test libraries. There are many existing libraries, some of which are even bundled with the core framework, but there is still often a need to create new ones. This task is not too complicated because, as this chapter illustrates, Robot Framework's library API is simple and straightforward.

4.1.1   Introduction

Supported programming languages

Robot Framework itself is written with Python and naturally test libraries extending it can be implemented using the same language. It is also possible to implement libraries with C using Python C API, although it is often easier to interact with C code from Python libraries using ctypes module.

Libraries implemented using Python can also act as wrappers to functionality implemented using other programming languages. A good example of this approach is the Remote library, and another widely used approaches is running external scripts or tools as separate processes.

Different test library APIs

Robot Framework has three different test library APIs.

Static API

The simplest approach is having a module or a class with functions/methods which map directly to keyword names. Keywords also take the same arguments as the methods implementing them. Keywords report failures with exceptions, log by writing to standard output and can return values using the return statement.

Dynamic API

Dynamic libraries are classes that implement a method to get the names of the keywords they implement, and another method to execute a named keyword with given arguments. The names of the keywords to implement, as well as how they are executed, can be determined dynamically at runtime, but reporting the status, logging and returning values is done similarly as in the static API.

Hybrid API

This is a hybrid between the static and the dynamic API. Libraries are classes with a method telling what keywords they implement, but those keywords must be available directly. Everything else except discovering what keywords are implemented is similar as in the static API.

All these APIs are described in this chapter. Everything is based on how the static API works, so its functions are discussed first. How the dynamic library API and the hybrid library API differ from it is then discussed in sections of their own.

4.1.2   Creating test library class or module

Test libraries can be implemented as Python modules or classes.

Library name

The name of a test library that is used when a library is imported is the same as the name of the module or class implementing it. For example, if you have a Python module MyLibrary (that is, file MyLibrary.py), it will create a library with name MyLibrary.

Python classes are always inside a module. If the name of a class implementing a library is the same as the name of the module, Robot Framework allows dropping the class name when importing the library. For example, class MyLib in MyLib.py file can be used as a library with just name MyLib. This also works with submodules so that if, for example, parent.MyLib module has class MyLib, importing it using just parent.MyLib works. If the module name and class name are different, libraries must be taken into use using both module and class names, such as mymodule.MyLibrary or parent.submodule.MyLib.

Tip

If the library name is really long, it is recommended to give the library a simpler alias by using AS.

Providing arguments to libraries

All test libraries implemented as classes can take arguments. These arguments are specified in the Setting section after the library name, and when Robot Framework creates an instance of the imported library, it passes them to its constructor. Libraries implemented as a module cannot take any arguments, so trying to use those results in an error.

The number of arguments needed by the library is the same as the number of arguments accepted by the library's constructor. The default values and variable number of arguments work similarly as with keyword arguments. Arguments passed to the library, as well as the library name itself, can be specified using variables, so it is possible to alter them, for example, from the command line.

*** Settings ***
Library    MyLibrary     10.0.0.1    8080
Library    AnotherLib    ${VAR}

Example implementations for the libraries used in the above example:

from example import Connection

class MyLibrary:

    def __init__(self, host, port=80):
        self._conn = Connection(host, int(port))

    def send_message(self, message):
        self._conn.send(message)
class AnotherLib:

    def __init__(self, environment):
        self.environment = environment

    def do_something(self):
        if self.environment == 'test':
            # do something in test environment
        else:
            # do something in other environments

Library scope

Libraries implemented as classes can have an internal state, which can be altered by keywords and with arguments to the constructor of the library. Because the state can affect how keywords actually behave, it is important to make sure that changes in one test case do not accidentally affect other test cases. These kind of dependencies may create hard-to-debug problems, for example, when new test cases are added and they use the library inconsistently.

Robot Framework attempts to keep test cases independent from each other: by default, it creates new instances of test libraries for every test case. However, this behavior is not always desirable, because sometimes test cases should be able to share a common state. Additionally, all libraries do not have a state and creating new instances of them is simply not needed.

Test libraries can control when new libraries are created with a class attribute ROBOT_LIBRARY_SCOPE . This attribute must be a string and it can have the following three values:

TEST

A new instance is created for every test case. A possible suite setup and suite teardown share yet another instance.

Prior to Robot Framework 3.2 this value was TEST CASE, but nowadays TEST is recommended. Because all unrecognized values are considered same as TEST, both values work with all versions. For the same reason it is possible to also use value TASK if the library is targeted for RPA usage more than testing. TEST is also the default value if the ROBOT_LIBRARY_SCOPE attribute is not set.

SUITE

A new instance is created for every test suite. The lowest-level test suites, created from test case files and containing test cases, have instances of their own, and higher-level suites all get their own instances for their possible setups and teardowns.

Prior to Robot Framework 3.2 this value was TEST SUITE. That value still works, but SUITE is recommended with libraries targeting Robot Framework 3.2 and newer.

GLOBAL
Only one instance is created during the whole test execution and it is shared by all test cases and test suites. Libraries created from modules are always global.

Note

If a library is imported multiple times with different arguments, a new instance is created every time regardless the scope.

When the SUITE or GLOBAL scopes are used with libraries that have a state, it is recommended that libraries have some special keyword for cleaning up the state. This keyword can then be used, for example, in a suite setup or teardown to ensure that test cases in the next test suites can start from a known state. For example, SeleniumLibrary uses the GLOBAL scope to enable using the same browser in different test cases without having to reopen it, and it also has the Close All Browsers keyword for easily closing all opened browsers.

Example library using the SUITE scope:

class ExampleLibrary:
    ROBOT_LIBRARY_SCOPE = 'SUITE'

    def __init__(self):
        self._counter = 0

    def count(self):
        self._counter += 1
        print(self._counter)

    def clear_counter(self):
        self._counter = 0

Library version

When a test library is taken into use, Robot Framework tries to determine its version. This information is then written into the syslog to provide debugging information. Library documentation tool Libdoc also writes this information into the keyword documentations it generates.

Version information is read from attribute ROBOT_LIBRARY_VERSION, similarly as library scope is read from ROBOT_LIBRARY_SCOPE. If ROBOT_LIBRARY_VERSION does not exist, information is tried to be read from __version__ attribute. These attributes must be class or module attributes, depending whether the library is implemented as a class or a module.

An example module using __version__:

__version__ = '0.1'

def keyword():
    pass

Documentation format

Library documentation tool Libdoc supports documentation in multiple formats. If you want to use something else than Robot Framework's own documentation formatting, you can specify the format in the source code using ROBOT_LIBRARY_DOC_FORMAT attribute similarly as scope and version are set with their own ROBOT_LIBRARY_* attributes.

The possible case-insensitive values for documentation format are ROBOT (default), HTML, TEXT (plain text), and reST (reStructuredText). Using the reST format requires the docutils module to be installed when documentation is generated.

Setting the documentation format is illustrated by the following example that uses reStructuredText format. See Documenting libraries section and Libdoc chapter for more information about documenting test libraries in general.

"""A library for *documentation format* demonstration purposes.

This documentation is created using reStructuredText__. Here is a link
to the only \`Keyword\`.

__ http://docutils.sourceforge.net
"""

ROBOT_LIBRARY_DOC_FORMAT = 'reST'


def keyword():
    """**Nothing** to see here. Not even in the table below.

    =======  =====  =====
    Table    here   has
    nothing  to     see.
    =======  =====  =====
    """
    pass

Library acting as listener

Listener interface allows external listeners to get notifications about test execution. They are called, for example, when suites, tests, and keywords start and end. Sometimes getting such notifications is also useful for test libraries, and they can register a custom listener by using ROBOT_LIBRARY_LISTENER attribute. The value of this attribute should be an instance of the listener to use, possibly the library itself.

For more information and examples see Libraries as listeners section.

@library decorator

An easy way to configure libraries implemented as classes is using the robot.api.deco.library class decorator. It allows configuring library's scope, version, custom argument converters, documentation format and listener with optional arguments scope, version, converter, doc_format and listener, respectively. When these arguments are used, they set the matching ROBOT_LIBRARY_SCOPE, ROBOT_LIBRARY_VERSION, ROBOT_LIBRARY_CONVERTERS, ROBOT_LIBRARY_DOC_FORMAT and ROBOT_LIBRARY_LISTENER attributes automatically:

from robot.api.deco import library

from example import Listener


@library(scope='GLOBAL', version='3.2b1', doc_format='reST', listener=Listener())
class Example:
    # ...

The @library decorator also disables the automatic keyword discovery by setting the ROBOT_AUTO_KEYWORDS argument to False by default. This means that it is mandatory to decorate methods with the @keyword decorator to expose them as keywords. If only that behavior is desired and no further configuration is needed, the decorator can also be used without parenthesis like:

from robot.api.deco import library


@library
class Example:
    # ...

If needed, the automatic keyword discovery can be enabled by using the auto_keywords argument:

from robot.api.deco import library


@library(scope='GLOBAL', auto_keywords=True)
class Example:
    # ...

The @library decorator only sets class attributes ROBOT_LIBRARY_SCOPE, ROBOT_LIBRARY_VERSION, ROBOT_LIBRARY_CONVERTERS, ROBOT_LIBRARY_DOC_FORMAT and ROBOT_LIBRARY_LISTENER if the respective arguments scope, version, converters, doc_format and listener are used. The ROBOT_AUTO_KEYWORDS attribute is set always. When attributes are set, they override possible existing class attributes.

Note

The @library decorator is new in Robot Framework 3.2 and converters argument is new in Robot Framework 5.0.

4.1.3   Creating keywords

What methods are considered keywords

When the static library API is used, Robot Framework uses introspection to find out what keywords the library class or module implements. By default it excludes methods and functions starting with an underscore. All the methods and functions that are not ignored are considered keywords. For example, the library below implements a single keyword My Keyword.

class MyLibrary:

    def my_keyword(self, arg):
        return self._helper_method(arg)

    def _helper_method(self, arg):
        return arg.upper()

Limiting public methods becoming keywords

Automatically considering all public methods and functions keywords typically works well, but there are cases where it is not desired. There are also situations where keywords are created when not expected. For example, when implementing a library as class, it can be a surprise that also methods in possible base classes are considered keywords. When implementing a library as a module, functions imported into the module namespace becoming keywords is probably even a bigger surprise.

This section explains how to prevent methods and functions becoming keywords.

Class based libraries

When a library is implemented as a class, it is possible to tell Robot Framework not to automatically expose methods as keywords by setting the ROBOT_AUTO_KEYWORDS attribute to the class with a false value:

class Example:
    ROBOT_AUTO_KEYWORDS = False

When the ROBOT_AUTO_KEYWORDS attribute is set like this, only methods that have explicitly been decorated with the @keyword decorator or otherwise have the robot_name attribute become keywords. The @keyword decorator can also be used for setting a custom name, tags and argument types to the keyword.

Although the ROBOT_AUTO_KEYWORDS attribute can be set to the class explicitly, it is more convenient to use the @library decorator that sets it to False by default:

from robot.api.deco import keyword, library


@library
class Example:

    @keyword
    def this_is_keyword(self):
        pass

    @keyword('This is keyword with custom name')
    def xxx(self):
        pass

    def this_is_not_keyword(self):
        pass

Note

Both limiting what methods become keywords using the ROBOT_AUTO_KEYWORDS attribute and the @library decorator are new in Robot Framework 3.2.

Another way to explicitly specify what keywords a library implements is using the dynamic or the hybrid library API.

Module based libraries

When implementing a library as a module, all functions in the module namespace become keywords. This is true also with imported functions, and that can cause nasty surprises. For example, if the module below would be used as a library, it would contain a keyword Example Keyword, as expected, but also a keyword Current Thread.

from threading import current_thread


def example_keyword():
    print('Running in thread "%s".' % current_thread().name)

A simple way to avoid imported functions becoming keywords is to only import modules (e.g. import threading) and to use functions via the module (e.g threading.current_thread()). Alternatively functions could be given an alias starting with an underscore at the import time (e.g. from threading import current_thread as _current_thread).

A more explicit way to limit what functions become keywords is using the module level __all__ attribute that Python itself uses for similar purposes. If it is used, only the listed functions can be keywords. For example, the library below implements only one keyword Example Keyword:

from threading import current_thread


__all__ = ['example_keyword']


def example_keyword():
    print('Running in thread "%s".' % current_thread().name)

def this_is_not_keyword():
    pass

If the library is big, maintaining the __all__ attribute when keywords are added, removed or renamed can be a somewhat big task. Another way to explicitly mark what functions are keywords is using the ROBOT_AUTO_KEYWORDS attribute similarly as it can be used with class based libraries. When this attribute is set to a false value, only functions explicitly decorated with the @keyword decorator become keywords. For example, also this library implements only one keyword Example Keyword:

from threading import current_thread

from robot.api.deco import keyword


ROBOT_AUTO_KEYWORDS = False


@keyword
def example_keyword():
    print('Running in thread "%s".' % current_thread().name)

def this_is_not_keyword():
    pass

Note

Limiting what functions become keywords using ROBOT_AUTO_KEYWORDS is a new feature in Robot Framework 3.2.

Using @not_keyword decorator

Functions in modules and methods in classes can be explicitly marked as "not keywords" by using the @not_keyword decorator. When a library is implemented as a module, this decorator can also be used to avoid imported functions becoming keywords.

from threading import current_thread

from robot.api.deco import not_keyword


not_keyword(current_thread)    # Don't expose `current_thread` as a keyword.


def example_keyword():
    print('Running in thread "%s".' % current_thread().name)

@not_keyword
def this_is_not_keyword():
    pass

Using the @not_keyword decorator is pretty much the opposite way to avoid functions or methods becoming keywords compared to disabling the automatic keyword discovery with the @library decorator or by setting the ROBOT_AUTO_KEYWORDS to a false value. Which one to use depends on the context.

Note

The @not_keyword decorator is new in Robot Framework 3.2.

Keyword names

Keyword names used in the test data are compared with method names to find the method implementing these keywords. Name comparison is case-insensitive, and also spaces and underscores are ignored. For example, the method hello maps to the keyword name Hello, hello or even h e l l o. Similarly both the do_nothing and doNothing methods can be used as the Do Nothing keyword in the test data.

Example library implemented as a module in the MyLibrary.py file:

def hello(name):
    print("Hello, %s!" % name)

def do_nothing():
    pass

The example below illustrates how the example library above can be used. If you want to try this yourself, make sure that the library is in the module search path.

*** Settings ***
Library    MyLibrary

*** Test Cases ***
My Test
    Do Nothing
    Hello    world
Setting custom name

It is possible to expose a different name for a keyword instead of the default keyword name which maps to the method name. This can be accomplished by setting the robot_name attribute on the method to the desired custom name:

def login(username, password):
  # ...

login.robot_name = 'Login via user panel'
*** Test Cases ***
My Test
    Login Via User Panel    ${username}    ${password}

Instead of explicitly setting the robot_name attribute like in the above example, it is typically easiest to use the @keyword decorator:

from robot.api.deco import keyword


@keyword('Login via user panel')
def login(username, password):
      # ...

Using this decorator without an argument will have no effect on the exposed keyword name, but will still set the robot_name attribute. This allows marking methods to expose as keywords without actually changing keyword names. Methods that have the robot_name attribute also create keywords even if the method name itself would start with an underscore.

Setting a custom keyword name can also enable library keywords to accept arguments using the embedded arguments syntax.

Keyword tags

Library keywords and user keywords can have tags. Library keywords can define them by setting the robot_tags attribute on the method to a list of desired tags. Similarly as when setting custom name, it is easiest to set this attribute by using the @keyword decorator:

from robot.api.deco import keyword


@keyword(tags=['tag1', 'tag2'])
def login(username, password):
    # ...

@keyword('Custom name', ['tags', 'here'])
def another_example():
    # ...

Another option for setting tags is giving them on the last line of keyword documentation with Tags: prefix and separated by a comma. For example:

def login(username, password):
    """Log user in to SUT.

    Tags: tag1, tag2
    """
    # ...

Keyword arguments

With a static and hybrid API, the information on how many arguments a keyword needs is got directly from the method that implements it. Libraries using the dynamic library API have other means for sharing this information, so this section is not relevant to them.

The most common and also the simplest situation is when a keyword needs an exact number of arguments. In this case, the method simply take exactly those arguments. For example, a method implementing a keyword with no arguments takes no arguments either, a method implementing a keyword with one argument also takes one argument, and so on.

Example keywords taking different numbers of arguments:

def no_arguments():
    print("Keyword got no arguments.")

def one_argument(arg):
    print("Keyword got one argument '%s'." % arg)

def three_arguments(a1, a2, a3):
    print("Keyword got three arguments '%s', '%s' and '%s'." % (a1, a2, a3))

Default values to keywords

It is often useful that some of the arguments that a keyword uses have default values.

In Python a method has always exactly one implementation and possible default values are specified in the method signature. The syntax, which is familiar to all Python programmers, is illustrated below:

def one_default(arg='default'):
    print("Argument has value %s" % arg)

def multiple_defaults(arg1, arg2='default 1', arg3='default 2'):
    print("Got arguments %s, %s and %s" % (arg1, arg2, arg3))

The first example keyword above can be used either with zero or one arguments. If no arguments are given, arg gets the value default. If there is one argument, arg gets that value, and calling the keyword with more than one argument fails. In the second example, one argument is always required, but the second and the third one have default values, so it is possible to use the keyword with one to three arguments.

*** Test Cases ***
Defaults
    One Default
    One Default    argument
    Multiple Defaults    required arg
    Multiple Defaults    required arg    optional
    Multiple Defaults    required arg    optional 1    optional 2

Variable number of arguments (*varargs)

Robot Framework supports also keywords that take any number of arguments.

Python supports methods accepting any number of arguments. The same syntax works in libraries and, as the examples below show, it can also be combined with other ways of specifying arguments:

def any_arguments(*args):
    print("Got arguments:")
    for arg in args:
        print(arg)

def one_required(required, *others):
    print("Required: %s\nOthers:" % required)
    for arg in others:
        print(arg)

def also_defaults(req, def1="default 1", def2="default 2", *rest):
    print(req, def1, def2, rest)
*** Test Cases ***
Varargs
    Any Arguments
    Any Arguments    argument
    Any Arguments    arg 1    arg 2    arg 3    arg 4    arg 5
    One Required     required arg
    One Required     required arg    another arg    yet another
    Also Defaults    required
    Also Defaults    required    these two    have defaults
    Also Defaults    1    2    3    4    5    6

Free keyword arguments (**kwargs)

Robot Framework supports Python's **kwargs syntax. How to use use keywords that accept free keyword arguments, also known as free named arguments, is discussed under the Creating test cases section. In this section we take a look at how to create such keywords.

If you are already familiar how kwargs work with Python, understanding how they work with Robot Framework test libraries is rather simple. The example below shows the basic functionality:

def example_keyword(**stuff):
    for name, value in stuff.items():
        print(name, value)
*** Test Cases ***
Keyword Arguments
    Example Keyword    hello=world        # Logs 'hello world'.
    Example Keyword    foo=1    bar=42    # Logs 'foo 1' and 'bar 42'.

Basically, all arguments at the end of the keyword call that use the named argument syntax name=value, and that do not match any other arguments, are passed to the keyword as kwargs. To avoid using a literal value like foo=quux as a free keyword argument, it must be escaped like foo\=quux.

The following example illustrates how normal arguments, varargs, and kwargs work together:

def various_args(arg=None, *varargs, **kwargs):
    if arg is not None:
        print('arg:', arg)
    for value in varargs:
        print('vararg:', value)
    for name, value in sorted(kwargs.items()):
        print('kwarg:', name, value)
*** Test Cases ***
Positional
    Various Args    hello    world                # Logs 'arg: hello' and 'vararg: world'.

Named
    Various Args    arg=value                     # Logs 'arg: value'.

Kwargs
    Various Args    a=1    b=2    c=3             # Logs 'kwarg: a 1', 'kwarg: b 2' and 'kwarg: c 3'.
    Various Args    c=3    a=1    b=2             # Same as above. Order does not matter.

Positional and kwargs
    Various Args    1    2    kw=3                # Logs 'arg: 1', 'vararg: 2' and 'kwarg: kw 3'.

Named and kwargs
    Various Args    arg=value      hello=world    # Logs 'arg: value' and 'kwarg: hello world'.
    Various Args    hello=world    arg=value      # Same as above. Order does not matter.

For a real world example of using a signature exactly like in the above example, see Run Process and Start Keyword keywords in the Process library.

Keyword-only arguments

Starting from Robot Framework 3.1, it is possible to use named-only arguments with different keywords. This support is provided by Python's keyword-only arguments. Keyword-only arguments are specified after possible *varargs or after a dedicated * marker when *varargs are not needed. Possible **kwargs are specified after keyword-only arguments.

Example:

def sort_words(*words, case_sensitive=False):
    key = str.lower if case_sensitive else None
    return sorted(words, key=key)

def strip_spaces(word, *, left=True, right=True):
    if left:
        word = word.lstrip()
    if right:
        word = word.rstrip()
    return word
*** Test Cases ***
Example
    Sort Words    Foo    bar    baZ
    Sort Words    Foo    bar    baZ    case_sensitive=True
    Strip Spaces    ${word}    left=False

Positional-only arguments

Python supports so called positional-only arguments that make it possible to specify that an argument can only be given as a positional argument, not as a named argument like name=value. Positional-only arguments are specified before normal arguments and a special / marker must be used after them:

def keyword(posonly, /, normal):
    print(f"Got positional-only argument {posonly} and normal argument {normal}.")

The above keyword could be used like this:

*** Test Cases ***
Example
    # Positional-only and normal argument used as positional arguments.
    Keyword    foo    bar
    # Normal argument can also be named.
    Keyword    foo    normal=bar

If a positional-only argument is used with a value that contains an equal sign like example=usage, it is not considered to mean named argument syntax even if the part before the = would match the argument name. This rule only applies if the positional-only argument is used in its correct position without other arguments using the name argument syntax before it, though.

*** Test Cases ***
Example
    # Positional-only argument gets literal value `posonly=foo` in this case.
    Keyword    posonly=foo    normal=bar
    # This fails.
    Keyword    normal=bar    posonly=foo

Positional-only arguments are fully supported starting from Robot Framework 4.0. Using them as positional arguments works also with earlier versions, but using them as named arguments causes an error on Python side.

Argument conversion

Arguments defined in Robot Framework test data are, by default, passed to keywords as Unicode strings. There are, however, several ways to use non-string values as well:

Automatic argument conversion based on function annotations, types specified using the @keyword decorator, and argument default values are all new features in Robot Framework 3.1. The Supported conversions section specifies which argument conversion are supported in these cases.

Prior to Robot Framework 4.0, automatic conversion was done only if the given argument was a string. Nowadays it is done regardless the argument type.

Manual argument conversion

If no type information is specified to Robot Framework, all arguments not passed as variables are given to keywords as Unicode strings. This includes cases like this:

*** Test Cases ***
Example
    Example Keyword    42    False

It is always possible to convert arguments passed as strings insider keywords. In simple cases this means using int() or float() to convert arguments to numbers, but other kind of conversion is possible as well. When working with Boolean values, care must be taken because all non-empty strings, including string False, are considered true by Python. Robot Framework's own robot.utils.is_truthy() utility handles this nicely as it considers strings like FALSE, NO and NONE (case-insensitively) to be false:

from robot.utils import is_truthy


def example_keyword(count, case_insensitive):
    count = int(count)
    if is_truthy(case_insensitive):
        # ...

Keywords can also use Robot Framework's argument conversion functionality via the robot.api.TypeInfo class and its convert method. This can be useful if the needed conversion logic is more complicated or the are needs for better error reporting than what simply using, for example, int() provides.

from robot.api import TypeInfo


def example_keyword(count, case_insensitive):
    count = TypeInfo.from_type(int).convert(count)
    if TypeInfo.from_type(bool).convert(case_insensitive):
        # ...

Tip

It is generally recommended to specify types using type hints or otherwise and let Robot Framework handle argument conversion automatically. Manual argument conversion should only be needed in special cases.

Note

robot.api.TypeInfo is new in Robot Framework 7.0.

Specifying argument types using function annotations

Starting from Robot Framework 3.1, arguments passed to keywords are automatically converted if argument type information is available and the type is recognized. The most natural way to specify types is using Python function annotations. For example, the keyword in the previous example could be implemented as follows and arguments would be converted automatically:

def example_keyword(count: int, case_insensitive: bool = True):
    if case_insensitive:
        # ...

See the Supported conversions section below for a list of types that are automatically converted and what values these types accept. It is an error if an argument having one of the supported types is given a value that cannot be converted. Annotating only some of the arguments is fine.

Annotating arguments with other than the supported types is not an error, and it is also possible to use annotations for other than typing purposes. In those cases no conversion is done, but annotations are nevertheless shown in the documentation generated by Libdoc.

Keywords can also have a return type annotation specified using the -> notation at the end of the signature like def example() -> int:. This information is not used for anything during execution, but starting from Robot Framework 7.0 it is shown by Libdoc for documentation purposes.

Specifying argument types using @keyword decorator

An alternative way to specify explicit argument types is using the @keyword decorator. Starting from Robot Framework 3.1, it accepts an optional types argument that can be used to specify argument types either as a dictionary mapping argument names to types or as a list mapping arguments to types based on position. These approaches are shown below implementing the same keyword as in earlier examples:

from robot.api.deco import keyword


@keyword(types={'count': int, 'case_insensitive': bool})
def example_keyword(count, case_insensitive=True):
    if case_insensitive:
        # ...

@keyword(types=[int, bool])
def example_keyword(count, case_insensitive=True):
    if case_insensitive:
        # ...

Regardless of the approach that is used, it is not necessarily to specify types for all arguments. When specifying types as a list, it is possible to use None to mark that a certain argument does not have type information and arguments at the end can be omitted altogether. For example, both of these keywords specify the type only for the second argument:

@keyword(types={'second': float})
def example1(first, second, third):
    # ...

@keyword(types=[None, float])
def example2(first, second, third):
    # ...

Starting from Robot Framework 7.0, it is possible to specify the keyword return type by using key 'return' with an appropriate type in the type dictionary. This information is not used for anything during execution, but it is shown by Libdoc for documentation purposes.

If any types are specified using the @keyword decorator, type information got from annotations is ignored with that keyword. Setting types to None like @keyword(types=None) disables type conversion altogether so that also type information got from default values is ignored.

Implicit argument types based on default values

If type information is not got explicitly using annotations or the @keyword decorator, Robot Framework 3.1 and newer tries to get it based on possible argument default value. In this example count and case_insensitive get types int and bool, respectively:

def example_keyword(count=-1, case_insensitive=True):
    if case_insensitive:
        # ...

When type information is got implicitly based on the default values, argument conversion itself is not as strict as when the information is got explicitly:

  • Conversion may be attempted also to other "similar" types. For example, if converting to an integer fails, float conversion is attempted.
  • Conversion failures are not errors, keywords get the original value in these cases instead.

If an argument has an explicit type and a default value, conversion is first attempted based on the explicit type. If that fails, then conversion is attempted based on the default value. In this special case conversion based on the default value is strict and a conversion failure causes an error.

If argument conversion based on default values is not desired, the whole argument conversion can be disabled with the @keyword decorator like @keyword(types=None).

Note

Prior to Robot Framework 4.0 conversion was done based on the default value only if the argument did not have an explict type.

Supported conversions

The table below lists the types that Robot Framework 3.1 and newer convert arguments to. These characteristics apply to all conversions:

  • Type can be explicitly specified using function annotations or the @keyword decorator.
  • If not explicitly specified, type can be got implicitly from argument default values.
  • Conversion is done regardless of the type of the given argument. If the argument type is incompatible with the expected type, conversion fails.
  • Conversion failures cause an error if the type has been specified explicitly. If the type is got based on a default value, the given argument is used as-is.

Note

If an argument has both a type hint and a default value, conversion is first attempted based on the type hint and then, if that fails, based on the default value type. This behavior is likely to change in the future so that conversion based on the default value is done only if the argument does not have a type hint. That will change conversion behavior in cases like arg: list = None where None conversion will not be attempted anymore. Library creators are strongly recommended to specify the default value type explicitly like arg: list | None = None already now.

The type to use can be specified either using concrete types (e.g. list), by using abstract base classes (ABC) (e.g. Sequence), or by using sub classes of these types (e.g. MutableSequence). Also types in in the typing module that map to the supported concrete types or ABCs (e.g. List) are supported. In all these cases the argument is converted to the concrete type.

In addition to using the actual types (e.g. int), it is possible to specify the type using type names as a string (e.g. 'int') and some types also have aliases (e.g. 'integer'). Matching types to names and aliases is case-insensitive.

The Accepts column specifies which given argument types are converted. If the given argument already has the expected type, no conversion is done. Other types cause conversion failures.

Supported argument conversions
Type ABC Aliases Accepts Explanation Examples
bool   boolean str, int, float, None

Strings TRUE, YES, ON and 1 are converted to True, the empty string as well as FALSE, NO, OFF and 0 are converted to False, and the string NONE is converted to None. Other strings and other accepted values are passed as-is, allowing keywords to handle them specially if needed. All string comparisons are case-insensitive.

True and false strings can be localized. See the Translations appendix for supported translations.

TRUE (converted to True)
off (converted to False)
example (used as-is)
int Integral integer, long str, float

Conversion is done using the int built-in function. Floats are accepted only if they can be represented as integers exactly. For example, 1.0 is accepted and 1.1 is not. If converting a string to an integer fails and the type is got implicitly based on a default value, conversion to float is attempted as well.

Starting from Robot Framework 4.1, it is possible to use hexadecimal, octal and binary numbers by prefixing values with 0x, 0o and 0b, respectively.

Starting from Robot Framework 4.1, spaces and underscores can be used as visual separators for digit grouping purposes.

Starting from Robot Framework 7.0, strings representing floats are accepted as long as their decimal part is zero. This includes using the scientific notation like 1e100.

42
-1
10 000 000
1e100
0xFF
0o777
0b1010
0xBAD_C0FFEE
${1}
${1.0}
float Real double str, Real

Conversion is done using the float built-in.

Starting from Robot Framework 4.1, spaces and underscores can be used as visual separators for digit grouping purposes.

3.14
2.9979e8
10 000.000 01
10_000.000_01
Decimal     str, int, float

Conversion is done using the Decimal class. Decimal is recommended over float when decimal numbers need to be represented exactly.

Starting from Robot Framework 4.1, spaces and underscores can be used as visual separators for digit grouping purposes.

3.14
10 000.000 01
10_000.000_01
str   string, unicode Any

All arguments are converted to Unicode strings.

New in Robot Framework 4.0.

 
bytes     str, bytearray Strings are converted to bytes so that each Unicode code point below 256 is directly mapped to a matching byte. Higher code points are not allowed.
good
hyvä (converted to hyv\xe4)
\x00 (the null byte)
bytearray     str, bytes Same conversion as with bytes, but the result is a bytearray.  
datetime     str, int, float

Strings are expected to be timestamps in ISO 8601 like format YYYY-MM-DD hh:mm:ss.mmmmmm, where any non-digit character can be used as a separator or separators can be omitted altogether. Additionally, only the date part is mandatory, all possibly missing time components are considered to be zeros.

Integers and floats are considered to represent seconds since the Unix epoch.

2022-02-09T16:39:43.632269
2022-02-09 16:39
2022-02-09
${1644417583.632269} (Epoch time)
date     str Same string conversion as with datetime, but all time components are expected to be omitted or to be zeros.
2018-09-12
timedelta     str, int, float Strings are expected to represent a time interval in one of the time formats Robot Framework supports: time as number, time as time string or time as "timer" string. Integers and floats are considered to be seconds.
42 (42 seconds)
1 minute 2 seconds
01:02 (same as above)
Path PathLike   str

Strings are converted to pathlib.Path objects. On Windows / is converted to \ automatically.

New in Robot Framework 6.0.

/tmp/absolute/path
relative/path/to/file.ext
name.txt
Enum     str

The specified type must be an enumeration (a subclass of Enum or Flag) and given arguments must match its member names.

Matching member names is case, space, underscore and hyphen insensitive, but exact matches have precedence over normalized matches. Ignoring hyphens is new in Robot Framework 7.0.

Enumeration documentation and members are shown in documentation generated by Libdoc automatically.

class Direction(Enum):
    """Move direction."""
    NORTH = auto()
    NORTH_WEST = auto()

def kw(arg: Direction):
    ...
NORTH (Direction.NORTH)
north west (Direction.NORTH_WEST)
IntEnum     str, int

The specified type must be an integer based enumeration (a subclass of IntEnum or IntFlag) and given arguments must match its member names or values.

Matching member names works the same way as with Enum. Values can be given as integers and as strings that can be converted to integers.

Enumeration documentation and members are shown in documentation generated by Libdoc automatically.

New in Robot Framework 4.1.

class PowerState(IntEnum):
    """Turn system ON or OFF."""
    OFF = 0
    ON = 1

def kw(arg: PowerState):
    ...
OFF (PowerState.OFF)
1 (PowerState.ON)
Literal     Any

Only specified values are accepted. Values can be strings, integers, bytes, Booleans, enums and None, and used arguments are converted using the value type specific conversion logic.

Strings are case, space, underscore and hyphen insensitive, but exact matches have precedence over normalized matches.

Literal provides similar functionality as Enum, but does not support custom documentation.

New in Robot Framework 7.0.

def kw(arg: Literal['ON', 'OFF']):
    ...
OFF
on
None     str String NONE (case-insensitive) is converted to the Python None object. Other values cause an error.
None
Any     Any

Any value is accepted. No conversion is done.

New in Robot Framework 6.1.

 
list Sequence sequence str, Sequence

Strings must be Python list literals. They are converted to actual lists using the ast.literal_eval function. They can contain any values ast.literal_eval supports, including lists and other containers.

If the used type hint is list (e.g. arg: list), sequences that are not lists are converted to lists. If the type hint is generic Sequence, sequences are used without conversion.

Alias sequence is new in Robot Framework 7.0.

['one', 'two']
[('one', 1), ('two', 2)]
tuple     str, Sequence Same as list, but string arguments must tuple literals.
('one', 'two')
set Set   str, Container Same as list, but string arguments must be set literals or set() to create an empty set.
{1, 2, 3, 42}
set()
frozenset     str, Container Same as set, but the result is a frozenset.
{1, 2, 3, 42}
frozenset()
dict Mapping dictionary, mapping, map str, Mapping

Same as list, but string arguments must be dictionary literals.

Alias mapping is new in Robot Framework 7.0.

{'a': 1, 'b': 2}
{'key': 1, 'nested': {'key': 2}}
TypedDict     str, Mapping

Same as dict, but dictionary items are also converted to the specified types and items not included in the type spec are not allowed.

New in Robot Framework 6.0. Normal dict conversion was used earlier.

class Config(TypedDict):
    width: int
    enabled: bool
{'width': 1600, 'enabled': True}

Note

Starting from Robot Framework 5.0, types that have a converted are automatically shown in Libdoc outputs.

Note

Prior to Robot Framework 4.0, most types supported converting string NONE (case-insensitively) to Python None. That support has been removed and None conversion is only done if an argument has None as an explicit type or as a default value.

Specifying multiple possible types

Starting from Robot Framework 4.0, it is possible to specify that an argument has multiple possible types. In this situation argument conversion is attempted based on each type and the whole conversion fails if none of these conversions succeed.

When using function annotations, the natural syntax to specify that an argument has multiple possible types is using Union:

from typing import Union


def example(length: Union[int, float], padding: Union[int, str, None] = None):
    ...

When using Python 3.10 or newer, it is possible to use the native type1 | type2 syntax instead:

def example(length: int | float, padding: int | str | None = None):
    ...

Robot Framework 7.0 enhanced the support for the union syntax so that also "stringly typed" unions like 'type1 | type2' work. This syntax works also with older Python versions:

def example(length: 'int | float', padding: 'int | str | None' = None):
    ...

An alternative is specifying types as a tuple. It is not recommended with annotations, because that syntax is not supported by other tools, but it works well with the @keyword decorator:

from robot.api.deco import keyword


@keyword(types={'length': (int, float), 'padding': (int, str, None)})
def example(length, padding=None):
    ...

With the above examples the length argument would first be converted to an integer and if that fails then to a float. The padding would be first converted to an integer, then to a string, and finally to None.

If the given argument has one of the accepted types, then no conversion is done and the argument is used as-is. For example, if the length argument gets value 1.5 as a float, it would not be converted to an integer. Notice that using non-string values like floats as an argument requires using variables as these examples giving different values to the length argument demonstrate:

*** Test Cases ***
Conversion
    Example    10        # Argument is a string. Converted to an integer.
    Example    1.5       # Argument is a string. Converted to a float.
    Example    ${10}     # Argument is an integer. Accepted as-is.
    Example    ${1.5}    # Argument is a float. Accepted as-is.

If one of the accepted types is string, then no conversion is done if the given argument is a string. As the following examples giving different values to the padding argument demonstrate, also in these cases passing other types is possible using variables:

*** Test Cases ***
Conversion
    Example    1    big        # Argument is a string. Accepted as-is.
    Example    1    10         # Argument is a string. Accepted as-is.
    Example    1    ${10}      # Argument is an integer. Accepted as-is.
    Example    1    ${None}    # Argument is `None`. Accepted as-is.
    Example    1    ${1.5}     # Argument is a float. Converted to an integer.

If the given argument does not have any of the accepted types, conversion is attempted in the order types are specified. If any conversion succeeds, the resulting value is used without attempting remaining conversions. If no individual conversion succeeds, the whole conversion fails.

If a specified type is not recognized by Robot Framework, then the original argument value is used as-is. For example, with this keyword conversion would first be attempted to an integer, but if that fails the keyword would get the original argument:

def example(argument: Union[int, Unrecognized]):
    ...

Starting from Robot Framework 6.1, the above logic works also if an unrecognized type is listed before a recognized type like Union[Unrecognized, int]. Also in this case int conversion is attempted, and the argument id passed as-is if it fails. With earlier Robot Framework versions, int conversion would not be attempted at all.

Type conversion with generics

With generics also the parameterized syntax like list[int] or dict[str, int] works. When this syntax is used, the given value is first converted to the base type and then individual items are converted to the nested types. Conversion with different generic types works according to these rules:

  • With lists there can be only one type like list[float]. All list items are converted to that type.
  • With tuples there can be any number of types like tuple[int, int] and tuple[str, int, bool]. Tuples used as arguments are expected to have exactly that amount of items and they are converted to matching types.
  • To create a homogeneous tuple, it is possible to use exactly one type and ellipsis like tuple[int, ...]. In this case tuple can have any number of items and they are all converted to the specified type.
  • With dictionaries there must be exactly two types like dict[str, int]. Dictionary keys are converted using the former type and values using the latter.
  • With sets there can be exactly one type like set[float]. Conversion logic is the same as with lists.

Using the native list[int] syntax requires Python 3.9 or newer. If there is a need to support also earlier Python versions, it is possible to either use matching types from the typing module like List[int] or use the "stringly typed" syntax like 'list[int]'.

Note

Support for converting nested types with generics is new in Robot Framework 6.0. Same syntax works also with earlier versions, but arguments are only converted to the base type and nested types are not used for anything.

Note

Support for "stringly typed" parameterized generics is new in Robot Framework 7.0.

Custom argument converters

In addition to doing argument conversion automatically as explained in the previous sections, Robot Framework supports custom argument conversion. This functionality has two main use cases:

  • Overriding the standard argument converters provided by the framework.
  • Adding argument conversion for custom types and for other types not supported out-of-the-box.

Argument converters are functions or other callables that get arguments used in data and convert them to desired format before arguments are passed to keywords. Converters are registered for libraries by setting ROBOT_LIBRARY_CONVERTERS attribute (case-sensitive) to a dictionary mapping desired types to converts. When implementing a library as a module, this attribute must be set on the module level, and with class based libraries it must be a class attribute. With libraries implemented as classes, it is also possible to use the converters argument with the @library decorator. Both of these approaches are illustrated by examples in the following sections.

Note

Custom argument converters are new in Robot Framework 5.0.

Overriding default converters

Let's assume we wanted to create a keyword that accepts date objects for users in Finland where the commonly used date format is dd.mm.yyyy. The usage could look something like this:

*** Test Cases ***
Example
    Keyword    25.1.2022

Automatic argument conversion supports dates, but it expects them to be in yyyy-mm-dd format so it will not work. A solution is creating a custom converter and registering it to handle date conversion:

from datetime import date


# Converter function.
def parse_fi_date(value):
    day, month, year = value.split('.')
    return date(int(year), int(month), int(day))


# Register converter function for the specified type.
ROBOT_LIBRARY_CONVERTERS = {date: parse_fi_date}


# Keyword using custom converter. Converter is resolved based on argument type.
def keyword(arg: date):
    print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')
Conversion errors

If we try using the above keyword with invalid argument like invalid, it fails with this error:

ValueError: Argument 'arg' got value 'invalid' that cannot be converted to date: not enough values to unpack (expected 3, got 1)

This error is not too informative and does not tell anything about the expected format. Robot Framework cannot provide more information automatically, but the converter itself can be enhanced to validate the input. If the input is invalid, the converter should raise a ValueError with an appropriate message. In this particular case there would be several ways to validate the input, but using regular expressions makes it possible to validate both that the input has dots (.) in correct places and that date parts contain correct amount of digits:

from datetime import date
import re


def parse_fi_date(value):
    # Validate input using regular expression and raise ValueError if not valid.
    match = re.match(r'(\d{1,2})\.(\d{1,2})\.(\d{4})$', value)
    if not match:
        raise ValueError(f"Expected date in format 'dd.mm.yyyy', got '{value}'.")
    day, month, year = match.groups()
    return date(int(year), int(month), int(day))


ROBOT_LIBRARY_CONVERTERS = {date: parse_fi_date}


def keyword(arg: date):
    print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')

With the above converter code, using the keyword with argument invalid fails with a lot more helpful error message:

ValueError: Argument 'arg' got value 'invalid' that cannot be converted to date: Expected date in format 'dd.mm.yyyy', got 'invalid'.
Restricting value types

By default Robot Framework tries to use converters with all given arguments regardless their type. This means that if the earlier example keyword would be used with a variable containing something else than a string, conversion code would fail in the re.match call. For example, trying to use it with argument ${42} would fail like this:

ValueError: Argument 'arg' got value '42' (integer) that cannot be converted to date: TypeError: expected string or bytes-like object

This error situation could naturally handled in the converter code by checking the value type, but if the converter only accepts certain types, it is typically easier to just restrict the value to that type. Doing it requires only adding appropriate type hint to the converter:

def parse_fi_date(value: str):
     # ...

Notice that this type hint is not used for converting the value before calling the converter, it is used for strictly restricting which types can be used. With the above addition calling the keyword with ${42} would fail like this:

ValueError: Argument 'arg' got value '42' (integer) that cannot be converted to date.

If the converter can accept multiple types, it is possible to specify types as a Union. For example, if we wanted to enhance our keyword to accept also integers so that they would be considered seconds since the Unix epoch, we could change the converter like this:

from datetime import date
import re
from typing import Union


# Accept both strings and integers.
def parse_fi_date(value: Union[str, int]):
    # Integers are converted separately.
    if isinstance(value, int):
        return date.fromtimestamp(value)
    match = re.match(r'(\d{1,2})\.(\d{1,2})\.(\d{4})$', value)
    if not match:
        raise ValueError(f"Expected date in format 'dd.mm.yyyy', got '{value}'.")
    day, month, year = match.groups()
    return date(int(year), int(month), int(day))


ROBOT_LIBRARY_CONVERTERS = {date: parse_fi_date}


def keyword(arg: date):
    print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')
Converting custom types

A problem with the earlier example is that date objects could only be given in dd.mm.yyyy format. It would not work if there was a need to support dates in different formats like in this example:

*** Test Cases ***
Example
    Finnish     25.1.2022
    US          1/25/2022
    ISO 8601    2022-01-22

A solution to this problem is creating custom types instead of overriding the default date conversion:

from datetime import date
import re
from typing import Union

from robot.api.deco import keyword, library


# Custom type. Extends an existing type but that is not required.
class FiDate(date):

    # Converter function implemented as a classmethod. It could be a normal
    # function as well, but this way all code is in the same class.
    @classmethod
    def from_string(cls, value: str):
        match = re.match(r'(\d{1,2})\.(\d{1,2})\.(\d{4})$', value)
        if not match:
            raise ValueError(f"Expected date in format 'dd.mm.yyyy', got '{value}'.")
        day, month, year = match.groups()
        return cls(int(year), int(month), int(day))


# Another custom type.
class UsDate(date):

    @classmethod
    def from_string(cls, value: str):
        match = re.match(r'(\d{1,2})/(\d{1,2})/(\d{4})$', value)
        if not match:
            raise ValueError(f"Expected date in format 'mm/dd/yyyy', got '{value}'.")
        month, day, year = match.groups()
        return cls(int(year), int(month), int(day))


# Register converters using '@library' decorator.
@library(converters={FiDate: FiDate.from_string, UsDate: UsDate.from_string})
class Library:

    # Uses custom converter supporting 'dd.mm.yyyy' format.
    @keyword
    def finnish(self, arg: FiDate):
        print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')

    # Uses custom converter supporting 'mm/dd/yyyy' format.
    @keyword
    def us(self, arg: UsDate):
        print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')

    # Uses IS0-8601 compatible default conversion.
    @keyword
    def iso_8601(self, arg: date):
        print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')

    # Accepts date in different formats.
    @keyword
    def any(self, arg: Union[FiDate, UsDate, date]):
        print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')
Strict type validation

Converters are not used at all if the argument is of the specified type to begin with. It is thus easy to enable strict type validation with a custom converter that does not accept any value. For example, the Example keyword accepts only StrictType instances:

class StrictType:
    pass


def strict_converter(arg):
    raise TypeError(f'Only StrictType instances accepted, got {type(arg).__name__}.')


ROBOT_LIBRARY_CONVERTERS = {StrictType: strict_converter}


def example(argument: StrictType):
    assert isinstance(argument, StrictType)

As a convenience, Robot Framework allows setting converter to None to get the same effect. For example, this code behaves exactly the same way as the code above:

class StrictType:
    pass


ROBOT_LIBRARY_CONVERTERS = {StrictType: None}


def example(argument: StrictType):
    assert isinstance(argument, StrictType)

Note

Using None as a strict converter is new in Robot Framework 6.0. An explicit converter function needs to be used with earlier versions.

Accessing the test library from converter

Starting from Robot Framework 6.1, it is possible to access the library instance from a converter function. This allows defining dynamic type conversions that depend on the library state. For example, if the library can be configured to test particular locale, you might use the library state to determine how a date should be parsed like this:

from datetime import date
import re


def parse_date(value, library):
    # Validate input using regular expression and raise ValueError if not valid.
    # Use locale based from library state to determine parsing format.
    if library.locale == 'en_US':
        match = re.match(r'(?P<month>\d{1,2})/(?P<day>\d{1,2})/(?P<year>\d{4})$', value)
        format = 'mm/dd/yyyy'
    else:
        match = re.match(r'(?P<day>\d{1,2})\.(?P<month>\d{1,2})\.(?P<year>\d{4})$', value)
        format = 'dd.mm.yyyy'
    if not match:
        raise ValueError(f"Expected date in format '{format}', got '{value}'.")
    return date(int(match.group('year')), int(match.group('month')), int(match.group('day')))


ROBOT_LIBRARY_CONVERTERS = {date: parse_date}


def keyword(arg: date):
    print(f'year: {arg.year}, month: {arg.month}, day: {arg.day}')

The library argument to converter function is optional, i.e. if the converter function only accepts one argument, the library argument is omitted. Similar result can be achieved by making the converter function accept only variadic arguments, e.g. def parse_date(*varargs).

Converter documentation

Information about converters is added to outputs produced by Libdoc automatically. This information includes the name of the type, accepted values (if specified using type hints) and documentation. Type information is automatically linked to all keywords using these types.

Used documentation is got from the converter function by default. If it does not have any documentation, documentation is got from the type. Both of these approaches to add documentation to converters in the previous example thus produce the same result:

class FiDate(date):

    @classmethod
    def from_string(cls, value: str):
        """Date in ``dd.mm.yyyy`` format."""
        # ...


class UsDate(date):
    """Date in ``mm/dd/yyyy`` format."""

    @classmethod
    def from_string(cls, value: str):
        # ...

Adding documentation is in general recommended to provide users more information about conversion. It is especially important to document converter functions registered for existing types, because their own documentation is likely not very useful in this context.

@keyword decorator

Although Robot Framework gets lot of information about keywords automatically, such as their names and arguments, there are sometimes needs to configure this information further. This is typically easiest done by using the robot.api.deco.keyword decorator. It has several useful usages that are explained thoroughly elsewhere and only listened here as a reference:

@not_keyword decorator

The robot.api.deco.not_keyword decorator can be used for disabling functions or methods becoming keywords.

Using custom decorators

When implementing keywords, it is sometimes useful to modify them with Python decorators. However, decorators often modify function signatures and can thus confuse Robot Framework's introspection when determining which arguments keywords accept. This is especially problematic when creating library documentation with Libdoc and when using external tools like RIDE. The easiest way to avoid this problem is decorating the decorator itself using functools.wraps. Other solutions include using external modules like decorator and wrapt that allow creating fully signature-preserving decorators.

Note

Support for "unwrapping" decorators decorated with functools.wraps is a new feature in Robot Framework 3.2.

Embedding arguments into keyword names

Library keywords can also accept embedded arguments the same way as user keywords. This section mainly covers the Python syntax to use to create such keywords, the embedded arguments syntax itself is covered in detail as part of user keyword documentation.

Library keywords with embedded arguments need to have a custom name that is typically set using the @keyword decorator. Values matching embedded arguments are passed to the function or method implementing the keyword as positional arguments. If the function or method accepts more arguments, they can be passed to the keyword as normal positional or named arguments. Argument names do not need to match the embedded argument names, but that is generally a good convention.

Keywords accepting embedded arguments:

from robot.api.deco import keyword


@keyword('Select ${animal} from list')
def select_animal_from_list(animal):
    ...


@keyword('Number of ${animals} should be')
def number_of_animals_should_be(animals, count):
    ...

Tests using the above keywords:

*** Test Cases ***
Embedded arguments
    Select cat from list
    Select dog from list

Embedded and normal arguments
    Number of cats should be    2
    Number of dogs should be    count=3

If type information is specified, automatic argument conversion works also with embedded arguments:

@keyword('Add ${quantity} copies of ${item} to cart')
def add_copies_to_cart(quantity: int, item: str):
    ...

Note

Support for mixing embedded arguments and normal arguments is new in Robot Framework 7.0.

Asynchronous keywords

Starting from Robot Framework 6.1, it is possible to run native asynchronous functions (created by async def) just like normal functions:

import asyncio
from robot.api.deco import keyword


@keyword
async def this_keyword_waits():
    await asyncio.sleep(5)

You can get the reference of the loop using asyncio.get_running_loop() or asyncio.get_event_loop(). Be careful when modifying how the loop runs, it is a global resource. For example, never call loop.close() because it will make it impossible to run any further coroutines. If you have any function or resource that requires the event loop, even though await is not used explicitly, you have to define your function as async to have the event loop available.

More examples of functionality:

import asyncio
from robot.api.deco import keyword


async def task_async():
    await asyncio.sleep(5)

@keyword
async def examples():
    tasks = [task_async() for _ in range(10)]
    results = await asyncio.gather(*tasks)

    background_task = asyncio.create_task(task_async())
    await background_task

    # If running with Python 3.10 or higher
    async with asyncio.TaskGroup() as tg:
        task1 = tg.create_task(task_async())
        task2 = tg.create_task(task_async())

Note

Robot Framework waits for the function to complete. If you want to have a task that runs for a long time, use, for example, asyncio.create_task(). It is your responsibility to manage the task and save a reference to avoid it being garbage collected. If the event loop closes and a task is still pending, a message will be printed to the console.

Note

If execution of keyword cannot continue for some reason, for example a signal stop, Robot Framework will cancel the async task and any of its children. Other async tasks will continue running normally.

4.1.4   Communicating with Robot Framework

After a method implementing a keyword is called, it can use any mechanism to communicate with the system under test. It can then also send messages to Robot Framework's log file, return information that can be saved to variables and, most importantly, report if the keyword passed or not.

Reporting keyword status

Reporting keyword status is done simply using exceptions. If an executed method raises an exception, the keyword status is FAIL, and if it returns normally, the status is PASS.

Normal execution failures and errors can be reported using the standard exceptions such as AssertionError, ValueError and RuntimeError. There are, however, some special cases explained in the subsequent sections where special exceptions are needed.

Error messages

The error message shown in logs, reports and the console is created from the exception type and its message. With generic exceptions (for example, AssertionError, Exception, and RuntimeError), only the exception message is used, and with others, the message is created in the format ExceptionType: Actual message.

It is possible to avoid adding the exception type as a prefix to failure message also with non generic exceptions. This is done by adding a special ROBOT_SUPPRESS_NAME attribute with value True to your exception.

Python:

class MyError(RuntimeError):
    ROBOT_SUPPRESS_NAME = True

In all cases, it is important for the users that the exception message is as informative as possible.

HTML in error messages

It is also possible to have HTML formatted error messages by starting the message with text *HTML*:

raise AssertionError("*HTML* <a href='robotframework.org'>Robot Framework</a> rulez!!")

This method can be used both when raising an exception in a library, like in the example above, and when users provide an error message in the test data.

Cutting long messages automatically

If the error message is longer than 40 lines, it will be automatically cut from the middle to prevent reports from getting too long and difficult to read. The full error message is always shown in the log message of the failed keyword.

Tracebacks

The traceback of the exception is also logged using DEBUG log level. These messages are not visible in log files by default because they are very rarely interesting for normal users. When developing libraries, it is often a good idea to run tests using --loglevel DEBUG.

Exceptions provided by Robot Framework

Robot Framework provides some exceptions that libraries can use for reporting failures and other events. These exceptions are exposed via the robot.api package and contain the following:

Failure
Report failed validation. There is no practical difference in using this exception compared to using the standard AssertionError. The main benefit of using this exception is that its name is consistent with other provided exceptions.
Error
Report error in execution. Failures related to the system not behaving as expected should typically be reported using the Failure exception or the standard AssertionError. This exception can be used, for example, if the keyword is used incorrectly. There is no practical difference, other than consistent naming with other provided exceptions, compared to using this exception and the standard RuntimeError.
ContinuableFailure
Report failed validation but allow continuing execution. See the Continuable failures section below for more information.
SkipExecution
Mark the executed test or task skipped. See the Skipping tests section below for more information.
FatalError
Report error that stops the whole execution. See the Stopping test execution section below for more information.

Note

All these exceptions are new in Robot Framework 4.0. Other features than skipping tests, which is also new in Robot Framework 4.0, are available by other means in earlier versions.

Continuable failures

It is possible to continue test execution even when there are failures. The easiest way to do that is using the provided robot.api.ContinuableFailure exception:

from robot.api import ContinuableFailure


def example_keyword():
    if something_is_wrong():
        raise ContinuableFailure('Something is wrong but execution can continue.')
    ...

An alternative is creating a custom exception that has a special ROBOT_CONTINUE_ON_FAILURE attribute set to a True value. This is demonstrated by the example below.

class MyContinuableError(RuntimeError):
    ROBOT_CONTINUE_ON_FAILURE = True

Skipping tests

It is possible to skip tests with a library keyword. The easiest way to do that is using the provided robot.api.SkipExecution exception:

from robot.api import SkipExecution


def example_keyword():
    if test_should_be_skipped():
        raise SkipExecution('Cannot proceed, skipping test.')
    ...

An alternative is creating a custom exception that has a special ROBOT_SKIP_EXECUTION attribute set to a True value. This is demonstrated by the example below.

class MySkippingError(RuntimeError):
    ROBOT_SKIP_EXECUTION = True

Stopping test execution

It is possible to fail a test case so that the whole test execution is stopped. The easiest way to accomplish this is using the provided robot.api.FatalError exception:

from robot.api import FatalError


def example_keyword():
    if system_is_not_running():
        raise FatalError('System is not running!')
    ...

In addition to using the robot.api.FatalError exception, it is possible create a custom exception that has a special ROBOT_EXIT_ON_FAILURE attribute set to a True value. This is illustrated by the example below.

class MyFatalError(RuntimeError):
    ROBOT_EXIT_ON_FAILURE = True

Logging information

Exception messages are not the only way to give information to the users. In addition to them, methods can also send messages to log files simply by writing to the standard output stream (stdout) or to the standard error stream (stderr), and they can even use different log levels. Another, and often better, logging possibility is using the programmatic logging APIs.

By default, everything written by a method into the standard output is written to the log file as a single entry with the log level INFO. Messages written into the standard error are handled similarly otherwise, but they are echoed back to the original stderr after the keyword execution has finished. It is thus possible to use the stderr if you need some messages to be visible on the console where tests are executed.

Using log levels

To use other log levels than INFO, or to create several messages, specify the log level explicitly by embedding the level into the message in the format *LEVEL* Actual log message. In this formant *LEVEL* must be in the beginning of a line and LEVEL must be one of the available concrete log levels TRACE, DEBUG, INFO, WARN or ERROR, or a pseudo log level HTML or CONSOLE. The pseudo levels can be used for logging HTML and logging to console, respectively.

Errors and warnings

Messages with ERROR or WARN level are automatically written to the console and a separate Test Execution Errors section in the log files. This makes these messages more visible than others and allows using them for reporting important but non-critical problems to users.

Logging HTML

Everything normally logged by the library will be converted into a format that can be safely represented as HTML. For example, <b>foo</b> will be displayed in the log exactly like that and not as foo. If libraries want to use formatting, links, display images and so on, they can use a special pseudo log level HTML. Robot Framework will write these messages directly into the log with the INFO level, so they can use any HTML syntax they want. Notice that this feature needs to be used with care, because, for example, one badly placed </table> tag can ruin the log file quite badly.

When using the public logging API, various logging methods have optional html attribute that can be set to True to enable logging in HTML format.

Timestamps

By default messages logged via the standard output or error streams get their timestamps when the executed keyword ends. This means that the timestamps are not accurate and debugging problems especially with longer running keywords can be problematic.

Keywords have a possibility to add an accurate timestamp to the messages they log if there is a need. The timestamp must be given as milliseconds since the Unix epoch and it must be placed after the log level separated from it with a colon:

*INFO:1308435758660* Message with timestamp
*HTML:1308435758661* <b>HTML</b> message with timestamp

As illustrated by the examples below, adding the timestamp is easy. It is, however, even easier to get accurate timestamps using the programmatic logging APIs. A big benefit of adding timestamps explicitly is that this approach works also with the remote library interface.

import time


def example_keyword():
    print('*INFO:%d* Message with timestamp' % (time.time()*1000))
Logging to console

Libraries have several options for writing messages to the console. As already discussed, warnings and all messages written to the standard error stream are written both to the log file and to the console. Both of these options have a limitation that the messages end up to the console only after the currently executing keyword finishes.

Starting from Robot Framework 6.1, libraries can use a pseudo log level CONSOLE for logging messages both to the log file and to the console:

def my_keyword(arg):
    print('*CONSOLE* Message both to log and to console.')

These messages will be logged to the log file using the INFO level similarly as with the HTML pseudo log level. When using this approach, messages are logged to the console only after the keyword execution ends.

Another option is writing messages to sys.__stdout__ or sys.__stderr__. When using this approach, messages are written to the console immediately and are not written to the log file at all:

import sys


def my_keyword(arg):
    print('Message only to console.', file=sys.__stdout__)

The final option is using the public logging API. Also in with this approach messages are written to the console immediately:

from robot.api import logger


def log_to_console(arg):
    logger.console('Message only to console.')

def log_to_console_and_log_file(arg):
    logger.info('Message both to log and to console.', also_console=True)
Logging example

In most cases, the INFO level is adequate. The levels below it, DEBUG and TRACE, are useful for writing debug information. These messages are normally not shown, but they can facilitate debugging possible problems in the library itself. The WARN or ERROR level can be used to make messages more visible and HTML is useful if any kind of formatting is needed. Level CONSOLE can be used when the message needs to shown both in console and in the log file.

The following examples clarify how logging with different levels works.

print('Hello from a library.')
print('*WARN* Warning from a library.')
print('*ERROR* Something unexpected happen that may indicate a problem in the test.')
print('*INFO* Hello again!')
print('This will be part of the previous message.')
print('*INFO* This is a new message.')
print('*INFO* This is <b>normal text</b>.')
print('*CONSOLE* This logs into console and log file.')
print('*HTML* This is <b>bold</b>.')
print('*HTML* <a href="http://robotframework.org">Robot Framework</a>')
16:18:42.123 INFO Hello from a library.
16:18:42.123 WARN Warning from a library.
16:18:42.123 ERROR Something unexpected happen that may indicate a problem in the test.
16:18:42.123 INFO Hello again!
This will be part of the previous message.
16:18:42.123 INFO This is a new message.
16:18:42.123 INFO This is <b>normal text</b>.
16:18:42.123 INFO This logs into console and log file.
16:18:42.123 INFO This is bold.
16:18:42.123 INFO Robot Framework

Programmatic logging APIs

Programmatic APIs provide somewhat cleaner way to log information than using the standard output and error streams.

Public logging API

Robot Framework has a Python based logging API for writing messages to the log file and to the console. Test libraries can use this API like logger.info('My message') instead of logging through the standard output like print('*INFO* My message'). In addition to a programmatic interface being a lot cleaner to use, this API has a benefit that the log messages have accurate timestamps.

The public logging API is thoroughly documented as part of the API documentation at https://robot-framework.readthedocs.org. Below is a simple usage example:

from robot.api import logger


def my_keyword(arg):
    logger.debug('Got argument %s' % arg)
    do_something()
    logger.info('<i>This</i> is a boring example', html=True)
    logger.console('Hello, console!')

An obvious limitation is that test libraries using this logging API have a dependency to Robot Framework. If Robot Framework is not running, the messages are redirected automatically to Python's standard logging module.

Using Python's standard logging module

In addition to the new public logging API, Robot Framework offers a built-in support to Python's standard logging module. This works so that all messages that are received by the root logger of the module are automatically propagated to Robot Framework's log file. Also this API produces log messages with accurate timestamps, but logging HTML messages or writing messages to the console are not supported. A big benefit, illustrated also by the simple example below, is that using this logging API creates no dependency to Robot Framework.

import logging


def my_keyword(arg):
    logging.debug('Got argument %s' % arg)
    do_something()
    logging.info('This is a boring example')

The logging module has slightly different log levels than Robot Framework. Its levels DEBUG, INFO, WARNING and ERROR are mapped directly to the matching Robot Framework log levels, and CRITICAL is mapped to ERROR. Custom log levels are mapped to the closest standard level smaller than the custom level. For example, a level between INFO and WARNING is mapped to Robot Framework's INFO level.

Logging during library initialization

Libraries can also log during the test library import and initialization. These messages do not appear in the log file like the normal log messages, but are instead written to the syslog. This allows logging any kind of useful debug information about the library initialization. Messages logged using the WARN or ERROR levels are also visible in the test execution errors section in the log file.

Logging during the import and initialization is possible both using the standard output and error streams and the programmatic logging APIs. Both of these are demonstrated below.

Library logging using the logging API during import:

from robot.api import logger


logger.debug("Importing library")


def keyword():
    # ...

Note

If you log something during initialization, i.e. in Python __init__, the messages may be logged multiple times depending on the library scope.

Returning values

The final way for keywords to communicate back to the core framework is returning information retrieved from the system under test or generated by some other means. The returned values can be assigned to variables in the test data and then used as inputs for other keywords, even from different test libraries.

Values are returned using the return statement in methods. Normally, one value is assigned into one scalar variable, as illustrated in the example below. This example also illustrates that it is possible to return any objects and to use extended variable syntax to access object attributes.

from mymodule import MyObject


def return_string():
    return "Hello, world!"

def return_object(name):
    return MyObject(name)
*** Test Cases ***
Returning one value
    ${string} =    Return String
    Should Be Equal    ${string}    Hello, world!
    ${object} =    Return Object    Robot
    Should Be Equal    ${object.name}    Robot

Keywords can also return values so that they can be assigned into several scalar variables at once, into a list variable, or into scalar variables and a list variable. All these usages require that returned values are lists or list-like objects.

def return_two_values():
    return 'first value', 'second value'

def return_multiple_values():
    return ['a', 'list', 'of', 'strings']
*** Test Cases ***
Returning multiple values
    ${var1}    ${var2} =    Return Two Values
    Should Be Equal    ${var1}    first value
    Should Be Equal    ${var2}    second value
    @{list} =    Return Two Values
    Should Be Equal    @{list}[0]    first value
    Should Be Equal    @{list}[1]    second value
    ${s1}    ${s2}    @{li} =    Return Multiple Values
    Should Be Equal    ${s1} ${s2}    a list
    Should Be Equal    @{li}[0] @{li}[1]    of strings

Detecting is Robot Framework running

Starting from Robot Framework 6.1, it is easy to detect is Robot Framework running at all and is the dry-run mode active by using the robot_running and dry_run_active properties of the BuiltIn library. A relatively common use case is that library initializers may want to avoid doing some work if the library is not used during execution but is initialized, for example, by Libdoc:

from robot.libraries.BuiltIn import BuiltIn


class MyLibrary:

    def __init__(self):
        builtin = BuiltIn()
        if builtin.robot_running and not builtin.dry_run_active:
            # Do some initialization that only makes sense during real execution.

For more information about using the BuiltIn library as a programmatic API, including another example using robot_running, see the Using BuiltIn library section.

Communication when using threads

If a library uses threads, it should generally communicate with the framework only from the main thread. If a worker thread has, for example, a failure to report or something to log, it should pass the information first to the main thread, which can then use exceptions or other mechanisms explained in this section for communication with the framework.

This is especially important when threads are run on background while other keywords are running. Results of communicating with the framework in that case are undefined and can in the worst case cause a crash or a corrupted output file. If a keyword starts something on background, there should be another keyword that checks the status of the worker thread and reports gathered information accordingly.

Messages logged by non-main threads using the normal logging methods from programmatic logging APIs are silently ignored.

There is also a BackgroundLogger in separate robotbackgroundlogger project, with a similar API as the standard robot.api.logger. Normal logging methods will ignore messages from other than main thread, but the BackgroundLogger will save the background messages so that they can be later logged to Robot's log.

4.1.5   Distributing test libraries

Documenting libraries

A test library without documentation about what keywords it contains and what those keywords do is rather useless. To ease maintenance, it is highly recommended that library documentation is included in the source code and generated from it. Basically, that means using docstrings as in the example below.

class MyLibrary:
    """This is an example library with some documentation."""

    def keyword_with_short_documentation(self, argument):
        """This keyword has only a short documentation"""
        pass

    def keyword_with_longer_documentation(self):
        """First line of the documentation is here.

        Longer documentation continues here and it can contain
        multiple lines or paragraphs.
        """
        pass

Python has tools for creating an API documentation of a library documented as above. However, outputs from these tools can be slightly technical for some users. Another alternative is using Robot Framework's own documentation tool Libdoc. This tool can create a library documentation from libraries using the static library API, such as the ones above, but it also handles libraries using the dynamic library API and hybrid library API.

The first logical line of a keyword documentation, until the first empty line, is used for a special purpose and should contain a short overall description of the keyword. It is used as a short documentation by Libdoc (for example, as a tool tip) and also shown in the test logs.

By default documentation is considered to follow Robot Framework's documentation formatting rules. This simple format allows often used styles like *bold* and _italic_, tables, lists, links, etc. It is possible to use also HTML, plain text and reStructuredText formats. See the Documentation format section for information how to set the format in the library source code and Libdoc chapter for more information about the formats in general.

Note

Prior to Robot Framework 3.1, the short documentation contained only the first physical line of the keyword documentation.

Testing libraries

Any non-trivial test library needs to be thoroughly tested to prevent bugs in them. Of course, this testing should be automated to make it easy to rerun tests when libraries are changed.

Python has excellent unit testing tools, and they suite very well for testing libraries. There are no major differences in using them for this purpose compared to using them for some other testing. The developers familiar with these tools do not need to learn anything new, and the developers not familiar with them should learn them anyway.

It is also easy to use Robot Framework itself for testing libraries and that way have actual end-to-end acceptance tests for them. There are plenty of useful keywords in the BuiltIn library for this purpose. One worth mentioning specifically is Run Keyword And Expect Error, which is useful for testing that keywords report errors correctly.

Whether to use a unit- or acceptance-level testing approach depends on the context. If there is a need to simulate the actual system under test, it is often easier on the unit level. On the other hand, acceptance tests ensure that keywords do work through Robot Framework. If you cannot decide, of course it is possible to use both the approaches.

Packaging libraries

After a library is implemented, documented, and tested, it still needs to be distributed to the users. With simple libraries consisting of a single file, it is often enough to ask the users to copy that file somewhere and set the module search path accordingly. More complicated libraries should be packaged to make the installation easier.

Since libraries are normal programming code, they can be packaged using normal packaging tools. For information about packaging and distributing Python code see https://packaging.python.org/. When such a package is installed using pip or other tools, it is automatically in the module search path.

Deprecating keywords

Sometimes there is a need to replace existing keywords with new ones or remove them altogether. Just informing the users about the change may not always be enough, and it is more efficient to get warnings at runtime. To support that, Robot Framework has a capability to mark keywords deprecated. This makes it easier to find old keywords from the test data and remove or replace them.

Keywords can be deprecated by starting their documentation with text *DEPRECATED, case-sensitive, and having a closing * also on the first line of the documentation. For example, *DEPRECATED*, *DEPRECATED.*, and *DEPRECATED in version 1.5.* are all valid markers.

When a deprecated keyword is executed, a deprecation warning is logged and the warning is shown also in the console and the Test Execution Errors section in log files. The deprecation warning starts with text Keyword '<name>' is deprecated. and has rest of the short documentation after the deprecation marker, if any, afterwards. For example, if the following keyword is executed, there will be a warning like shown below in the log file.

def example_keyword(argument):
    """*DEPRECATED!!* Use keyword `Other Keyword` instead.

    This keyword does something to given ``argument`` and returns results.
    """
    return do_something(argument)
20080911 16:00:22.650 WARN Keyword 'SomeLibrary.Example Keyword' is deprecated. Use keyword `Other Keyword` instead.

This deprecation system works with most test libraries and also with user keywords.

4.1.6   Dynamic library API

The dynamic API is in most ways similar to the static API. For example, reporting the keyword status, logging, and returning values works exactly the same way. Most importantly, there are no differences in importing dynamic libraries and using their keywords compared to other libraries. In other words, users do not need to know what APIs their libraries use.

Only differences between static and dynamic libraries are how Robot Framework discovers what keywords a library implements, what arguments and documentation these keywords have, and how the keywords are actually executed. With the static API, all this is done using reflection, but dynamic libraries have special methods that are used for these purposes.

One of the benefits of the dynamic API is that you have more flexibility in organizing your library. With the static API, you must have all keywords in one class or module, whereas with the dynamic API, you can, for example, implement each keyword as a separate class. This use case is not so important with Python, though, because its dynamic capabilities and multi-inheritance already give plenty of flexibility, and there is also possibility to use the hybrid library API.

Another major use case for the dynamic API is implementing a library so that it works as proxy for an actual library possibly running on some other process or even on another machine. This kind of a proxy library can be very thin, and because keyword names and all other information is got dynamically, there is no need to update the proxy when new keywords are added to the actual library.

This section explains how the dynamic API works between Robot Framework and dynamic libraries. It does not matter for Robot Framework how these libraries are actually implemented (for example, how calls to the run_keyword method are mapped to a correct keyword implementation), and many different approaches are possible. Python users may also find the PythonLibCore project useful.

Getting keyword names

Dynamic libraries tell what keywords they implement with the get_keyword_names method. This method cannot take any arguments, and it must return a list or array of strings containing the names of the keywords that the library implements.

If the returned keyword names contain several words, they can be returned separated with spaces or underscores, or in the camelCase format. For example, ['first keyword', 'second keyword'], ['first_keyword', 'second_keyword'], and ['firstKeyword', 'secondKeyword'] would all be mapped to keywords First Keyword and Second Keyword.

Dynamic libraries must always have this method. If it is missing, or if calling it fails for some reason, the library is considered a static library.

Marking methods to expose as keywords

If a dynamic library should contain both methods which are meant to be keywords and methods which are meant to be private helper methods, it may be wise to mark the keyword methods as such so it is easier to implement get_keyword_names. The robot.api.deco.keyword decorator allows an easy way to do this since it creates a custom 'robot_name' attribute on the decorated method. This allows generating the list of keywords just by checking for the robot_name attribute on every method in the library during get_keyword_names.

from robot.api.deco import keyword


class DynamicExample:

    def get_keyword_names(self):
        # Get all attributes and their values from the library.
        attributes = [(name, getattr(self, name)) for name in dir(self)]
        # Filter out attributes that do not have 'robot_name' set.
        keywords = [(name, value) for name, value in attributes
                    if hasattr(value, 'robot_name')]
        # Return value of 'robot_name', if given, or the original 'name'.
        return [value.robot_name or name for name, value in keywords]

    def helper_method(self):
        # ...

    @keyword
    def keyword_method(self):
        # ...

Running keywords

Dynamic libraries have a special run_keyword (alias runKeyword) method for executing their keywords. When a keyword from a dynamic library is used in the test data, Robot Framework uses the run_keyword method to get it executed. This method takes two or three arguments. The first argument is a string containing the name of the keyword to be executed in the same format as returned by get_keyword_names. The second argument is a list of positional arguments given to the keyword in the test data, and the optional third argument is a dictionary containing named arguments. If the third argument is missing, free named arguments and named-only arguments are not supported, and other named arguments are mapped to positional arguments.

Note

Prior to Robot Framework 3.1, normal named arguments were mapped to positional arguments regardless did run_keyword accept two or three arguments. The third argument only got possible free named arguments.

After getting keyword name and arguments, the library can execute the keyword freely, but it must use the same mechanism to communicate with the framework as static libraries. This means using exceptions for reporting keyword status, logging by writing to the standard output or by using the provided logging APIs, and using the return statement in run_keyword for returning something.

Every dynamic library must have both the get_keyword_names and run_keyword methods but rest of the methods in the dynamic API are optional. The example below shows a working, albeit trivial, dynamic library.

class DynamicExample:

    def get_keyword_names(self):
        return ['first keyword', 'second keyword']

    def run_keyword(self, name, args, kwargs):
        print("Running keyword '%s' with positional arguments %s and named arguments %s."
              % (name, args, kwargs))

Getting keyword arguments

If a dynamic library only implements the get_keyword_names and run_keyword methods, Robot Framework does not have any information about the arguments that the implemented keywords accept. For example, both First Keyword and Second Keyword in the example above could be used with any arguments. This is problematic, because most real keywords expect a certain number of keywords, and under these circumstances they would need to check the argument counts themselves.

Dynamic libraries can communicate what arguments their keywords expect by using the get_keyword_arguments (alias getKeywordArguments) method. This method gets the name of a keyword as an argument, and it must return a list of strings containing the arguments accepted by that keyword.

Similarly as other keywords, dynamic keywords can require any number of positional arguments, have default values, accept variable number of arguments, accept free named arguments and have named-only arguments. The syntax how to represent all these different variables is derived from how they are specified in Python and explained in the following table.

Representing different arguments with get_keyword_arguments
Argument type How to represent Examples
No arguments Empty list.
[]
One or more positional argument List of strings containing argument names.
['argument']
['arg1', 'arg2', 'arg3']
Default values

Two ways how to represent the argument name and the default value:

  • As a string where the name and the default are separated with =.
  • As a tuple with the name and the default as separate items. New in Robot Framework 3.2.

String with = separator:

['name=default']
['a', 'b=1', 'c=2']

Tuple:

[('name', 'default')]
['a', ('b', 1), ('c', 2)]
Positional-only arguments Arguments before the / marker. New in Robot Framework 6.1.
['posonly', '/']
['p', 'q', '/', 'normal']
Variable number of arguments (varargs) Argument after possible positional arguments has a * prefix
['*varargs']
['argument', '*rest']
['a', 'b=42', '*c']
Named-only arguments Arguments after varargs or a lone * if there are no varargs. With or without defaults. Requires run_keyword to support named-only arguments. New in Robot Framework 3.1.
['*varargs', 'named']
['*', 'named']
['*', 'x', 'y=default']
['a', '*b', ('c', 42)]
Free named arguments (kwargs) Last arguments has ** prefix. Requires run_keyword to support free named arguments.
['**named']
['a', ('b', 42), '**c']
['*varargs', '**kwargs']
['*', 'kwo', '**kws']

When the get_keyword_arguments is used, Robot Framework automatically calculates how many positional arguments the keyword requires and does it support free named arguments or not. If a keyword is used with invalid arguments, an error occurs and run_keyword is not even called.

The actual argument names and default values that are returned are also important. They are needed for named argument support and the Libdoc tool needs them to be able to create a meaningful library documentation.

As explained in the above table, default values can be specified with argument names either as a string like 'name=default' or as a tuple like ('name', 'default'). The main problem with the former syntax is that all default values are considered strings whereas the latter syntax allows using all objects like ('inteter', 1) or ('boolean', True). When using other objects than strings, Robot Framework can do automatic argument conversion based on them.

For consistency reasons, also arguments that do not accept default values can be specified as one item tuples. For example, ['a', 'b=c', '*d'] and [('a',), ('b', 'c'), ('*d',)] are equivalent.

If get_keyword_arguments is missing or returns Python None for a certain keyword, that keyword gets an argument specification accepting all arguments. This automatic argument spec is either [*varargs, **kwargs] or [*varargs], depending does run_keyword support free named arguments or not.

Note

Support to specify arguments as tuples like ('name', 'default') is new in Robot Framework 3.2. Support for positional-only arguments in dynamic library API is new in Robot Framework 6.1.

Getting keyword argument types

Robot Framework 3.1 introduced support for automatic argument conversion and the dynamic library API supports that as well. The conversion logic works exactly like with static libraries, but how the type information is specified is naturally different.

With dynamic libraries types can be returned using the optional get_keyword_types method (alias getKeywordTypes). It can return types using a list or a dictionary exactly like types can be specified when using the @keyword decorator. Type information can be specified using actual types like int, but especially if a dynamic library gets this information from external systems, using strings like 'int' or 'integer' may be easier. See the Supported conversions section for more information about supported types and how to specify them.

Robot Framework does automatic argument conversion also based on the argument default values. Earlier this did not work with the dynamic API because it was possible to specify arguments only as strings. As discussed in the previous section, this was changed in Robot Framework 3.2 and nowadays default values returned like ('example', True) are automatically used for this purpose.

Starting from Robot Framework 7.0, dynamic libraries can also specify the keyword return type by using key 'return' with an appropriate type in the returned type dictionary. This information is not used for anything during execution, but it is shown by Libdoc for documentation purposes.

Getting keyword tags

Dynamic libraries can report keyword tags by using the get_keyword_tags method (alias getKeywordTags). It gets a keyword name as an argument, and should return corresponding tags as a list of strings.

Alternatively it is possible to specify tags on the last row of the documentation returned by the get_keyword_documentation method discussed below. This requires starting the last row with Tags: and listing tags after it like Tags: first tag, second, third.

Tip

The get_keyword_tags method is guaranteed to be called before the get_keyword_documentation method. This makes it easy to embed tags into the documentation only if the get_keyword_tags method is not called.

Getting keyword documentation

If dynamic libraries want to provide keyword documentation, they can implement the get_keyword_documentation method (alias getKeywordDocumentation). It takes a keyword name as an argument and, as the method name implies, returns its documentation as a string.

The returned documentation is used similarly as the keyword documentation string with static libraries. The main use case is getting keywords' documentations into a library documentation generated by Libdoc. Additionally, the first line of the documentation (until the first \n) is shown in test logs.

Getting general library documentation

The get_keyword_documentation method can also be used for specifying overall library documentation. This documentation is not used when tests are executed, but it can make the documentation generated by Libdoc much better.

Dynamic libraries can provide both general library documentation and documentation related to taking the library into use. The former is got by calling get_keyword_documentation with special value __intro__, and the latter is got using value __init__. How the documentation is presented is best tested with Libdoc in practice.

Dynamic libraries can also specify the general library documentation directly in the code as the docstring of the library class and its __init__ method. If a non-empty documentation is got both directly from the code and from the get_keyword_documentation method, the latter has precedence.

Getting keyword source information

The dynamic API masks the real implementation of keywords from Robot Framework and thus makes it impossible to see where keywords are implemented. This means that editors and other tools utilizing Robot Framework APIs cannot implement features such as go-to-definition. This problem can be solved by implementing yet another optional dynamic method named get_keyword_source (alias getKeywordSource) that returns the source information.

The return value from the get_keyword_source method must be a string or None if no source information is available. In the simple case it is enough to simply return an absolute path to the file implementing the keyword. If the line number where the keyword implementation starts is known, it can be embedded to the return value like path:lineno. Returning only the line number is possible like :lineno.

The source information of the library itself is got automatically from the imported library class the same way as with other library APIs. The library source path is used with all keywords that do not have their own source path defined.

Note

Returning source information for keywords is a new feature in Robot Framework 3.2.

Named argument syntax with dynamic libraries

Also the dynamic library API supports the named argument syntax. Using the syntax works based on the argument names and default values got from the library using the get_keyword_arguments method.

If the run_keyword method accepts three arguments, the second argument gets all positional arguments as a list and the last arguments gets all named arguments as a mapping. If it accepts only two arguments, named arguments are mapped to positional arguments. In the latter case, if a keyword has multiple arguments with default values and only some of the latter ones are given, the framework fills the skipped optional arguments based on the default values returned by the get_keyword_arguments method.

Using the named argument syntax with dynamic libraries is illustrated by the following examples. All the examples use a keyword Dynamic that has an argument specification [a, b=d1, c=d2]. The comment on each row shows how run_keyword would be called in these cases if it has two arguments (i.e. signature is name, args) and if it has three arguments (i.e. name, args, kwargs).

*** Test Cases ***                  # args          # args, kwargs
Positional only
    Dynamic    x                    # [x]           # [x], {}
    Dynamic    x      y             # [x, y]        # [x, y], {}
    Dynamic    x      y      z      # [x, y, z]     # [x, y, z], {}

Named only
    Dynamic    a=x                  # [x]           # [], {a: x}
    Dynamic    c=z    a=x    b=y    # [x, y, z]     # [], {a: x, b: y, c: z}

Positional and named
    Dynamic    x      b=y           # [x, y]        # [x], {b: y}
    Dynamic    x      y      c=z    # [x, y, z]     # [x, y], {c: z}
    Dynamic    x      b=y    c=z    # [x, y, z]     # [x], {y: b, c: z}

Intermediate missing
    Dynamic    x      c=z           # [x, d1, z]    # [x], {c: z}

Note

Prior to Robot Framework 3.1, all normal named arguments were mapped to positional arguments and the optional kwargs was only used with free named arguments. With the above examples run_keyword was always called like it is nowadays called if it does not support kwargs.

Free named arguments with dynamic libraries

Dynamic libraries can also support free named arguments (**named). A mandatory precondition for this support is that the run_keyword method takes three arguments: the third one will get the free named arguments along with possible other named arguments. These arguments are passed to the keyword as a mapping.

What arguments a keyword accepts depends on what get_keyword_arguments returns for it. If the last argument starts with **, that keyword is recognized to accept free named arguments.

Using the free named argument syntax with dynamic libraries is illustrated by the following examples. All the examples use a keyword Dynamic that has an argument specification [a=d1, b=d2, **named]. The comment shows the arguments that the run_keyword method is actually called with.

*** Test Cases ***                  # args, kwargs
No arguments
    Dynamic                         # [], {}

Only positional
    Dynamic    x                    # [x], {}
    Dynamic    x      y             # [x, y], {}

Only free named
    Dynamic    x=1                  # [], {x: 1}
    Dynamic    x=1    y=2    z=3    # [], {x: 1, y: 2, z: 3}

Positional and free named
    Dynamic    x      y=2           # [x], {y: 2}
    Dynamic    x      y=2    z=3    # [x], {y: 2, z: 3}

Positional as named and free named
    Dynamic    a=1    x=1           # [], {a: 1, x: 1}
    Dynamic    b=2    x=1    a=1    # [], {a: 1, b: 2, x: 1}

Note

Prior to Robot Framework 3.1, normal named arguments were mapped to positional arguments but nowadays they are part of the kwargs along with the free named arguments.

Named-only arguments with dynamic libraries

Starting from Robot Framework 3.1, dynamic libraries can have named-only arguments. This requires that the run_keyword method takes three arguments: the third getting the named-only arguments along with the other named arguments.

In the argument specification returned by the get_keyword_arguments method named-only arguments are specified after possible variable number of arguments (*varargs) or a lone asterisk (*) if the keyword does not accept varargs. Named-only arguments can have default values, and the order of arguments with and without default values does not matter.

Using the named-only argument syntax with dynamic libraries is illustrated by the following examples. All the examples use a keyword Dynamic that has been specified to have argument specification [positional=default, *varargs, named, named2=default, **free]. The comment shows the arguments that the run_keyword method is actually called with.

*** Test Cases ***                                  # args, kwargs
Only named-only
    Dynamic    named=value                          # [], {named: value}
    Dynamic    named=value    named2=2              # [], {named: value, named2: 2}

Named-only with positional and varargs
    Dynamic    argument       named=xxx             # [argument], {named: xxx}
    Dynamic    a1             a2         named=3    # [a1, a2], {named: 3}

Named-only with positional as named
    Dynamic    named=foo      positional=bar        # [], {positional: bar, named: foo}

Named-only with free named
    Dynamic    named=value    foo=bar               # [], {named: value, foo=bar}
    Dynamic    named2=2       third=3    named=1    # [], {named: 1, named2: 2, third: 3}

Summary

All special methods in the dynamic API are listed in the table below. Method names are listed in the underscore format, but their camelCase aliases work exactly the same way.

All special methods in the dynamic API
Name Arguments Purpose
get_keyword_names   Return names of the implemented keywords.
run_keyword name, arguments, kwargs Execute the specified keyword with given arguments. kwargs is optional.
get_keyword_arguments name Return keywords' argument specification. Optional method.
get_keyword_types name Return keywords' argument type information. Optional method. New in RF 3.1.
get_keyword_tags name Return keywords' tags. Optional method.
get_keyword_documentation name Return keywords' and library's documentation. Optional method.
get_keyword_source name Return keywords' source. Optional method. New in RF 3.2.

A good example of using the dynamic API is Robot Framework's own Remote library.

Note

Starting from Robot Framework 7.0, dynamic libraries can have asynchronous implementations of their special methods.

4.1.7   Hybrid library API

The hybrid library API is, as its name implies, a hybrid between the static API and the dynamic API. Just as with the dynamic API, it is possible to implement a library using the hybrid API only as a class.

Getting keyword names

Keyword names are got in the exactly same way as with the dynamic API. In practice, the library needs to have the get_keyword_names or getKeywordNames method returning a list of keyword names that the library implements.

Running keywords

In the hybrid API, there is no run_keyword method for executing keywords. Instead, Robot Framework uses reflection to find methods implementing keywords, similarly as with the static API. A library using the hybrid API can either have those methods implemented directly or, more importantly, it can handle them dynamically.

In Python, it is easy to handle missing methods dynamically with the __getattr__ method. This special method is probably familiar to most Python programmers and they can immediately understand the following example. Others may find it easier to consult Python Reference Manual first.

from somewhere import external_keyword


class HybridExample:

    def get_keyword_names(self):
        return ['my_keyword', 'external_keyword']

    def my_keyword(self, arg):
        print("My Keyword called with '%s'" % arg)

    def __getattr__(self, name):
        if name == 'external_keyword':
            return external_keyword
        raise AttributeError("Non-existing attribute '%s'" % name)

Note that __getattr__ does not execute the actual keyword like run_keyword does with the dynamic API. Instead, it only returns a callable object that is then executed by Robot Framework.

Another point to be noted is that Robot Framework uses the same names that are returned from get_keyword_names for finding the methods implementing them. Thus the names of the methods that are implemented in the class itself must be returned in the same format as they are defined. For example, the library above would not work correctly, if get_keyword_names returned My Keyword instead of my_keyword.

Getting keyword arguments and documentation

When this API is used, Robot Framework uses reflection to find the methods implementing keywords, similarly as with the static API. After getting a reference to the method, it searches for arguments and documentation from it, in the same way as when using the static API. Thus there is no need for special methods for getting arguments and documentation like there is with the dynamic API.

Summary

When implementing a test library, the hybrid API has the same dynamic capabilities as the actual dynamic API. A great benefit with it is that there is no need to have special methods for getting keyword arguments and documentation. It is also often practical that the only real dynamic keywords need to be handled in __getattr__ and others can be implemented directly in the main library class.

Because of the clear benefits and equal capabilities, the hybrid API is in most cases a better alternative than the dynamic API. One notable exception is implementing a library as a proxy for an actual library implementation elsewhere, because then the actual keyword must be executed elsewhere and the proxy can only pass forward the keyword name and arguments.

A good example of using the hybrid API is Robot Framework's own Telnet library.

4.1.8   Using Robot Framework's internal modules

Test libraries can use Robot Framework's internal modules, for example, to get information about the executed tests and the settings that are used. This powerful mechanism to communicate with the framework should be used with care, though, because all Robot Framework's APIs are not meant to be used by externally and they might change radically between different framework versions.

Available APIs

API documentation is hosted separately at the excellent Read the Docs service. If you are unsure how to use certain API or is using them forward compatible, please send a question to mailing list.

Using BuiltIn library

The safest API to use are methods implementing keywords in the BuiltIn library. Changes to keywords are rare and they are always done so that old usage is first deprecated. One of the most useful methods is replace_variables which allows accessing currently available variables. The following example demonstrates how to get ${OUTPUT_DIR} which is one of the many handy automatic variables. It is also possible to set new variables from libraries using set_test_variable, set_suite_variable and set_global_variable.

import os.path
from robot.libraries.BuiltIn import BuiltIn


def do_something(argument):
    builtin = BuiltIn()
    output = do_something_that_creates_a_lot_of_output(argument)
    if builtin.robot_running:
        output_dir = builtin.replace_variables('${OUTPUT_DIR}')
    else:
        output_dir = '.'
    with open(os.path.join(output_dir, 'output.txt'), 'w') as file:
        file.write(output)
    print('*HTML* Output written to <a href="output.txt">output.txt</a>')

As the above examples illustrates, BuiltIn also has a convenient robot_running property for detecting is Robot Framework running.

The only catch with using methods from BuiltIn is that all run_keyword method variants must be handled specially. Methods that use run_keyword methods have to be registered as run keywords themselves using register_run_keyword method in BuiltIn module. This method's documentation explains why this needs to be done and obviously also how to do it.

4.1.9   Extending existing test libraries

This section explains different approaches how to add new functionality to existing test libraries and how to use them in your own libraries otherwise.

Modifying original source code

If you have access to the source code of the library you want to extend, you can naturally modify the source code directly. The biggest problem of this approach is that it can be hard for you to update the original library without affecting your changes. For users it may also be confusing to use a library that has different functionality than the original one. Repackaging the library may also be a big extra task.

This approach works extremely well if the enhancements are generic and you plan to submit them back to the original developers. If your changes are applied to the original library, they are included in the future releases and all the problems discussed above are mitigated. If changes are non-generic, or you for some other reason cannot submit them back, the approaches explained in the subsequent sections probably work better.

Using inheritance

Another straightforward way to extend an existing library is using inheritance. This is illustrated by the example below that adds new Title Should Start With keyword to the SeleniumLibrary.

from SeleniumLibrary import SeleniumLibrary
from SeleniumLibrary.base import keyword


class ExtendedSeleniumLibrary(SeleniumLibrary):

    @keyword
    def title_should_start_with(self, expected):
        title = self.get_title()
        if not title.startswith(expected):
            raise AssertionError("Title '%s' did not start with '%s'"
                                 % (title, expected))

A big difference with this approach compared to modifying the original library is that the new library has a different name than the original. A benefit is that you can easily tell that you are using a custom library, but a big problem is that you cannot easily use the new library with the original. First of all your new library will have same keywords as the original meaning that there is always conflict. Another problem is that the libraries do not share their state.

This approach works well when you start to use a new library and want to add custom enhancements to it from the beginning. Otherwise other mechanisms explained in this section are probably better.

Using other libraries directly

Because test libraries are technically just classes or modules, a simple way to use another library is importing it and using its methods. This approach works great when the methods are static and do not depend on the library state. This is illustrated by the earlier example that uses Robot Framework's BuiltIn library.

If the library has state, however, things may not work as you would hope. The library instance you use in your library will not be the same as the framework uses, and thus changes done by executed keywords are not visible to your library. The next section explains how to get an access to the same library instance that the framework uses.

Getting active library instance from Robot Framework

BuiltIn keyword Get Library Instance can be used to get the currently active library instance from the framework itself. The library instance returned by this keyword is the same as the framework itself uses, and thus there is no problem seeing the correct library state. Although this functionality is available as a keyword, it is typically used in test libraries directly by importing the BuiltIn library class as discussed earlier. The following example illustrates how to implement the same Title Should Start With keyword as in the earlier example about using inheritance.

from robot.libraries.BuiltIn import BuiltIn


def title_should_start_with(expected):
    seleniumlib = BuiltIn().get_library_instance('SeleniumLibrary')
    title = seleniumlib.get_title()
    if not title.startswith(expected):
        raise AssertionError("Title '%s' did not start with '%s'"
                             % (title, expected))

This approach is clearly better than importing the library directly and using it when the library has a state. The biggest benefit over inheritance is that you can use the original library normally and use the new library in addition to it when needed. That is demonstrated in the example below where the code from the previous examples is expected to be available in a new library SeLibExtensions.

*** Settings ***
Library    SeleniumLibrary
Library    SeLibExtensions

*** Test Cases ***
Example
    Open Browser    http://example      # SeleniumLibrary
    Title Should Start With    Example  # SeLibExtensions

Libraries using dynamic or hybrid API

Test libraries that use the dynamic or hybrid library API often have their own systems how to extend them. With these libraries you need to ask guidance from the library developers or consult the library documentation or source code.

4.2   Remote library interface

The remote library interface provides means for having test libraries on different machines than where Robot Framework itself is running, and also for implementing libraries using other languages than the natively supported Python. For a test library, user remote libraries look pretty much the same as any other test library, and developing test libraries using the remote library interface is also very close to creating normal test libraries.

4.2.1   Introduction

There are two main reasons for using the remote library API:

  • It is possible to have actual libraries on different machines than where Robot Framework is running. This allows interesting possibilities for distributed testing.
  • Test libraries can be implemented using any language that supports XML-RPC protocol. There exists ready-made generic remote servers for various languages like Python, Java, Ruby, .NET, and so on.

The remote library interface is provided by the Remote library that is one of the standard libraries. This library does not have any keywords of its own, but it works as a proxy between the core framework and keywords implemented elsewhere. The Remote library interacts with actual library implementations through remote servers, and the Remote library and servers communicate using a simple remote protocol on top of an XML-RPC channel. The high level architecture of all this is illustrated in the picture below:

src/ExtendingRobotFramework/remote.png

Robot Framework architecture with Remote library

Note

The remote client uses Python's standard XML-RPC module. It does not support custom XML-RPC extensions implemented by some XML-RPC servers.

4.2.2   Putting Remote library to use

Importing Remote library

The Remote library needs to know the address of the remote server but otherwise importing it and using keywords that it provides is no different to how other libraries are used. If you need to use the Remote library multiple times in a suite, or just want to give it a more descriptive name, you can give it an alias when importing it.

*** Settings ***
Library    Remote    http://127.0.0.1:8270       AS    Example1
Library    Remote    http://example.com:8080/    AS    Example2
Library    Remote    http://10.0.0.2/example    1 minute    AS    Example3

The URL used by the first example above is also the default address that the Remote library uses if no address is given.

The last example above shows how to give a custom timeout to the Remote library as an optional second argument. The timeout is used when initially connecting to the server and if a connection accidentally closes. Timeout can be given in Robot Framework time format like 60s or 2 minutes 10 seconds. The default timeout is typically several minutes, but it depends on the operating system and its configuration. Notice that setting a timeout that is shorter than keyword execution time will interrupt the keyword.

Note

Port 8270 is the default port that remote servers are expected to use and it has been registered by IANA for this purpose. This port number was selected because 82 and 70 are the ASCII codes of letters R and F, respectively.

Note

When connecting to the local machine, it is recommended to use IP address 127.0.0.1 instead of machine name localhost. This avoids address resolution that can be extremely slow at least on Windows.

Note

If the URI contains no path after the server address, the XML-RPC module used by the Remote library will use /RPC2 path by default. In practice using http://127.0.0.1:8270 is thus identical to using http://127.0.0.1:8270/RPC2. Depending on the remote server this may or may not be a problem. No extra path is appended if the address has a path even if the path is just /. For example, neither http://127.0.0.1:8270/ nor http://127.0.0.1:8270/my/path will be modified.

Starting and stopping remote servers

Before the Remote library can be imported, the remote server providing the actual keywords must be started. If the server is started before launching the test execution, it is possible to use the normal Library setting like in the above example. Alternatively other keywords, for example from Process or SSH libraries, can start the server up, but then you may need to use Import Library keyword because the library is not available when the test execution starts.

How a remote server can be stopped depends on how it is implemented. Typically servers support the following methods:

  • Regardless of the library used, remote servers should provide Stop Remote Server keyword that can be easily used by executed tests.
  • Remote servers should have stop_remote_server method in their XML-RPC interface.
  • Hitting Ctrl-C on the console where the server is running should stop the server.
  • The server process can be terminated using tools provided by the operating system (e.g. kill).

Note

Servers may be configured so that users cannot stop it with Stop Remote Server keyword or stop_remote_server method.

4.2.3   Supported argument and return value types

Because the XML-RPC protocol does not support all possible object types, the values transferred between the Remote library and remote servers must be converted to compatible types. This applies to the keyword arguments the Remote library passes to remote servers and to the return values servers give back to the Remote library.

Both the Remote library and the Python remote server handle Python values according to the following rules. Other remote servers should behave similarly.

  • Strings, numbers and Boolean values are passed without modifications.
  • Python None is converted to an empty string.
  • All lists, tuples, and other iterable objects (except strings and dictionaries) are passed as lists so that their contents are converted recursively.
  • Dictionaries and other mappings are passed as dicts so that their keys are converted to strings and values converted to supported types recursively.
  • Returned dictionaries are converted to so called dot-accessible dicts that allow accessing keys as attributes using the extended variable syntax like ${result.key}. This works also with nested dictionaries like ${root.child.leaf}.
  • Strings containing bytes in the ASCII range that cannot be represented in XML (e.g. the null byte) are sent as Binary objects that internally use XML-RPC base64 data type. Received Binary objects are automatically converted to byte strings.
  • Other types are converted to strings.

4.2.4   Remote protocol

This section explains the protocol that is used between the Remote library and remote servers. This information is mainly targeted for people who want to create new remote servers.

The remote protocol is implemented on top of XML-RPC, which is a simple remote procedure call protocol using XML over HTTP. Most mainstream languages (Python, Java, C, Ruby, Perl, Javascript, PHP, ...) have a support for XML-RPC either built-in or as an extension.

The Python remote server can be used as a reference implementation.

Required methods

There are two possibilities how remote servers can provide information about the keywords they contain. They are briefly explained below and documented more thoroughly in the subsequent sections.

  1. Remote servers can implement the same methods as the dynamic library API has. This means get_keyword_names method and optional get_keyword_arguments, get_keyword_types, get_keyword_tags and get_keyword_documentation methods. Notice that using "camel-case names" like getKeywordNames is not possible similarly as in the normal dynamic API.
  2. Starting from Robot Framework 4.0, remote servers can have a single get_library_information method that returns all library and keyword information as a single dictionary. If a remote server has this method, the other getter methods like get_keyword_names are not used at all. This approach has the benefit that there is only one XML-RPC call to get information while the approach explained above requires several calls per keyword. With bigger libraries the difference can be significant.

Regardless how remote servers provide information about their keywords, they must have run_keyword method that is used when keywords are executed. How the actual keywords are implemented is not relevant for the Remote library. Remote servers can either act as wrappers for the real test libraries, like the available generic remote servers do, or they can implement keywords themselves.

Remote servers should additionally have stop_remote_server method in their public interface to ease stopping them. They should also automatically expose this method as Stop Remote Server keyword to allow using it in the test data regardless of the test library. Allowing users to stop the server is not always desirable, and servers may support disabling this functionality somehow. The method, and also the exposed keyword, should return True or False depending on whether stopping is allowed or not. That makes it possible for external tools to know if stopping the server succeeded.

Using get_keyword_names and keyword specific getters

This section explains how the Remote library gets keyword names and other information when the server implements get_keyword_names. The next sections covers using the newer get_library_info method.

The get_keyword_names method must return names of the keyword the server contains as a list of strings. Remote servers can, and should, also implement get_keyword_arguments, get_keyword_types, get_keyword_tags and get_keyword_documentation methods to provide more information about the keywords. All these methods take the name of the keyword as an argument and what they must return is explained in the table below.

Keyword specific getter methods
Method Return value
get_keyword_arguments Arguments as a list of strings in the same format as with dynamic libraries.
get_keyword_types Type information as a list or dictionary of strings. See below for details.
get_keyword_documentation Documentation as a string.
get_keyword_tags Tags as a list of strings.

Type information used for argument conversion can be returned either as a list mapping type names to arguments based on position or as a dictionary mapping argument names to type names directly. In practice this works the same way as when specifying types using the @keyword decorator with normal libraries. The difference is that because the XML-RPC protocol does not support arbitrary values, type information needs to be specified using type names or aliases like 'int' or 'integer', not using actual types like int. Additionally None or null values may not be allowed by the XML-RPC server, but an empty string can be used to indicate that certain argument does not have type information instead.

Argument conversion is supported also based on default values using the same logic as with normal libraries. For this to work, arguments with default values must be returned as tuples, not as strings, the same way as with dynamic libraries. For example, argument conversion works if argument information is returned like [('count', 1), ('caseless', True)] but not if it is ['count=1', 'caseless=True'].

Remote servers can also provide general library documentation to be used when generating documentation with the Libdoc tool. This information is got by calling get_keyword_documentation with special values __intro__ and __init__.

Note

get_keyword_types is new in Robot Framework 3.1 and support for argument conversion based on defaults is new in Robot Framework 4.0.

Using get_library_information

The get_library_information method allows returning information about the whole library in one XML-RPC call. The information must be returned as a dictionary where keys are keyword names and values are nested dictionaries containing keyword information. The dictionary can also contain separate entries for generic library information.

The keyword information dictionary can contain keyword arguments, documentation, tags and types, and the respective keys are args, doc, tags and types. Information must be provided using same semantics as when get_keyword_arguments, get_keyword_documentation, get_keyword_tags and get_keyword_types discussed in the previous section. If some information is not available, it can be omitted from the info dictionary altogether.

get_library_information supports also returning general library documentation to be used with Libdoc. It is done by including special __intro__ and __init__ entries into the returned library information dictionary.

For example, a Python library like

"""Library documentation."""

from robot.api.deco import keyword

@keyword(tags=['x', 'y'])
def example(a: int, b=True):
    """Keyword documentation."""
    pass

def another():
    pass

could be mapped into this kind of library information dictionary:

{
    '__intro__': {'doc': 'Library documentation'}
    'example': {'args': ['a', 'b=True'],
                'types': ['int'],
                'doc': 'Keyword documentation.',
                'tags': ['x', 'y']}
    'another: {'args': []}
}

Note

get_library_information is new in Robot Framework 4.0.

Executing remote keywords

When the Remote library wants the server to execute some keyword, it calls the remote server's run_keyword method and passes it the keyword name, a list of arguments, and possibly a dictionary of free named arguments. Base types can be used as arguments directly, but more complex types are converted to supported types.

The server must return results of the execution in a result dictionary (or map, depending on terminology) containing items explained in the following table. Notice that only the status entry is mandatory, others can be omitted if they are not applicable.

Entries in the remote result dictionary
Name Explanation
status Mandatory execution status. Either PASS or FAIL.
output Possible output to write into the log file. Must be given as a single string but can contain multiple messages and different log levels in format *INFO* First message\n*HTML* <b>2nd</b>\n*WARN* Another message. It is also possible to embed timestamps to the log messages like *INFO:1308435758660* Message with timestamp.
return Possible return value. Must be one of the supported types.
error Possible error message. Used only when the execution fails.
traceback Possible stack trace to write into the log file using DEBUG level when the execution fails.
continuable When set to True, or any value considered True in Python, the occurred failure is considered continuable.
fatal Like continuable, but denotes that the occurred failure is fatal.

Different argument syntaxes

The Remote library is a dynamic library, and in general it handles different argument syntaxes according to the same rules as any other dynamic library. This includes mandatory arguments, default values, varargs, as well as named argument syntax.

Also free named arguments (**kwargs) works mostly the same way as with other dynamic libraries. First of all, the get_keyword_arguments must return an argument specification that contains **kwargs exactly like with any other dynamic library. The main difference is that remote servers' run_keyword method must have an optional third argument that gets the kwargs specified by the user. The third argument must be optional because, for backwards-compatibility reasons, the Remote library passes kwargs to the run_keyword method only when they have been used in the test data.

In practice run_keyword should look something like the following Python and Java examples, depending on how the language handles optional arguments.

def run_keyword(name, args, kwargs=None):
    # ...
public Map run_keyword(String name, List args) {
    // ...
}

public Map run_keyword(String name, List args, Map kwargs) {
    // ...
}

4.3   Listener interface

Robot Framework's listener interface provides a powerful mechanism for getting notifications and for inspecting and modifying data and results during execution. Listeners are called, for example, when suites, tests and keywords start and end, when output files are ready, and finally when the whole execution ends. Example usages include communicating with external test management systems, sending a message when a test fails, and modifying tests during execution.

Listeners are implemented as classes or modules with certain special methods. They can be taken into use from the command line and be registered by libraries. The former listeners are active during the whole execution while the latter are active only when executing suites where libraries registering them are imported.

There are two supported listener interface versions, listener version 2 and listener version 3. They have mostly the same methods, but these methods are called with different arguments. The newer listener version 3 is more powerful and generally recommended.

4.3.1   Listener structure

Listeners are implement as modules or classes similarly as libraries. They can implement certain named hook methods depending on what events they are interested in. For example, if a listener wants to get a notification when a test starts, it can implement the start_test method. As discussed in the subsequent sections, different listener versions have slightly different set of available methods and they also are called with different arguments.

# Listener implemented as a module using the listener API version 3.

def start_suite(data, result):
    print(f"Suite '{data.name}' starting.")

def end_test(data, result):
    print(f"Test '{result.name}' ended with status {result.status}.")

Listeners do not need to implement any explicit interface, it is enough to simply implement needed methods and they will be recognized automatically. There are, however, base classes robot.api.interfaces.ListenerV2 and robot.api.interfaces.ListenerV3 that can be used to get method name completion in editors, type hints, and so on.

# Same as the above example, but uses an optional base class and type hints.

from robot import result, running
from robot.api.interfaces import ListenerV3


class Example(ListenerV3):

    def start_suite(self, data: running.TestSuite, result: result.TestSuite):
        print(f"Suite '{data.name}' starting.")

    def end_test(self, data: running.TestCase, result: result.TestCase):
        print(f"Test '{result.name}' ended with status {result.status}.")

Note

Optional listener base classes are new in Robot Framework 6.1.

In addition to using "snake case" like start_test with listener method names, it is possible to use "camel case" like startTest. This support was added when it was possible to run Robot Framework on Jython and implement listeners using Java. It is preserved for backwards compatibility reasons, but not recommended with new listeners.

4.3.2   Listener interface versions

There are two supported listener interface versions with version numbers 2 and 3. A listener can specify which version to use by having a ROBOT_LISTENER_API_VERSION attribute with value 2 or 3, respectively. Starting from Robot Framework 7.0, the listener version 3 is used by default if the version is not specified.

Listener version 2 and listener version 3 have mostly the same methods, but arguments passed to these methods are different. Arguments given to listener 2 methods are strings and dictionaries containing information about execution. This information can be inspected and sent further, but it is not possible to modify it directly. Listener 3 methods get the same model objects that Robot Framework itself uses, and these model objects can be both inspected and modified.

Listener version 3 is more powerful than the older listener version 2 and generally recommended.

Listener version 2

Listeners using the listener API version 2 get notifications about various events during execution, but they do not have access to actually executed tests and thus cannot directly affect the execution or created results.

Listener methods in the API version 2 are listed in the following table and in the API docs of the optional ListenerV2 base class. All methods related to test execution progress have the same signature method(name, attributes), where attributes is a dictionary containing details of the event. Listener methods are free to do whatever they want to do with the information they receive, but they cannot directly change it. If that is needed, listener version 3 can be used instead.

Methods in the listener API 2
Method Arguments Documentation
start_suite name, attributes

Called when a test suite starts.

Contents of the attribute dictionary:

  • id: Suite id. s1 for the top level suite, s1-s1 for its first child suite, s1-s2 for the second child, and so on.
  • longname: Suite name including parent suites.
  • doc: Suite documentation.
  • metadata: Free suite metadata as a dictionary.
  • source: An absolute path of the file/directory the suite was created from.
  • suites: Names of the direct child suites this suite has as a list.
  • tests: Names of the tests this suite has as a list. Does not include tests of the possible child suites.
  • totaltests: The total number of tests in this suite. and all its sub-suites as an integer.
  • starttime: Suite execution start time.
end_suite name, attributes

Called when a test suite ends.

Contents of the attribute dictionary:

  • id: Same as in start_suite.
  • longname: Same as in start_suite.
  • doc: Same as in start_suite.
  • metadata: Same as in start_suite.
  • source: Same as in start_suite.
  • starttime: Same as in start_suite.
  • endtime: Suite execution end time.
  • elapsedtime: Total execution time in milliseconds as an integer
  • status: Suite status as string PASS, FAIL or SKIP.
  • statistics: Suite statistics (number of passed and failed tests in the suite) as a string.
  • message: Error message if suite setup or teardown has failed, empty otherwise.
start_test name, attributes

Called when a test case starts.

Contents of the attribute dictionary:

  • id: Test id in format like s1-s2-t2, where the beginning is the parent suite id and the last part shows test index in that suite.
  • longname: Test name including parent suites.
  • originalname: Test name with possible variables unresolved. New in RF 3.2.
  • doc: Test documentation.
  • tags: Test tags as a list of strings.
  • template: The name of the template used for the test. An empty string if the test not templated.
  • source: An absolute path of the test case source file. New in RF 4.0.
  • lineno: Line number where the test starts in the source file. New in RF 3.2.
  • starttime: Test execution execution start time.
end_test name, attributes

Called when a test case ends.

Contents of the attribute dictionary:

  • id: Same as in start_test.
  • longname: Same as in start_test.
  • originalname: Same as in start_test.
  • doc: Same as in start_test.
  • tags: Same as in start_test.
  • template: Same as in start_test.
  • source: Same as in start_test.
  • lineno: Same as in start_test.
  • starttime: Same as in start_test.
  • endtime: Test execution execution end time.
  • elapsedtime: Total execution time in milliseconds as an integer
  • status: Test status as string PASS, FAIL or SKIP.
  • message: Status message. Normally an error message or an empty string.
start_keyword name, attributes

Called when a keyword or a control structure such as IF/ELSE or TRY/EXCEPT starts.

With keywords name is the full keyword name containing possible library or resource name as a prefix like MyLibrary.Example Keyword. With control structures name contains string representation of parameters.

Keywords and control structures share most of attributes, but control structures can have additional attributes depending on their type.

Shared attributes:

  • type: String specifying type of the started item. Possible values are: KEYWORD, SETUP, TEARDOWN, FOR, WHILE, ITERATION, IF, ELSE IF, ELSE, TRY, EXCEPT, FINALLY, VAR, RETURN, BREAK, CONTINUE and ERROR. All type values were changed in RF 4.0 and in RF 5.0 FOR ITERATION was changed to ITERATION.
  • kwname: Name of the keyword without library or resource prefix. String representation of parameters with control structures.
  • libname: Name of the library or resource file the keyword belongs to. An empty string with user keywords in a test case file and with control structures.
  • doc: Keyword documentation.
  • args: Keyword's arguments as a list of strings.
  • assign: A list of variable names that keyword's return value is assigned to.
  • tags: Keyword tags as a list of strings.
  • source: An absolute path of the file where the keyword was used. New in RF 4.0.
  • lineno: Line where the keyword was used. New in RF 4.0.
  • status: Initial keyword status. NOT RUN if keyword is not executed (e.g. due to an earlier failure), NOT SET otherwise. New in RF 4.0.
  • starttime: Keyword execution start time.

Additional attributes for FOR types:

  • variables: Assigned variables for each loop iteration as a list or strings.
  • flavor: Type of loop (e.g. IN RANGE).
  • values: List of values being looped over as a list or strings.
  • start: Start configuration. Only used with IN ENUMERATE loops. New in RF 6.1.
  • mode: Mode configuration. Only used with IN ZIP loops. New in RF 6.1.
  • fill: Fill value configuration. Only used with IN ZIP loops. New in RF 6.1.

Additional attributes for ITERATION types with FOR loops:

  • variables: Variables and string representations of their contents for one FOR loop iteration as a dictionary.

Additional attributes for WHILE types:

  • condition: The looping condition.
  • limit: The maximum iteration limit.
  • on_limit: What to do if the limit is exceeded. Valid values are pass and fail. New in RF 7.0.
  • on_limit_message: The custom error raised when the limit of the WHILE loop is reached. New in RF 6.1.

Additional attributes for IF and ELSE IF types:

  • condition: The conditional expression being evaluated. With ELSE IF new in RF 6.1.

Additional attributes for EXCEPT types:

  • patterns: The exception patterns being matched as a list or strings.
  • pattern_type: The type of pattern match (e.g. GLOB).
  • variable: The variable containing the captured exception.

Additional attributes for RETURN types:

  • values: Return values from a keyword as a list or strings.

Additional attributes for VAR types:

  • name: Variable name.
  • value: Variable value. A string with scalar variables and a list otherwise.
  • scope: Variable scope (e.g. GLOBAL) as a string.

Additional attributes for control structures are in general new in RF 6.0. VAR is new in RF 7.0.

end_keyword name, attributes

Called when a keyword or a control structure ends.

name is the full keyword name containing possible library or resource name as a prefix. For example, MyLibrary.Example Keyword.

Control structures have additional attributes, which change based on the type attribute. For descriptions of all possible attributes, see the start_keyword section.

Contents of the attribute dictionary:

  • type: Same as with start_keyword.
  • kwname: Same as with start_keyword.
  • libname: Same as with start_keyword.
  • doc: Same as with start_keyword.
  • args: Same as with start_keyword.
  • assign: Same as with start_keyword.
  • tags: Same as with start_keyword.
  • source: Same as with start_keyword.
  • lineno: Same as with start_keyword.
  • starttime: Same as with start_keyword.
  • endtime: Keyword execution end time.
  • elapsedtime: Total execution time in milliseconds as an integer
  • status: Keyword status as string PASS, FAIL, SKIP or NOT RUN. SKIP and NOT RUN are new in RF 4.0.
log_message message

Called when an executed keyword writes a log message.

message is a dictionary with the following contents:

  • message: The content of the message.
  • level: Log level used in logging the message.
  • timestamp: Message creation time in format YYYY-MM-DD hh:mm:ss.mil.
  • html: String yes or no denoting whether the message should be interpreted as HTML or not.

Not called if the message level is below the current threshold level.

message message

Called when the framework itself writes a syslog message.

message is a dictionary with the same contents as with log_message method.

library_import name, attributes

Called when a library has been imported.

name is the name of the imported library. If the library has been given a custom name when imported it using AS, name is the specified alias.

Contents of the attribute dictionary:

  • args: Arguments passed to the library as a list.
  • originalname: The original library name if the library has been given an alias using AS, otherwise same as name.
  • source: An absolute path to the library source. An empty string if getting the source of the library failed for some reason.
  • importer: An absolute path to the file importing the library. None when BuiltIn is imported as well as when using the Import Library keyword.
resource_import name, attributes

Called when a resource file has been imported.

name is the name of the imported resource file without the file extension.

Contents of the attribute dictionary:

  • source: An absolute path to the imported resource file.
  • importer: An absolute path to the file importing the resource file. None when using the Import Resource keyword.
variables_import name, attributes

Called when a variable file has been imported.

name is the name of the imported variable file with the file extension.

Contents of the attribute dictionary:

  • args: Arguments passed to the variable file as a list.
  • source: An absolute path to the imported variable file.
  • importer: An absolute path to the file importing the resource file. None when using the Import Variables keyword.
output_file path

Called when writing to an output file is ready.

path is an absolute path to the file as a string or a string None if creating the output file is disabled.

log_file path

Called when writing to a log file is ready.

path is an absolute path to the file as a string. Not called if creating the log file is disabled.

report_file path

Called when writing to a report file is ready.

path is an absolute path to the file as a string. Not called if creating the report file is disabled.

xunit_file path

Called when writing to an xunit file is ready.

path is an absolute path to the file as a string. Only called if creating the xunit file is enabled.

debug_file path

Called when writing to a debug file is ready.

path is an absolute path to the file as a string. Only called if creating the debug file is enabled.

close  

Called when the whole test execution ends.

With library listeners called when the library goes out of scope.

Listener version 3

Listener version 3 has mostly the same methods as listener version 2, but arguments of the methods related to test execution are different. These methods get actual running and result model objects that used by Robot Framework itself, and listeners can both query information they need and change the model objects on the fly.

Listener version 3 was enhanced heavily in Robot Framework 7.0 when it got methods related to keywords and control structures. It was enhanced further in Robot Framework 7.1 when it got methods related to library, resource file and variable file imports.

Listener version 3 has separate methods for library keywords, user keywords and all control structures. If there is a need to listen to all keyword related events, it is possible to implement start_keyword and end_keyword. In addition to that, start_body_item and end_body_item can be implemented to get notifications related to all keywords and control structures. These higher level listener methods are not called if more specific methods like start_library_keyword or end_if are implemented.

Listener methods in the API version 3 are listed in the following table and in the API docs of the optional ListenerV3 base class.

Methods in the listener API 3
Method Arguments Documentation
start_suite data, result

Called when a test suite starts.

data and result are model objects representing the executed test suite and its execution results, respectively.

end_suite data, result

Called when a test suite ends.

Same arguments as with start_suite.

start_test data, result

Called when a test case starts.

data and result are model objects representing the executed test case and its execution results, respectively.

end_test data, result

Called when a test case ends.

Same arguments as with start_test.

start_keyword data, result

Called when a keyword starts.

data and result are model objects representing the executed keyword call and its execution results, respectively.

This method is called, by default, with user keywords, library keywords and when a keyword call is invalid. It is not called if a more specific start_user_keyword, start_library_keyword or start_invalid_keyword method is implemented.

end_keyword data, result

Called when a keyword ends.

Same arguments and other semantics as with start_keyword.

start_user_keyword data, implementation, result

Called when a user keyword starts.

data and result are the same as with start_keyword and implementation is the actually executed user keyword.

If this method is implemented, start_keyword is not called with user keywords.

end_user_keyword data, implementation, result

Called when a user keyword ends.

Same arguments and other semantics as with start_user_keyword.

start_library_keyword data implementation, result

Called when a library keyword starts.

data and result are the same as with start_keyword and implementation represents the executed library keyword.

If this method is implemented, start_keyword is not called with library keywords.

end_library_keyword data, implementation, result

Called when a library keyword ends.

Same arguments and other semantics as with start_library_keyword.

start_invalid_keyword data implementation, result

Called when an invalid keyword call starts.

data and result are the same as with start_keyword and implementation represents the invalid keyword call. Keyword may not have been found, there could have been multiple matches, or the keyword call itself could have been invalid.

If this method is implemented, start_keyword is not called with invalid keyword calls.

end_invalid_keyword data, implementation, result

Called when an invalid keyword call ends.

Same arguments and other semantics as with start_invalid_keyword.

start_for, start_for_iteration, start_while, start_while_iteration, start_if, start_if_branch, start_try, start_try_branch, start_var, start_continue, start_break, start_return data, result

Called when control structures start.

See the documentation and type hints of the optional ListenerV3 base class for more information.

end_for, end_for_iteration, end_while, end_while_iteration, end_if, end_if_branch, end_try, end_try_branch, end_var, end_continue, end_break, end_return data, result

Called when control structures end.

See the documentation and type hints of the optional ListenerV3 base class for more information.

start_error data, result Called when invalid syntax starts.
end_error data, result Called when invalid syntax ends.
start_body_item data, result Called when a keyword or a control structure starts, unless a more specific method such as start_keyword or start_if is implemented.
end_body_item data, result Called when a keyword or a control structure ends, unless a more specific method such as end_keyword or end_if is implemented.
log_message message

Called when an executed keyword writes a log message. message is a model object representing the logged message.

This method is not called if the message has level below the current threshold level.

message message

Called when the framework itself writes a syslog message.

message is same object as with log_message.

library_import library, importer

Called after a library has been imported.

library represents the imported library. It can be inspected and also modified. importer contains information about the location where the library was imported.

resource_import resource, importer

Called after a resource file has been imported.

resource represents the imported resource file. It can be inspected and also modified. importer contains information about the location where the resource was imported.

variables_import attrs, importer

Called after a variable file has been imported.

attrs contains information about the imported variable file as a dictionary. It can be inspected, but modifications to it have no effect. importer contains information about the location where the variable file was imported.

This method will be changed in the future so that the attrs dictionary is replaced with an object representing the imported variable file.

output_file path

Called when writing to an output file is ready.

path is an absolute path to the file as a pathlib.Path object or the None object if creating the output file is disabled.

log_file path

Called when writing to a log file is ready.

path is an absolute path to the file as a pathlib.Path object. Not called if creating the log file is disabled.

report_file path

Called when writing to a report file is ready.

path is an absolute path to the file as a pathlib.Path object. Not called if creating the report file is disabled.

xunit_file path

Called when writing to an xunit file is ready.

path is an absolute path to the file as a pathlib.Path object. Only called if creating the xunit file is enabled.

debug_file path

Called when writing to a debug file is ready.

path is an absolute path to the file as a pathlib.Path object. Only called if creating the debug file is enabled.

close  

Called when the whole test execution ends.

With library listeners called when the library goes out of scope.

Note

Methods related to keywords and control structures are new in Robot Framework 7.0.

Note

Methods related to library, resource file and variable file imports are new in Robot Framework 7.1.

Note

Prior to Robot Framework 7.0, paths passed to result file related listener version 3 methods were strings.

4.3.3   Taking listeners into use

Registering listeners from command line

Listeners that need to be active during the whole execution must be taken into use from the command line. That is done using the --listener option so that the name of the listener is given to it as an argument. The listener name is got from the name of the class or module implementing the listener, similarly as library name is got from the class or module implementing the library. The specified listeners must be in the same module search path where test libraries are searched from when they are imported. In addition to registering a listener by using a name, it is possible to give an absolute or a relative path to the listener file similarly as with test libraries. It is possible to take multiple listeners into use by using this option several times:

robot --listener MyListener tests.robot
robot --listener path/to/MyListener.py tests.robot
robot --listener module.Listener --listener AnotherListener tests.robot

It is also possible to give arguments to listener classes from the command line. Arguments are specified after the listener name (or path) using a colon (:) as a separator. If a listener is given as an absolute Windows path, the colon after the drive letter is not considered a separator. Additionally, it is possible to use a semicolon (;) as an alternative argument separator. This is useful if listener arguments themselves contain colons, but requires surrounding the whole value with quotes on UNIX-like operating systems:

robot --listener listener.py:arg1:arg2 tests.robot
robot --listener "listener.py;arg:with:colons" tests.robot
robot --listener c:\path\listener.py;d:\first\arg;e:\second\arg tests.robot

In addition to passing arguments one-by-one as positional arguments, it is possible to pass them using the named argument syntax similarly as when using keywords:

robot --listener listener.py:name=value tests.robot
robot --listener "listener.py;name=value:with:colons;second=argument" tests.robot

Listener arguments are automatically converted using same rules as with keywords based on type hints and default values. For example, this listener

class Listener:

    def __init__(self, port: int, log=True):
        self.port = post
        self.log = log

could be used like

robot --listener Listener:8270:false

and the first argument would be converted to an integer based on the type hint and the second to a Boolean based on the default value.

Note

Both the named argument syntax and argument conversion are new in Robot Framework 4.0.

Libraries as listeners

Sometimes it is useful also for test libraries to get notifications about test execution. This allows them, for example, to perform certain clean-up activities automatically when a test suite or the whole test execution ends.

Registering listener

A test library can register a listener by using the ROBOT_LIBRARY_LISTENER attribute. The value of this attribute should be an instance of the listener to use. It may be a totally independent listener or the library itself can act as a listener. To avoid listener methods to be exposed as keywords in the latter case, it is possible to prefix them with an underscore. For example, instead of using end_suite it is possible to use _end_suite.

Following examples illustrates using an external listener as well as a library acting as a listener itself:

from listener import Listener


class LibraryWithExternalListener:
    ROBOT_LIBRARY_SCOPE = 'GLOBAL'
    ROBOT_LIBRARY_LISTENER = Listener()

    def example_keyword(self):
         ...
class LibraryItselfAsListener:
    ROBOT_LIBRARY_SCOPE = 'SUITE'
    ROBOT_LISTENER_API_VERSION = 2

    def __init__(self):
        self.ROBOT_LIBRARY_LISTENER = self

    # Use the '_' prefix to avoid listener method becoming a keyword.
    def _end_suite(self, name, attrs):
        print(f"Suite '{name}' ending with status {attrs['id']}.")

    def example_keyword(self):
         ...

As the second example above already demonstrated, library listeners can specify listener interface versions using the ROBOT_LISTENER_API_VERSION attribute exactly like any other listener.

Starting from Robot Framework 7.0, a listener can register itself to be a listener also by using a string SELF (case-insensitive) as a listener. This is especially convenient when using the @library decorator:

from robot.api.deco import keyword, library


@library(scope='SUITE', listener='SELF')
class LibraryItselfAsListener:

    # Listener version is not specified, so uses the listener version 3 by default.
    # When using the @library decorator, keywords must use the @keyword decorator,
    # so there is no need to use the '_' prefix here.
    def end_suite(self, data, result):
        print(f"Suite '{data.name}' ending with status {result.status}.")

    @keyword
    def example_keyword(self):
         ...

It is also possible to specify multiple listeners for a single library by giving ROBOT_LIBRARY_LISTENER a value as a list:

from listeners import Listener1, Listener2, Listener3


class LibraryWithMultipleListeners:
    ROBOT_LIBRARY_LISTENER = [Listener1(), Listener2(), Listener3()]

    def example_keyword(self):
         ...
Called listener methods

Library listeners get notifications about all events in suites where libraries using them are imported. In practice this means that suite, test, keyword, control structure and log message related methods are called. In addition to them, the close method is called when the library goes out of the scope.

If library creates a new listener instance every time when the library itself is instantiated, the actual listener instance to use will change according to the library scope.

4.3.4   Listener calling order

By default, listeners are called in the order they are taken into use so that listeners registered from the command line are called before library listeners. It is, however, possible to control the calling order by setting the special ROBOT_LISTENER_PRIORITY attribute to an integer or a floating point value. The bigger the number, the higher precedence the listener has and the earlier it is called. The number can be positive or negative and it is zero by default.

The custom order does not affect the close method of library listeners, though. That method is always called when the library goes out of its scope.

Note

Controlling listener calling order is new in Robot Framework 7.1.

4.3.5   Listener examples

This section contains examples using the listener interface. First examples illustrate getting notifications durin execution and latter examples modify executed tests and created results.

Getting information

The first example is implemented as a Python module. It uses the listener version 2, but could equally well be implemented by using the listener version 3.

"""Listener that stops execution if a test fails."""

ROBOT_LISTENER_API_VERSION = 2

def end_test(name, attrs):
    if attrs['status'] == 'FAIL':
        print(f"Test '{name}'" failed: {attrs['message']}")
        input("Press enter to continue.")

If the above example would be saved to, for example, PauseExecution.py file, it could be used from the command line like this:

robot --listener path/to/PauseExecution.py tests.robot

The next example, which still uses the listener version 2, is slightly more complicated. It writes all the information it gets into a text file in a temporary directory without much formatting. The filename may be given from the command line, but it also has a default value. Note that in real usage, the debug file functionality available through the command line option --debugfile is probably more useful than this example.

import os.path
import tempfile


class Example:
    ROBOT_LISTENER_API_VERSION = 2

    def __init__(self, file_name='listen.txt'):
        path = os.path.join(tempfile.gettempdir(), file_name)
        self.file = open(path, 'w')

    def start_suite(self, name, attrs):
        self.file.write("%s '%s'\n" % (name, attrs['doc']))

    def start_test(self, name, attrs):
        tags = ' '.join(attrs['tags'])
        self.file.write("- %s '%s' [ %s ] :: " % (name, attrs['doc'], tags))

    def end_test(self, name, attrs):
        if attrs['status'] == 'PASS':
            self.file.write('PASS\n')
        else:
            self.file.write('FAIL: %s\n' % attrs['message'])

    def end_suite(self, name, attrs):
         self.file.write('%s\n%s\n' % (attrs['status'], attrs['message']))

    def close(self):
         self.file.close()

Modifying data and results

The following examples illustrate how to modify the executed tests and suites as well as the execution results. All these examples require using the listener version 3.

Modifying executed suites and tests

Changing what is executed is as easy as modifying the model objects representing executed data passed to listener methods. This is illustrated by the example below that adds a new test to each executed suite and a new keyword call to each test.

def start_suite(data, result):
    data.tests.create(name='New test')

def start_test(data, result):
    data.body.create_keyword(name='Log', args=['Keyword added by listener!'])

This API is very similar to the pre-run modifier API that can be used to modify suites and tests before the whole test execution starts. The main benefit of using the listener API is that modifications can be done dynamically based on execution results or otherwise. This allows, for example, interesting possibilities for model based testing.

Although the listener interface is not built on top of Robot Framework's internal visitor interface similarly as the pre-run modifier API, listeners can still use the visitors interface themselves. For example, the SelectEveryXthTest visitor used in pre-run modifier examples could be used like this:

from SelectEveryXthTest import SelectEveryXthTest


def start_suite(suite, result):
    selector = SelectEveryXthTest(x=2)
    suite.visit(selector)
Accessing library or resource file

It is possible to get more information about the actually executed keyword and the library or resource file it belongs to:

from robot.running import Keyword as KeywordData, LibraryKeyword
from robot.result import Keyword as KeywordResult


def start_library_keyword(data: KeywordData,
                          implementation: LibraryKeyword,
                          result: KeywordResult):
    library = implementation.owner
    print(f"Keyword '{implementation.name}' is implemented in library "
          f"'{library.name}' at '{implementation.source}' on line "
          f"{implementation.lineno}. The library has {library.scope.name} "
          f"scope and the current instance is {library.instance}.")

As the above example illustrates, it is possible to get an access to the actual library instance. This means that listeners can inspect the library state and also modify it. With user keywords it is even possible to modify the keyword itself or, via the owner resource file, any other keyword in the resource file.

Modifying results

Test execution results can be altered by modifying the result objects passed to listener methods. This is demonstrated by the following listener that is implemented as a class and also uses type hints:

from robot import result, running


class ResultModifier:

    def __init__(self, max_seconds: float = 10.0):
        self.max_seconds = max_seconds

    def start_suite(self, data: running.TestSuite, result: result.TestSuite):
        result.doc = 'Documentation set by listener.'
        # Information about tests only available via data at this point.
        smoke_tests = [test for test in data.tests if 'smoke' in test.tags]
        result.metadata['Smoke tests'] = len(smoke_tests)

    def end_test(self, data: running.TestCase, result: result.TestCase):
        elapsed_seconds = result.elapsed_time.total_seconds()
        if result.status == 'PASS' and elapsed_seconds > self.max_seconds:
            result.status = 'FAIL'
            result.message = 'Test execution took too long.'

    def log_message(self, msg: result.Message):
        if msg.level == 'WARN' and not msg.html:
            msg.message = f'<b style="font-size: 1.5em">{msg.message}</b>'
            msg.html = True

A limitation is that modifying the name of the current test suite or test case is not possible because it has already been written to the output.xml file when listeners are called. Due to the same reason modifying already finished tests in the end_suite method has no effect either.

This API is very similar to the pre-Rebot modifier API that can be used to modify results before report and log are generated. The main difference is that listeners modify also the created output.xml file.

Changing keyword and control structure status

Listeners can also affect the execution flow by changing statuses of the executed keywords and control structures. For example, if a listener changes the status of a passed keyword to FAIL, the keyword is considered failed exactly as if it had failed normally. Similarly, it is possible to change the status of a passed or failed keyword to SKIP to get the keyword and the whole test skipped. It is also possible to silence failures by changing the status to PASS, but this should be done only in special cases and with great care to avoid hiding real failures.

The following example demonstrates changing the status by failing keywords that take too long time to execute. The previous example had similar logic with tests, but this listener also stops the execution immediately if there is a keyword that is too slow. As the example shows, listeners can also change the error message, not only the status.

from robot import result, running


class KeywordPerformanceMonitor:

    def __init__(self, max_seconds: float = 0.1):
        self.max_seconds = max_seconds

    def end_keyword(self, data: running.Keyword, result: result.Keyword):
        elapsed_seconds = result.elapsed_time.total_seconds()
        if result.status == 'PASS' and elapsed_seconds > self.max_seconds:
            result.status = 'FAIL'
            result.message = 'Keyword execution took too long.'

Note

Changes to status only affect the execution flow starting from Robot Framework 7.1.

More examples

Keyword and control structure related listener version 3 methods are so versatile that covering them fully here in the User Guide is not possible. For more examples, you can see the acceptance tests using theses methods in various ways.

4.4   Parser interface

Robot Framework supports external parsers that can handle custom data formats or even override Robot Framework's own parser.

Note

Custom parsers are new in Robot Framework 6.1.

4.4.1   Taking parsers into use

Parsers are taken into use from the command line with the --parser option using exactly the same semantics as with listeners. This includes specifying parsers as names or paths, giving arguments to parser classes, and so on:

robot --parser MyParser tests.custom
robot --parser path/to/MyParser.py tests.custom
robot --parser Parser1:arg --parser Parser2:a1:a2 path/to/tests

4.4.2   Parser API

Parsers can be implemented both as modules and classes. This section explains what attributes and methods they must contain.

EXTENSION or extension attribute

This attribute specifies what file extension or extensions the parser supports. Both EXTENSION and extension names are accepted, and the former has precedence if both exist. The attribute can be either a string or a sequence of strings. Extensions are case-insensitive and can be specified with or without the leading dot. If a parser is implemented as a class, it is possible to set this attribute either as a class attribute or as an instance attribute.

Also extensions containing multiple parts like .example.ext or .robot.zip are supported.

Note

If a parser supports the .robot extension, it will be used for parsing these files instead of the standard parser.

parse method

The mandatory parse method is responsible for parsing suite files. It is called with each parsed file that has an extension that the parser supports. The method must return a TestSuite object.

In simple cases parse can be implemented so that it accepts just a single argument that is a pathlib.Path object pointing to the file to parse. If the parser is interested in defaults for Test Setup, Test Teardown, Test Tags and Test Timeout set in higher level suite initialization files, the parse method must accept two arguments. In that case the second argument is a TestDefaults object.

parse_init method

The optional parse_init method is responsible for parsing suite initialization files i.e. files in format __init__.ext where .ext is an extension supported by the parser. The method must return a TestSuite object representing the whole directory. Suites created from child suite files and directories will be added to its child suites.

Also parse_init can be implemented so that it accepts one or two arguments, depending on is it interested in test related default values or not. If it accepts defaults, it can manipulate the passed TestDefaults object and changes are seen when parsing child suite files.

This method is only needed if a parser needs to support suite initialization files.

Optional base class

Parsers do not need to implement any explicit interface, but it may be helpful to extend the optional Parser base class. The main benefit is that the base class has documentation and type hints. It also works as a bit more formal API specification.

4.4.3   Examples

Parser implemented as module

The first example demonstrates a simple parser implemented as a module and supporting one hard-coded extension. It just creates a dummy suite and does not actually parse anything.

from robot.api import TestSuite


EXTENSION = '.example'


def parse(source):
    suite = TestSuite(name='Example', source=source)
    test = suite.tests.create(name='Test')
    test.body.create_keyword(name='Log', args=['Hello!'])
    return suite

Parser implemented as class

The second parser is implemented as a class that accepts the extension to use as an argument. The parser reads the given source file and creates dummy tests from each line it contains.

from pathlib import Path
from robot.api import TestSuite


class ExampleParser:

    def __init__(self, extension: str):
        self.extension = extension

    def parse(self, source: Path) -> TestSuite:
        name = TestSuite.name_from_source(source, self.extension)
        suite = TestSuite(name, source=source)
        for line in source.read_text().splitlines():
            test = suite.tests.create(name=line)
            test.body.create_keyword(name='Log', args=['Hello!'])
        return suite

Parser extending optional base class

This parser extends the optional Parser base class. It supports parsing suite initialization files, uses TestDefaults and registers multiple extensions.

from pathlib import Path
from robot.api import TestSuite
from robot.api.interfaces import Parser, TestDefaults


class ExampleParser(Parser):
    extension = ('example', 'another')

    def parse(self, source: Path, defaults: TestDefaults) -> TestSuite:
        """Create a suite and set possible defaults from init files to tests."""
        suite = TestSuite(TestSuite.name_from_source(source), source=source)
        for line in source.read_text().splitlines():
            test = suite.tests.create(name=line, doc='Example')
            test.body.create_keyword(name='Log', args=['Hello!'])
            defaults.set_to(test)
        return suite

    def parse_init(self, source: Path, defaults: TestDefaults) -> TestSuite:
        """Create a dummy suite and set some defaults.

        This method is called only if there is an initialization file with
        a supported extension.
        """
        defaults.tags = ('tags', 'from init')
        defaults.setup = {'name': 'Log', 'args': ['Hello from init!']}
        return TestSuite(TestSuite.name_from_source(source.parent), doc='Example',
                         source=source, metadata={'Example': 'Value'})

Parser as preprocessor

The final example parser acts as a preprocessor for Robot Framework data files that supports headers in format === Test Cases === in addition to *** Test Cases ***. In this kind of usage it is convenient to use TestSuite.from_string, TestSuite.from_model and TestSuite.from_file_system factory methods for constructing the returned suite.

from pathlib import Path
from robot.running import TestDefaults, TestSuite


class RobotPreprocessor:
    extension = '.robot'

    def parse(self, source: Path, defaults: TestDefaults) -> TestSuite:
        data = source.read_text()
        for header in 'Settings', 'Variables', 'Test Cases', 'Keywords':
            data = data.replace(f'=== {header} ===', f'*** {header} ***')
        suite = TestSuite.from_string(data, defaults=defaults)
        return suite.config(name=TestSuite.name_from_source(source), source=source)

5   Supporting Tools

5.1   Library documentation tool (Libdoc)

Libdoc is Robot Framework's built-in tool that can generate documentation for Robot Framework libraries and resource files. It can generate HTML documentation for humans as well as machine readable spec files in XML and JSON formats. Libdoc also has few special commands to show library or resource information on the console.

Documentation can be created for:

Additionally it is possible to use XML and JSON spec files created by Libdoc earlier as an input.

Note

Support for generating documentation for suite files and suite initialization files is new in Robot Framework 6.0.

Note

The support for the JSON spec files is new in Robot Framework 4.0.

5.1.1   General usage

Synopsis

libdoc [options] library_or_resource output_file
libdoc [options] library_or_resource list|show|version [names]

Options

-f, --format <html|xml|json|libspec>
 Specifies whether to generate an HTML output for humans or a machine readable spec file in XML or JSON format. The libspec format means XML spec with documentations converted to HTML. The default format is got from the output file extension.
-s, --specdocformat <raw|html>
 Specifies the documentation format used with XML and JSON spec files. raw means preserving the original documentation format and html means converting documentation to HTML. The default is raw with XML spec files and html with JSON specs and when using the special libspec format. New in Robot Framework 4.0.
-F, --docformat <robot|html|text|rest>
 Specifies the source documentation format. Possible values are Robot Framework's documentation format, HTML, plain text, and reStructuredText. Default value can be specified in test library source code and the initial default value is robot.
--theme <dark|light|none>
 Use dark or light HTML theme. If this option is not used, or the value is none, the theme is selected based on the browser color scheme. Only applicable with HTML outputs. New in Robot Framework 6.0.
-N, --name <newname>
 Sets the name of the documented library or resource.
-V, --version <newversion>
 Sets the version of the documented library or resource. The default value for test libraries is defined in the source code.
-P, --pythonpath <path>
 Additional locations where to search for libraries and resources similarly as when running tests.
--quiet Do not print the path of the generated output file to the console. New in Robot Framework 4.0.
-h, --help Prints this help.

Executing Libdoc

The easiest way to run Libdoc is using the libdoc command created as part of the normal installation:

libdoc ExampleLibrary ExampleLibrary.html

Alternatively it is possible to execute the robot.libdoc module directly. This approach is especially useful if you have installed Robot Framework using multiple Python versions and want to use a specific version with Libdoc:

python -m robot.libdoc ExampleLibrary ExampleLibrary.html
python3.9 -m robot.libdoc ExampleLibrary ExampleLibrary.html

Yet another alternative is running the robot.libdoc module as a script:

python path/to/robot/libdoc.py ExampleLibrary ExampleLibrary.html

Note

The separate libdoc command is new in Robot Framework 4.0.

Specifying library or resource file

Python libraries and dynamic libraries with name or path

When documenting libraries implemented with Python or that use the dynamic library API, it is possible to specify the library either by using just the library name or path to the library source code:

libdoc ExampleLibrary ExampleLibrary.html
libdoc src/ExampleLibrary.py docs/ExampleLibrary.html

In the former case the library is searched using the module search path and its name must be in the same format as when importing libraries in Robot Framework test data.

If these libraries require arguments when they are imported, the arguments must be catenated with the library name or path using two colons like MyLibrary::arg1::arg2. If arguments change what keywords the library provides or otherwise alter its documentation, it might be a good idea to use --name option to also change the library name accordingly.

Resource files with path

Resource files must always be specified using a path:

libdoc example.resource example.html

If the path does not exist, resource files are also searched from all directories in the module search path similarly as when executing test cases.

Libdoc spec files

Earlier generated Libdoc XML or JSON spec files can also be used as inputs. This works if spec files use either *.xml, *.libspec or *.json extension:

libdoc Example.xml Example.html
libdoc Example.libspec Example.html
libdoc Example.json Example.html

Note

Support for the *.libspec extension is new in Robot Framework 3.2.

Note

Support for the *.json extension is new in Robot Framework 4.0.

Generating documentation

Libdoc can generate documentation in HTML (for humans) and XML or JSON (for tools) formats. The file where to write the documentation is specified as the second argument after the library/resource name or path, and the output format is got from the output file extension by default.

Libdoc HTML documentation

Most Robot Framework libraries use Libdoc to generate library documentation in HTML format. This format is thus familiar for most people who have used Robot Framework. A simple example can be seen below, and it has been generated based on the example found a bit later in this section.

src/SupportingTools/ExampleLibrary.png

The HTML documentation starts with general library introduction, continues with a section about configuring the library when it is imported (when applicable), and finally has shortcuts to all keywords and the keywords themselves. The magnifying glass icon on the lower right corner opens the keyword search dialog that can also be opened by simply pressing the s key.

Libdoc automatically creates HTML documentation if the output file extension is *.html. If there is a need to use some other extension, the format can be specified explicitly with the --format option.

libdoc OperatingSystem OperatingSystem.html
libdoc --name MyLibrary Remote::http://10.0.0.42:8270 MyLibrary.html
libdoc --format HTML test/resource.robot doc/resource.htm
Libdoc XML spec files

Libdoc can also generate documentation in XML format that is suitable for external tools such as editors. It contains all the same information as the HTML format but in a machine readable format.

XML spec files also contain library and keyword source information so that the library and each keyword can have source path (source attribute) and line number (lineno attribute). The source path is relative to the directory where the spec file is generated thus does not refer to a correct file if the spec is moved. The source path is omitted with keywords if it is the same as with the library, and both the source path and the line number are omitted if getting them from the library fails for whatever reason.

Libdoc automatically uses the XML format if the output file extension is *.xml or *.libspec. When using the special *.libspec extension, Libdoc automatically enables the options -f XML -s HTML which means creating an XML output file where keyword documentation is converted to HTML. If needed, the format can be explicitly set with the --format option.

libdoc OperatingSystem OperatingSystem.xml
libdoc test/resource.robot doc/resource.libspec
libdoc --format xml MyLibrary MyLibrary.spec
libdoc --format xml -s html MyLibrary MyLibrary.xml

The exact Libdoc spec file format is documented with an XML schema (XSD) at https://github.com/robotframework/robotframework/tree/master/doc/schema. The spec file format may change between Robot Framework major releases.

To make it easier for external tools to know how to parse a certain spec file, the spec file root element has a dedicated specversion attribute. It was added in Robot Framework 3.2 with value 2 and earlier spec files can be considered to have version 1. The spec version will be incremented in the future if and when changes are made. Robot Framework 4.0 introduced new spec version 3 which is incompatible with earlier versions.

Note

The XML:HTML format introduced in Robot Framework 3.2. has been replaced by the format LIBSPEC ot the option combination --format XML --specdocformat HTML.

Note

Including source information and spec version are new in Robot Framework 3.2.

Libdoc JSON spec files

Since Robot Framework 4.0 Libdoc can also generate documentation in JSON format that is suitable for external tools such as editors or web pages. It contains all the same information as the HTML format but in a machine readable format.

Similar to XML spec files the JSON spec files contain all information and can also be used as input to Libdoc. From that format any other output format can be created. By default the library documentation strings are converted to HTML format within the JSON output file.

The exact JSON spec file format is documented with an JSON schema at https://github.com/robotframework/robotframework/tree/master/doc/schema. The spec file format may change between Robot Framework major releases.

Viewing information on console

Libdoc has three special commands to show information on the console. These commands are used instead of the name of the output file, and they can also take additional arguments.

list
List names of the keywords the library/resource contains. Can be limited to show only certain keywords by passing optional patterns as arguments. Keyword is listed if its name contains given pattern.
show
Show library/resource documentation. Can be limited to show only certain keywords by passing names as arguments. Keyword is shown if its name matches any given name. Special argument intro will show only the library introduction and importing sections.
version
Show library version

Optional patterns given to list and show are case and space insensitive. Both also accept * and ? as wildcards.

Examples:

libdoc Dialogs list
libdoc SeleniumLibrary list browser
libdoc Remote::10.0.0.42:8270 show
libdoc Dialogs show PauseExecution execute*
libdoc SeleniumLibrary show intro
libdoc SeleniumLibrary version

5.1.2   Writing documentation

This section discusses writing documentation for Python based test libraries that use the static library API as well as for dynamic libraries and resource files. Creating test libraries and resource files is described in more details elsewhere in the User Guide.

Python libraries

The documentation for Python libraries that use the static library API is written simply as doc strings for the library class or module and for methods implementing keywords. The first line of the method documentation is considered as a short documentation for the keyword (used, for example, as a tool tip in links in the generated HTML documentation), and it should thus be as describing as possible, but not too long.

The simple example below illustrates how to write the documentation in general. How the HTML documentation generated based on this example looks like can be seen above, and there is also a bit longer example at the end of this chapter.

class ExampleLibrary:
    """Library for demo purposes.

    This library is only used in an example and it doesn't do anything useful.
    """

    def my_keyword(self):
        """Does nothing."""
        pass

    def your_keyword(self, arg):
        """Takes one argument and *does nothing* with it.

        Examples:
        | Your Keyword | xxx |
        | Your Keyword | yyy |
        """
        pass

Tip

If you library does some initialization work that should not be done when using Libdoc, you can easily detect is Robot Framework running

Tip

For more information on Python documentation strings, see PEP-257.

Dynamic libraries

To be able to generate meaningful documentation for dynamic libraries, the libraries must return keyword argument names and documentation using get_keyword_arguments and get_keyword_documentation methods (or using their camelCase variants getKeywordArguments and getKeywordDocumentation). Libraries can also support general library documentation via special __intro__ and __init__ values to the get_keyword_documentation method.

See the Dynamic library API section for more information about how to create these methods.

Importing section

A separate section about how the library is imported is created based on its initialization methods. If the library has an __init__ method that takes arguments in addition to self, its documentation and arguments are shown.

class TestLibrary:

    def __init__(self, mode='default')
        """Creates new TestLibrary. `mode` argument is used to determine mode."""
        self.mode = mode

    def some_keyword(self, arg):
        """Does something based on given `arg`.

        What is done depends on the `mode` specified when `importing` the library.
        """
        if self.mode == 'secret':
             # ...

Resource file documentation

Keywords in resource files can have documentation using [Documentation] setting, and this documentation is also used by Libdoc. First line of the documentation (until the first implicit newline or explicit \n) is considered to be the short documentation similarly as with test libraries.

Also the resource file itself can have Documentation in the Setting section for documenting the whole resource file.

Possible variables in resource files can not be documented.

*** Settings ***
Documentation    Resource file for demo purposes.
...              This resource is only used in an example and it doesn't do anything useful.

*** Keywords ***
My Keyword
    [Documentation]   Does nothing
    No Operation

Your Keyword
    [Arguments]  ${arg}
    [Documentation]   Takes one argument and *does nothing* with it.
    ...
    ...    Examples:
    ...    | Your Keyword | xxx |
    ...    | Your Keyword | yyy |
    No Operation

5.1.3   Documentation syntax

Libdoc supports documentation in Robot Framework's own documentation syntax, HTML, plain text, and reStructuredText. The format to use can be specified in library source code using ROBOT_LIBRARY_DOC_FORMAT attribute or given from the command line using --docformat (-F) option. In both cases the possible case-insensitive values are ROBOT (default), HTML, TEXT and reST.

Robot Framework's own documentation format is the default and generally recommended format. Other formats are especially useful when using existing code with existing documentation in test libraries.

Robot Framework documentation syntax

Most important features in Robot Framework's documentation syntax are formatting using *bold* and _italic_, custom links and automatic conversion of URLs to links, and the possibility to create tables and pre-formatted text blocks (useful for examples) simply with pipe character. If documentation gets longer, support for section titles can also be handy.

Some of the most important formatting features are illustrated in the example below. Notice that since this is the default format, there is no need to use ROBOT_LIBRARY_DOC_FORMAT attribute nor give the format from the command line.

"""Example library in Robot Framework format.

- Formatting with *bold* and _italic_.
- URLs like http://example.com are turned to links.
- Custom links like [http://robotframework.org|Robot Framework] are supported.
- Linking to `My Keyword` works.
"""

def my_keyword():
    """Nothing more to see here."""
Creating table of contents automatically

With bigger libraries it is often useful to add a table of contents to the library introduction. When using the Robot Framework documentation format, this can be done automatically by adding a special %TOC% marker into a line on its own. The table of contents is created based on the top-level section titles (e.g. = Section =) used in the introduction. In addition to them, the TOC also gets links to the automatically created sections for shortcuts and keywords as well as for importing and tags sections when applicable.

"""Example library demonstrating TOC generation.

The %TOC% marker only creates the actual table of contents and possible
header or other explanation needs to be added separately like done below.

== Table of contents ==

%TOC%

= Section title =

The top-level section titles are automatically added to the TOC.

= Second section =

== Sub section ==

Sub section titles are not added to the TOC.
"""

def my_keyword():
    """Nothing more to see here."""

Note

Automatic TOC generation is a new feature in Robot Framework 3.2.

HTML documentation syntax

When using HTML format, you can create documentation pretty much freely using any syntax. The main drawback is that HTML markup is not that human friendly, and that can make the documentation in the source code hard to maintain and read. Documentation in HTML format is used by Libdoc directly without any transformation or escaping. The special syntax for linking to keywords using syntax like `My Keyword` is supported, however.

Example below contains the same formatting examples as the previous example. Now ROBOT_LIBRARY_DOC_FORMAT attribute must be used or format given on the command line like --docformat HTML.

"""Example library in HTML format.

<ul>
  <li>Formatting with <b>bold</b> and <i>italic</i>.
  <li>URLs are not turned to links automatically.
  <li>Custom links like <a href="http://www.w3.org/html">HTML</a> are supported.
  <li>Linking to `My Keyword` works.
</ul>
"""
ROBOT_LIBRARY_DOC_FORMAT = 'HTML'

def my_keyword():
    """Nothing more to see here."""

Plain text documentation syntax

When the plain text format is used, Libdoc uses the documentation as-is. Newlines and other whitespace are preserved except for indentation, and HTML special characters (<>&) escaped. The only formatting done is turning URLs into clickable links and supporting internal linking like `My Keyword`.

"""Example library in plain text format.

- Formatting is not supported.
- URLs like http://example.com are turned to links.
- Custom links are not supported.
- Linking to `My Keyword` works.
"""
ROBOT_LIBRARY_DOC_FORMAT = 'text'

def my_keyword():
    """Nothing more to see here."""

reStructuredText documentation syntax

reStructuredText is simple yet powerful markup syntax used widely in Python projects (including this User Guide) and elsewhere. The main limitation is that you need to have the docutils module installed to be able to generate documentation using it. Because backtick characters have special meaning in reStructuredText, linking to keywords requires them to be escaped like \`My Keyword\`.

One of the nice features that reStructured supports is the ability to mark code blocks that can be syntax highlighted. Syntax highlight requires additional Pygments module and supports all the languages that Pygments supports.

"""Example library in reStructuredText format.

- Formatting with **bold** and *italic*.
- URLs like http://example.com are turned to links.
- Custom links like reStructuredText__ are supported.
- Linking to \`My Keyword\` works but requires backtics to be escaped.

__ http://docutils.sourceforge.net

.. code:: robotframework

    *** Test Cases ***
    Example
        My keyword    # How cool is this!!?!!?!1!!
"""
ROBOT_LIBRARY_DOC_FORMAT = 'reST'

def my_keyword():
    """Nothing more to see here."""

5.1.4   Internal linking

Libdoc supports internal linking to keywords and different sections in the documentation. Linking is done by surrounding the target name with backtick characters like `target`. Target names are case-insensitive and possible targets are explained in the subsequent sections.

There is no error or warning if a link target is not found, but instead Libdoc just formats the text in italics. Earlier this formatting was recommended to be used when referring to keyword arguments, but that was problematic because it could accidentally create internal links. Nowadays it is recommended to use inline code style with double backticks like ``argument`` instead. The old formatting of single backticks may even be removed in the future in favor of giving an error when a link target is not found.

In addition to the examples in the following sections, internal linking and argument formatting is shown also in the longer example at the end of this chapter.

Linking to keywords

All keywords the library have automatically create link targets and they can be linked using syntax `Keyword Name`. This is illustrated with the example below where both keywords have links to each others.

def keyword(log_level="INFO"):
    """Does something and logs the output using the given level.

    Valid values for log level` are "INFO" (default) "DEBUG" and "TRACE".

    See also `Another Keyword`.
    """
    # ...

def another_keyword(argument, log_level="INFO"):
    """Does something with the given argument else and logs the output.

    See `Keyword` for information about valid log levels.
    """
    # ...

Note

When using reStructuredText documentation syntax, backticks must be escaped like \`Keyword Name\`.

Linking to automatic sections

The documentation generated by Libdoc always contains sections for overall library introduction and for keywords. If a library itself takes arguments, there is also separate importing section. If any of the keywords has tags, a separate selector for them is also shown in the overview.

All the sections act as targets that can be linked, and the possible target names are listed in the table below. Using these targets is shown in the example of the next section.

Automatic section link targets
Section Target
Introduction `introduction` and `library introduction`
Importing `importing` and `library importing`
Keywords `keywords`

Note

Before Robot Framework 4.0 there were also sections for tags and shortcuts. In Robot Framework 4.0 these have been removed in favor of the overview menu. This means that prior linking to shortcuts or tags sections does not work.

Linking to custom sections

Robot Framework's documentation syntax supports custom section titles, and the titles used in the library or resource file introduction automatically create link targets. The example below illustrates linking both to automatic and custom sections:

"""Library for Libdoc demonstration purposes.

This library does not do anything useful.

= My section  =

We do have a custom section in the documentation, though.
"""

def keyword():
    """Does nothing.

    See `introduction` for more information and `My section` to test how
    linking to custom sections works.
    """
    pass

Note

Linking to custom sections works only when using Robot Framework documentation syntax.

5.1.5   Representing arguments

Libdoc shows information about keywords' arguments automatically.

Included information

The following information is shown for all keywords regardless are they implemented in libraries or in resource files:

  • Argument name. User keyword arguments are shown without the ${} decoration to make arguments look the same regardless where keywords originate from.
  • Marker telling is the argument positional-only, named-only, free positional, free named, or normal argument that can be given either by position or by name.
  • Possible default value. Shown like = 42.
  • Possible type. Shown like <int>. Can be a link to type documentation as explained in the next section.

When referring to arguments in keyword documentation, it is recommended to use inline code style like ``argument``.

Automatically listing type documentation

As mentioned above, Libdoc automatically shows possible type information when listing arguments. If the type is a custom type based on Enum or TypedDict, the type is automatically converted, or the type has custom converter, also the type itself is listed separately to show more information about it. When these types are used in arguments, the type name also becomes a link to the type information.

All listed data types show possible type documentation as well as what argument types are supported. In addition to that, types based on Enum list available members and types based on TypedDict show the dictionary structure.

Note

Automatically listing types based on Enum and TypedDict is new in Robot Framework 4.0. Listing other types is new in Robot Framework 5.0.

5.1.6   Libdoc example

The following example illustrates how to use the most important documentation formatting possibilities, internal linking, and so on. Click here to see how the generated documentation looks like.

class LoggingLibrary:
    """Library for logging messages.

    = Table of contents =

    %TOC%

    = Usage =

    This library has several keyword, for example `Log Message`, for logging
    messages. In reality the library is used only for _Libdoc_ demonstration
    purposes.

    = Valid log levels =

    Valid log levels are ``INFO``, ``DEBUG``, and ``TRACE``. The default log
    level can be set during `importing`.

    = Examples =

    Notice how keywords are linked from examples.

    | `Log Message`      | My message    |                |               |
    | `Log Two Messages` | My message    | Second message | level=DEBUG   |
    | `Log Messages`     | First message | Second message | Third message |
    """
    ROBOT_LIBRARY_VERSION = '0.1'

    def __init__(self, default_level='INFO'):
        """The default log level can be given at library import time.

        See `Valid log levels` section for information about available log
        levels.

        Examples:

        | =Setting= |     =Value=    | =Value= |          =Comment=         |
        | Library   | LoggingLibrary |         | # Use default level (INFO) |
        | Library   | LoggingLibrary | DEBUG   | # Use the given level      |
        """
        self.default_level = self._verify_level(default_level)

    def _verify_level(self, level):
        level = level.upper()
        if level not in ['INFO', 'DEBUG', 'TRACE']:
            raise RuntimeError("Invalid log level'%s'. Valid levels are "
                               "'INFO', 'DEBUG', and 'TRACE'")
        return level

    def log_message(self, message, level=None):
        """Writes given message to the log file using the specified log level.

        The message to log and the log level to use are defined using
        ``message`` and ``level`` arguments, respectively.

        If no log level is given, the default level given during `library
        importing` is used.
        """
        level = self._verify_level(level) if level else self.default_level
        print("*%s* %s" % (level, message))

    def log_two_messages(self, message1, message2, level=None):
        """Writes given messages to the log file using the specified log level.

        See `Log Message` keyword for more information.
        """
        self.log_message(message1, level)
        self.log_message(message2, level)

    def log_messages(self, *messages):
        """Logs given messages using the log level set during `importing`.

        See also `Log Message` and `Log Two Messages`.
        """
        for msg in messages:
            self.log_message(msg)

All standard libraries have documentation generated by Libdoc and their documentation (and source code) act as a more realistic examples.

5.2   Test data documentation tool (Testdoc)

Testdoc is Robot Framework's built-in tool for generating high level documentation based on test cases. The created documentation is in HTML format and it includes name, documentation and other metadata of each test suite and test case, as well as the top-level keywords and their arguments.

5.2.1   General usage

Synopsis

python -m robot.testdoc [options] data_sources output_file

Options

-T, --title <title>
 Set the title of the generated documentation. Underscores in the title are converted to spaces. The default title is the name of the top level suite.
-N, --name <name>
 Override the name of the top level test suite.
-D, --doc <doc>
 Override the documentation of the top level test suite.
-M, --metadata <name:value>
 Set/override free metadata of the top level test suite.
-G, --settag <tag>
 Set given tag(s) to all test cases.
-t, --test <name>
 Include tests by name.
-s, --suite <name>
 Include suites by name.
-i, --include <tag>
 Include tests by tags.
-e, --exclude <tag>
 Exclude tests by tags.
-A, --argumentfile <path>
 Text file to read more arguments from. Works exactly like argument files when running tests.
-h, --help Print this help in the console.

All options except --title have exactly the same semantics as same options have when executing test cases.

5.2.2   Generating documentation

Data can be given as a single file, directory, or as multiple files and directories. In all these cases, the last argument must be the file where to write the output.

Testdoc can be executed as an installed module like python -m robot.testdoc or as a script like python path/robot/testdoc.py.

Examples:

python -m robot.testdoc my_test.robot testdoc.html
python path/to/robot/testdoc.py --name "Smoke tests" --include smoke path/to/tests smoke.html

5.3   Test data clean-up tool (Tidy)

The built-in Tidy tool was deprecated in Robot Framework 4.1 in favor of the new and enhanced external Robotidy tool. It was removed altogether in Robot Framework 5.0.

5.4   External tools

There are plenty of external tools that can be used with Robot Framework. These tools include plugins for various IDEs and text editors, tools for parallel execution and data-driven testing, plugins for continuous integration systems, and so on.

These tools are developed as separate projects independently from Robot Framework itself. For a list of the available tools see http://robotframework.org/.

6   Appendices

6.1   Available settings

This appendix lists all settings that can be used in different sections.

Note

Settings can be localized. See the Translations appendix for supported translations.

6.1.1   Setting section

The Setting section is used to import libraries, resource files and variable files and to define metadata for test suites and test cases. It can be included in test case files and resource files. Note that in a resource file, a Setting section can only include settings for importing libraries, resources, and variables.

Settings available in the Setting section
Name Description
Library Used for importing libraries.
Resource Used for taking resource files into use.
Variables Used for taking variable files into use.
Name Used for setting a custom suite name.
Documentation Used for specifying a suite or resource file documentation.
Metadata Used for setting free suite metadata.
Suite Setup Used for specifying the suite setup.
Suite Teardown Used for specifying the suite teardown.
Test Tags Used for specifying test case tags for all tests in a suite.
Force Tags, Default Tags Deprecated settings for specifying test case tags.
Keyword Tags Used for specifying user keyword tags for all keywords in a certain file.
Test Setup Used for specifying a default test setup.
Test Teardown Used for specifying a default test teardown.
Test Template Used for specifying a default template keyword for test cases.
Test Timeout Used for specifying a default test case timeout.
Task Setup, Task Teardown, Task Template, Task Timeout Aliases for Test Setup, Test Teardown, Test Template and Test Timeout, respectively, that can be used when creating tasks.

6.1.2   Test Case section

The settings in the Test Case section are always specific to the test case for which they are defined. Some of these settings override the default values defined in the Settings section.

Exactly same settings are available when creating tasks in the Task section.

Settings available in the Test Case section
Name Description
[Documentation] Used for specifying a test case documentation.
[Tags] Used for tagging test cases.
[Setup] Used for specifying a test setup.
[Teardown] Used for specifying a test teardown.
[Template] Used for specifying a template keyword.
[Timeout] Used for specifying a test case timeout.

6.1.3   Keyword section

Settings in the Keyword section are specific to the user keyword for which they are defined.

Settings available in the Keyword section
Name Description
[Documentation] Used for specifying a user keyword documentation.
[Tags] Used for specifying user keyword tags.
[Arguments] Used for specifying user keyword arguments.
[Setup] Used for specifying a user keyword setup. New in Robot Framework 7.0.
[Teardown] Used for specifying user keyword teardown.
[Timeout] Used for specifying a user keyword timeout.
[Return] Used for specifying user keyword return values. Deprecated in Robot Framework 7.0. Use the RETURN statement instead.

6.2   Command line options

This appendix lists all the command line options that are available when executing test cases and when post-processing outputs. Also environment variables affecting execution and post-processing are listed.

6.2.1   Command line options for test execution

--rpa Turn on generic automation mode.
--language <lang>
 Activate localization. lang can be a name or a code of a built-in language, or a path or a module name of a custom language file.
-F, --extension <value>
 Parse only these files when executing a directory.
-I, --parseinclude <pattern>
 Parse only matching files when executing a directory.
-N, --name <name>
 Sets the name of the top-level test suite.
-D, --doc <document>
 Sets the documentation of the top-level test suite.
-M, --metadata <name:value>
 Sets free metadata for the top level test suite.
-G, --settag <tag>
 Sets the tag(s) to all executed test cases.
-t, --test <name>
 Selects the test cases by name.
--task <name> Alias for --test that can be used when executing tasks.
-s, --suite <name>
 Selects the test suites by name.
-R, --rerunfailed <file>
 Selects failed tests from an earlier output file to be re-executed.
-S, --rerunfailedsuites <file>
 Selects failed test suites from an earlier output file to be re-executed.
-i, --include <tag>
 Selects the test cases by tag.
-e, --exclude <tag>
 Selects the test cases by tag.
--skip <tag> Tests having given tag will be skipped. Tag can be a pattern.
--skiponfailure <tag>
 Tests having given tag will be skipped if they fail.
-v, --variable <name:value>
 Sets individual variables.
-V, --variablefile <path:args>
 Sets variables using variable files.
-d, --outputdir <dir>
 Defines where to create output files.
-o, --output <file>
 Sets the path to the generated output file.
--legacyoutput Creates output file in Robot Framework 6.x compatible format.
-l, --log <file>
 Sets the path to the generated log file.
-r, --report <file>
 Sets the path to the generated report file.
-x, --xunit <file>
 Sets the path to the generated xUnit compatible result file.
-b, --debugfile <file>
 A debug file that is written during execution.
-T, --timestampoutputs
 Adds a timestamp to output files listed above.
--splitlog Split log file into smaller pieces that open in browser transparently.
--logtitle <title>
 Sets a title for the generated test log.
--reporttitle <title>
 Sets a title for the generated test report.
--reportbackground <colors>
 Sets background colors of the generated report.
--maxerrorlines <lines>
 Sets the number of error lines shown in report when tests fail.
--maxassignlength <characters>
 Sets the number of characters shown in log when variables are assigned.
-L, --loglevel <level>
 Sets the threshold level for logging. Optionally the default visible log level can be given separated with a colon (:).
--suitestatlevel <level>
 Defines how many levels to show in the Statistics by Suite table in outputs.
--tagstatinclude <tag>
 Includes only these tags in the Statistics by Tag table.
--tagstatexclude <tag>
 Excludes these tags from the Statistics by Tag table.
--tagstatcombine <tags:title>
 Creates combined statistics based on tags.
--tagdoc <pattern:doc>
 Adds documentation to the specified tags.
--tagstatlink <pattern:link:title>
 Adds external links to the Statistics by Tag table.
--expandkeywords <name:pattern|tag:pattern>
 Automatically expand keywords in the generated log file.
--removekeywords <all|passed|name:pattern|tag:pattern|for|while|wuks>
 Removes keyword data from the generated log file.
--flattenkeywords <for|while|iteration|name:pattern|tag:pattern>
 Flattens keywords in the generated log file.
--listener <name:args>
 Sets a listener for monitoring test execution.
--nostatusrc Sets the return code to zero regardless of failures in test cases. Error codes are returned normally.
--runemptysuite
 Executes tests also if the selected test suites are empty.
--dryrun In the dry run mode tests are run without executing keywords originating from test libraries. Useful for validating test data syntax.
-X, --exitonfailure
 Stops test execution if any test fails.
--exitonerror Stops test execution if any error occurs when parsing test data, importing libraries, and so on.
--skipteardownonexit
 Skips teardowns if test execution is prematurely stopped.
--prerunmodifier <name:args>
 Activate programmatic modification of test data.
--prerebotmodifier <name:args>
 Activate programmatic modification of results.
--randomize <all|suites|tests|none>
 Randomizes test execution order.
--console <verbose|dotted|quiet|none>
 Console output type.
--dotted Shortcut for --console dotted.
--quiet Shortcut for --console quiet.
-W, --consolewidth <width>
 Sets the width of the console output.
-C, --consolecolors <auto|on|ansi|off>
 Specifies are colors used on the console.
--consolelinks <auto|off>
 Controls making paths to results files hyperlinks.
-K, --consolemarkers <auto|on|off>
 Show markers on the console when top level keywords in a test case end.
-P, --pythonpath <path>
 Additional locations to add to the module search path.
-A, --argumentfile <path>
 A text file to read more arguments from.
-h, --help Prints usage instructions.
--version Prints the version information.

6.2.2   Command line options for post-processing outputs

--rpa Turn on generic automation mode.
-R, --merge Changes result combining behavior to merging.
-N, --name <name>
 Sets the name of the top level test suite.
-D, --doc <document>
 Sets the documentation of the top-level test suite.
-M, --metadata <name:value>
 Sets free metadata for the top-level test suite.
-G, --settag <tag>
 Sets the tag(s) to all processed test cases.
-t, --test <name>
 Selects the test cases by name.
--task <name> Alias for --test.
-s, --suite <name>
 Selects the test suites by name.
-i, --include <tag>
 Selects the test cases by tag.
-e, --exclude <tag>
 Selects the test cases by tag.
-d, --outputdir <dir>
 Defines where to create output files.
-o, --output <file>
 Sets the path to the generated output file.
--legacyoutput Creates output file in Robot Framework 6.x compatible format.
-l, --log <file>
 Sets the path to the generated log file.
-r, --report <file>
 Sets the path to the generated report file.
-x, --xunit <file>
 Sets the path to the generated xUnit compatible result file.
-T, --timestampoutputs
 Adds a timestamp to output files listed above.
--splitlog Split log file into smaller pieces that open in browser transparently.
--logtitle <title>
 Sets a title for the generated test log.
--reporttitle <title>
 Sets a title for the generated test report.
--reportbackground <colors>
 Sets background colors of the generated report.
-L, --loglevel <level>
 Sets the threshold level to select log messages. Optionally the default visible log level can be given separated with a colon (:).
--suitestatlevel <level>
 Defines how many levels to show in the Statistics by Suite table in outputs.
--tagstatinclude <tag>
 Includes only these tags in the Statistics by Tag table.
--tagstatexclude <tag>
 Excludes these tags from the Statistics by Tag table.
--tagstatcombine <tags:title>
 Creates combined statistics based on tags.
--tagdoc <pattern:doc>
 Adds documentation to the specified tags.
--tagstatlink <pattern:link:title>
 Adds external links to the Statistics by Tag table.
--expandkeywords <name:pattern|tag:pattern>
 Automatically expand keywords in the generated log file.
--removekeywords <all|passed|name:pattern|tag:pattern|for|wuks>
 Removes keyword data from the generated outputs.
--flattenkeywords <for|foritem|name:pattern|tag:pattern>
 Flattens keywords in the generated outputs.
--starttime <timestamp>
 Sets the starting time of test execution when creating reports.
--endtime <timestamp>
 Sets the ending time of test execution when creating reports.
--nostatusrc Sets the return code to zero regardless of failures in test cases. Error codes are returned normally.
--processemptysuite
 Processes output files even if files contain empty test suites.
--prerebotmodifier <name:args>
 Activate programmatic modification of results.
-C, --consolecolors <auto|on|ansi|off>
 Specifies are colors used on the console.
--consolelinks <auto|off>
 Controls making paths to results files hyperlinks.
-P, --pythonpath <path>
 Additional locations to add to the module search path.
-A, --argumentfile <path>
 A text file to read more arguments from.
-h, --help Prints usage instructions.
--version Prints the version information.

6.2.3   Environment variables for execution and post-processing

ROBOT_OPTIONS and REBOT_OPTIONS
Space separated list of default options to be placed in front of any explicit options on the command line.
ROBOT_SYSLOG_FILE
Path to a syslog file where Robot Framework writes internal information about parsing test case files and running tests.
ROBOT_SYSLOG_LEVEL
Log level to use when writing to the syslog file.
ROBOT_INTERNAL_TRACES
When set to any non-empty value, Robot Framework's internal methods are included in error tracebacks.

6.3   Translations

Robot Framework supports translating section headers, settings, Given/When/Then prefixes used in Behavior Driven Development (BDD) as well as true and false strings used in automatic Boolean argument conversion. This appendix lists all translations for all languages, excluding English, that Robot Framework supports out-of-the-box.

How to actually activate translations is explained in the Localization section. That section also explains how to create custom language definitions and how to contribute new translations.

6.3.1   Bulgarian (bg)

Section headers

Header Translation
Settings Настройки
Variables Променливи
Test Cases Тестови случаи
Tasks Задачи
Keywords Ключови думи
Comments Коментари

Settings

Setting Translation
Library Библиотека
Resource Ресурс
Variables Променлива
Name  
Documentation Документация
Metadata Метаданни
Suite Setup Първоначални настройки на комплекта
Suite Teardown Приключване на комплекта
Test Setup Първоначални настройки на тестове
Task Setup Първоначални настройки на задачи
Test Teardown Приключване на тестове
Task Teardown Приключване на задачи
Test Template Шаблон за тестове
Task Template Шаблон за задачи
Test Timeout Таймаут за тестове
Task Timeout Таймаут за задачи
Test Tags Етикети за тестове
Task Tags Етикети за задачи
Keyword Tags Етикети за ключови думи
Tags Етикети
Setup Първоначални настройки
Teardown Приключване
Template Шаблон
Timeout Таймаут
Arguments Аргументи

BDD prefixes

Prefix Translation
Given В случай че
When Когато
Then Тогава
And И
But Но

Boolean strings

True/False Values
True Вярно, Да, Включен
False Невярно, Не, Изключен, Нищо

6.3.2   Bosnian (bs)

Section headers

Header Translation
Settings Postavke
Variables Varijable
Test Cases Test Cases
Tasks Taskovi
Keywords Keywords
Comments Komentari

Settings

Setting Translation
Library Biblioteka
Resource Resursi
Variables Varijable
Name  
Documentation Dokumentacija
Metadata Metadata
Suite Setup Suite Postavke
Suite Teardown Suite Teardown
Test Setup Test Postavke
Task Setup Task Postavke
Test Teardown Test Teardown
Task Teardown Task Teardown
Test Template Test Template
Task Template Task Template
Test Timeout Test Timeout
Task Timeout Task Timeout
Test Tags Test Tagovi
Task Tags Task Tagovi
Keyword Tags Keyword Tagovi
Tags Tagovi
Setup Postavke
Teardown Teardown
Template Template
Timeout Timeout
Arguments Argumenti

BDD prefixes

Prefix Translation
Given Uslovno
When Kada
Then Tada
And I
But Ali

Boolean strings

True/False Values
True  
False  

6.3.3   Czech (cs)

Section headers

Header Translation
Settings Nastavení
Variables Proměnné
Test Cases Testovací případy
Tasks Úlohy
Keywords Klíčová slova
Comments Komentáře

Settings

Setting Translation
Library Knihovna
Resource Zdroj
Variables Proměnná
Name Název
Documentation Dokumentace
Metadata Metadata
Suite Setup Příprava sady
Suite Teardown Ukončení sady
Test Setup Příprava testu
Task Setup Příprava úlohy
Test Teardown Ukončení testu
Task Teardown Ukončení úlohy
Test Template Šablona testu
Task Template Šablona úlohy
Test Timeout Časový limit testu
Task Timeout Časový limit úlohy
Test Tags Štítky testů
Task Tags Štítky úloh
Keyword Tags Štítky klíčových slov
Tags Štítky
Setup Příprava
Teardown Ukončení
Template Šablona
Timeout Časový limit
Arguments Argumenty

BDD prefixes

Prefix Translation
Given Pokud
When Když
Then Pak
And A
But Ale

Boolean strings

True/False Values
True Pravda, Ano, Zapnuto
False Nepravda, Ne, Vypnuto, Nic

6.3.4   German (de)

Section headers

Header Translation
Settings Einstellungen
Variables Variablen
Test Cases Testfälle
Tasks Aufgaben
Keywords Schlüsselwörter
Comments Kommentare

Settings

Setting Translation
Library Bibliothek
Resource Ressource
Variables Variablen
Name Name
Documentation Dokumentation
Metadata Metadaten
Suite Setup Suitevorbereitung
Suite Teardown Suitenachbereitung
Test Setup Testvorbereitung
Task Setup Aufgabenvorbereitung
Test Teardown Testnachbereitung
Task Teardown Aufgabennachbereitung
Test Template Testvorlage
Task Template Aufgabenvorlage
Test Timeout Testzeitlimit
Task Timeout Aufgabenzeitlimit
Test Tags Testmarker
Task Tags Aufgabenmarker
Keyword Tags Schlüsselwortmarker
Tags Marker
Setup Vorbereitung
Teardown Nachbereitung
Template Vorlage
Timeout Zeitlimit
Arguments Argumente

BDD prefixes

Prefix Translation
Given Angenommen
When Wenn
Then Dann
And Und
But Aber

Boolean strings

True/False Values
True Wahr, Ja, An, Ein
False Falsch, Nein, Aus, Unwahr

6.3.5   Spanish (es)

Section headers

Header Translation
Settings Configuraciones
Variables Variables
Test Cases Casos de prueba
Tasks Tareas
Keywords Palabras clave
Comments Comentarios

Settings

Setting Translation
Library Biblioteca
Resource Recursos
Variables Variable
Name Nombre
Documentation Documentación
Metadata Metadatos
Suite Setup Configuración de la Suite
Suite Teardown Desmontaje de la Suite
Test Setup Configuración de prueba
Task Setup Configuración de tarea
Test Teardown Desmontaje de la prueba
Task Teardown Desmontaje de tareas
Test Template Plantilla de prueba
Task Template Plantilla de tareas
Test Timeout Tiempo de espera de la prueba
Task Timeout Tiempo de espera de las tareas
Test Tags Etiquetas de la prueba
Task Tags Etiquetas de las tareas
Keyword Tags Etiquetas de palabras clave
Tags Etiquetas
Setup Configuración
Teardown Desmontaje
Template Plantilla
Timeout Tiempo agotado
Arguments Argumentos

BDD prefixes

Prefix Translation
Given Dado
When Cuando
Then Entonces
And Y
But Pero

Boolean strings

True/False Values
True Verdadero, Si, On
False Falso, No, Off, Ninguno

6.3.6   Finnish (fi)

Section headers

Header Translation
Settings Asetukset
Variables Muuttujat
Test Cases Testit
Tasks Tehtävät
Keywords Avainsanat
Comments Kommentit

Settings

Setting Translation
Library Kirjasto
Resource Resurssi
Variables Muuttujat
Name Nimi
Documentation Dokumentaatio
Metadata Metatiedot
Suite Setup Setin Alustus
Suite Teardown Setin Alasajo
Test Setup Testin Alustus
Task Setup Tehtävän Alustus
Test Teardown Testin Alasajo
Task Teardown Tehtävän Alasajo
Test Template Testin Malli
Task Template Tehtävän Malli
Test Timeout Testin Aikaraja
Task Timeout Tehtävän Aikaraja
Test Tags Testin Tagit
Task Tags Tehtävän Tagit
Keyword Tags Avainsanan Tagit
Tags Tagit
Setup Alustus
Teardown Alasajo
Template Malli
Timeout Aikaraja
Arguments Argumentit

BDD prefixes

Prefix Translation
Given Oletetaan
When Kun
Then Niin
And Ja
But Mutta

Boolean strings

True/False Values
True Tosi, Kyllä, Päällä
False Epätosi, Ei, Pois

6.3.7   French (fr)

Section headers

Header Translation
Settings Paramètres
Variables Variables
Test Cases Unités de test
Tasks Tâches
Keywords Mots-clés
Comments Commentaires

Settings

Setting Translation
Library Bibliothèque
Resource Ressource
Variables Variable
Name Nom
Documentation Documentation
Metadata Méta-donnée
Suite Setup Mise en place de suite
Suite Teardown Démontage de suite
Test Setup Mise en place de test
Task Setup Mise en place de tâche
Test Teardown Démontage de test
Task Teardown Démontage de test
Test Template Modèle de test
Task Template Modèle de tâche
Test Timeout Délai de test
Task Timeout Délai de tâche
Test Tags Étiquette de test
Task Tags Étiquette de tâche
Keyword Tags Etiquette de mot-clé
Tags Étiquette
Setup Mise en place
Teardown Démontage
Template Modèle
Timeout Délai d'attente
Arguments Arguments

BDD prefixes

Prefix Translation
Given Étant donné
When Lorsque
Then Alors
And Et
But Mais

Boolean strings

True/False Values
True Vrai, Oui, Actif
False Faux, Non, Désactivé, Aucun

6.3.8   Hindi (hi)

Section headers

Header Translation
Settings स्थापना
Variables चर
Test Cases नियत कार्य प्रवेशिका
Tasks कार्य प्रवेशिका
Keywords कुंजीशब्द
Comments टिप्पणी

Settings

Setting Translation
Library कोड़ प्रतिबिंब संग्रह
Resource संसाधन
Variables चर
Name  
Documentation प्रलेखन
Metadata अधि-आंकड़ा
Suite Setup जांच की शुरुवात
Suite Teardown परीक्षण कार्य अंत
Test Setup परीक्षण कार्य प्रारंभ
Task Setup परीक्षण कार्य प्रारंभ
Test Teardown परीक्षण कार्य अंत
Task Teardown परीक्षण कार्य अंत
Test Template परीक्षण ढांचा
Task Template परीक्षण ढांचा
Test Timeout परीक्षण कार्य समय समाप्त
Task Timeout कार्य समयबाह्य
Test Tags जाँचका उपनाम
Task Tags कार्यका उपनाम
Keyword Tags कुंजीशब्द का उपनाम
Tags निशान
Setup व्यवस्थापना
Teardown विमोचन
Template साँचा
Timeout समय समाप्त
Arguments प्राचल

BDD prefixes

Prefix Translation
Given दिया हुआ
When जब
Then तब
And और
But परंतु

Boolean strings

True/False Values
True यथार्थ, निश्चित, हां, पर
False गलत, नहीं, हालाँकि, यद्यपि, नहीं, हैं

6.3.9   Italian (it)

Section headers

Header Translation
Settings Impostazioni
Variables Variabili
Test Cases Casi Di Test
Tasks Attività
Keywords Parole Chiave
Comments Commenti

Settings

Setting Translation
Library Libreria
Resource Risorsa
Variables Variabile
Name Nome
Documentation Documentazione
Metadata Metadati
Suite Setup Configurazione Suite
Suite Teardown Distruzione Suite
Test Setup Configurazione Test
Task Setup Configurazione Attività
Test Teardown Distruzione Test
Task Teardown Distruzione Attività
Test Template Modello Test
Task Template Modello Attività
Test Timeout Timeout Test
Task Timeout Timeout Attività
Test Tags Tag Del Test
Task Tags Tag Attività
Keyword Tags Tag Parola Chiave
Tags Tag
Setup Configurazione
Teardown Distruzione
Template Template
Timeout Timeout
Arguments Parametri

BDD prefixes

Prefix Translation
Given Dato
When Quando
Then Allora
And E
But Ma

Boolean strings

True/False Values
True Vero, Sì, On
False Falso, No, Off, Nessuno

6.3.10   Japanese (ja)

New in Robot Framework 7.0.1.

Section headers

Header Translation
Settings 設定
Variables 変数
Test Cases テスト ケース
Tasks タスク
Keywords キーワード
Comments コメント

Settings

Setting Translation
Library ライブラリ
Resource リソース
Variables 変数
Name 名前
Documentation ドキュメント
Metadata メタデータ
Suite Setup スイート セットアップ
Suite Teardown スイート ティアダウン
Test Setup テスト セットアップ
Task Setup タスク セットアップ
Test Teardown テスト ティアダウン
Task Teardown タスク ティアダウン
Test Template テスト テンプレート
Task Template タスク テンプレート
Test Timeout テスト タイムアウト
Task Timeout タスク タイムアウト
Test Tags テスト タグ
Task Tags タスク タグ
Keyword Tags キーワード タグ
Tags タグ
Setup セットアップ
Teardown ティアダウン
Template テンプレート
Timeout タイムアウト
Arguments 引数

BDD prefixes

Prefix Translation
Given 仮定, 指定, 前提条件
When 条件, 次の場合, もし, 実行条件
Then アクション, その時, 動作
And および, 及び, かつ, 且つ, ならびに, 並びに, そして, それから
But ただし, 但し

Boolean strings

True/False Values
True 真, 有効, はい, オン
False 偽, 無効, いいえ, オフ

6.3.11   Korean (ko)

New in Robot Framework 7.1.

Section headers

Header Translation
Settings 설정
Variables 변수
Test Cases 테스트 사례
Tasks 작업
Keywords 키워드
Comments 의견

Settings

Setting Translation
Library 라이브러리
Resource 자료
Variables 변수
Name 이름
Documentation 문서
Metadata 메타데이터
Suite Setup 스위트 설정
Suite Teardown 스위트 중단
Test Setup 테스트 설정
Task Setup 작업 설정
Test Teardown 테스트 중단
Task Teardown 작업 중단
Test Template 테스트 템플릿
Task Template 작업 템플릿
Test Timeout 테스트 시간 초과
Task Timeout 작업 시간 초과
Test Tags 테스트 태그
Task Tags 작업 태그
Keyword Tags 키워드 태그
Tags 태그
Setup 설정
Teardown 중단
Template 템플릿
Timeout 시간 초과
Arguments 주장

BDD prefixes

Prefix Translation
Given 주어진
When
Then 보다
And 그리고
But 하지만

Boolean strings

True/False Values
True 참, 네, 켜기
False 거짓, 아니오, 끄기

6.3.12   Dutch (nl)

Section headers

Header Translation
Settings Instellingen
Variables Variabelen
Test Cases Testgevallen
Tasks Taken
Keywords Actiewoorden
Comments Opmerkingen

Settings

Setting Translation
Library Bibliotheek
Resource Resource
Variables Variabele
Name Naam
Documentation Documentatie
Metadata Metadata
Suite Setup Suitevoorbereiding
Suite Teardown Suite-afronding
Test Setup Testvoorbereiding
Task Setup Taakvoorbereiding
Test Teardown Testafronding
Task Teardown Taakafronding
Test Template Testsjabloon
Task Template Taaksjabloon
Test Timeout Testtijdslimiet
Task Timeout Taaktijdslimiet
Test Tags Testlabels
Task Tags Taaklabels
Keyword Tags Actiewoordlabels
Tags Labels
Setup Voorbereiding
Teardown Afronding
Template Sjabloon
Timeout Tijdslimiet
Arguments Parameters

BDD prefixes

Prefix Translation
Given Stel, Gegeven
When Als
Then Dan
And En
But Maar

Boolean strings

True/False Values
True Waar, Ja, Aan
False Onwaar, Nee, Uit, Geen

6.3.13   Polish (pl)

Section headers

Header Translation
Settings Ustawienia
Variables Zmienne
Test Cases Przypadki Testowe
Tasks Zadania
Keywords Słowa Kluczowe
Comments Komentarze

Settings

Setting Translation
Library Biblioteka
Resource Zasób
Variables Zmienne
Name Nazwa
Documentation Dokumentacja
Metadata Metadane
Suite Setup Inicjalizacja Zestawu
Suite Teardown Ukończenie Zestawu
Test Setup Inicjalizacja Testu
Task Setup Inicjalizacja Zadania
Test Teardown Ukończenie Testu
Task Teardown Ukończenie Zadania
Test Template Szablon Testu
Task Template Szablon Zadania
Test Timeout Limit Czasowy Testu
Task Timeout Limit Czasowy Zadania
Test Tags Znaczniki Testu
Task Tags Znaczniki Zadania
Keyword Tags Znaczniki Słowa Kluczowego
Tags Znaczniki
Setup Inicjalizacja
Teardown Ukończenie
Template Szablon
Timeout Limit Czasowy
Arguments Argumenty

BDD prefixes

Prefix Translation
Given Zakładając, Zakładając, że, Mając
When Jeżeli, Jeśli, Gdy, Kiedy
Then Wtedy
And Oraz, I
But Ale

Boolean strings

True/False Values
True Prawda, Tak, Włączone
False Fałsz, Nie, Wyłączone, Nic

6.3.14   Portuguese (pt)

Section headers

Header Translation
Settings Definições
Variables Variáveis
Test Cases Casos de Teste
Tasks Tarefas
Keywords Palavras-Chave
Comments Comentários

Settings

Setting Translation
Library Biblioteca
Resource Recurso
Variables Variável
Name Nome
Documentation Documentação
Metadata Metadados
Suite Setup Inicialização de Suíte
Suite Teardown Finalização de Suíte
Test Setup Inicialização de Teste
Task Setup Inicialização de Tarefa
Test Teardown Finalização de Teste
Task Teardown Finalização de Tarefa
Test Template Modelo de Teste
Task Template Modelo de Tarefa
Test Timeout Tempo Limite de Teste
Task Timeout Tempo Limite de Tarefa
Test Tags Etiquetas de Testes
Task Tags Etiquetas de Tarefas
Keyword Tags Etiquetas de Palavras-Chave
Tags Etiquetas
Setup Inicialização
Teardown Finalização
Template Modelo
Timeout Tempo Limite
Arguments Argumentos

BDD prefixes

Prefix Translation
Given Dado
When Quando
Then Então
And E
But Mas

Boolean strings

True/False Values
True Verdadeiro, Verdade, Sim, Ligado
False Falso, Não, Desligado, Desativado, Nada

6.3.15   Brazilian Portuguese (pt-BR)

Section headers

Header Translation
Settings Configurações
Variables Variáveis
Test Cases Casos de Teste
Tasks Tarefas
Keywords Palavras-Chave
Comments Comentários

Settings

Setting Translation
Library Biblioteca
Resource Recurso
Variables Variável
Name Nome
Documentation Documentação
Metadata Metadados
Suite Setup Configuração da Suíte
Suite Teardown Finalização de Suíte
Test Setup Inicialização de Teste
Task Setup Inicialização de Tarefa
Test Teardown Finalização de Teste
Task Teardown Finalização de Tarefa
Test Template Modelo de Teste
Task Template Modelo de Tarefa
Test Timeout Tempo Limite de Teste
Task Timeout Tempo Limite de Tarefa
Test Tags Test Tags
Task Tags Task Tags
Keyword Tags Keyword Tags
Tags Etiquetas
Setup Inicialização
Teardown Finalização
Template Modelo
Timeout Tempo Limite
Arguments Argumentos

BDD prefixes

Prefix Translation
Given Dado
When Quando
Then Então
And E
But Mas

Boolean strings

True/False Values
True Verdadeiro, Verdade, Sim, Ligado
False Falso, Não, Desligado, Desativado, Nada

6.3.16   Romanian (ro)

Section headers

Header Translation
Settings Setari
Variables Variabile
Test Cases Cazuri De Test
Tasks Sarcini
Keywords Cuvinte Cheie
Comments Comentarii

Settings

Setting Translation
Library Librarie
Resource Resursa
Variables Variabila
Name Nume
Documentation Documentatie
Metadata Metadate
Suite Setup Configurare De Suita
Suite Teardown Configurare De Intrerupere
Test Setup Setare De Test
Task Setup Configuarare activitate
Test Teardown Inrerupere De Test
Task Teardown Intrerupere activitate
Test Template Sablon De Test
Task Template Sablon de activitate
Test Timeout Timp Expirare Test
Task Timeout Timp de expirare activitate
Test Tags Taguri De Test
Task Tags Etichete activitate
Keyword Tags Etichete metode
Tags Etichete
Setup Setare
Teardown Intrerupere
Template Sablon
Timeout Expirare
Arguments Argumente

BDD prefixes

Prefix Translation
Given Fie ca
When Cand
Then Atunci
And Si
But Dar

Boolean strings

True/False Values
True Adevarat, Da, Cand
False Fals, Nu, Oprit, Niciun

6.3.17   Russian (ru)

Section headers

Header Translation
Settings Настройки
Variables Переменные
Test Cases Заголовки тестов
Tasks Задача
Keywords Ключевые слова
Comments Комментарии

Settings

Setting Translation
Library Библиотека
Resource Ресурс
Variables Переменные
Name  
Documentation Документация
Metadata Метаданные
Suite Setup Инициализация комплекта тестов
Suite Teardown Завершение комплекта тестов
Test Setup Инициализация теста
Task Setup Инициализация задания
Test Teardown Завершение теста
Task Teardown Завершение задания
Test Template Шаблон теста
Task Template Шаблон задания
Test Timeout Лимит выполнения теста
Task Timeout Лимит задания
Test Tags Теги тестов
Task Tags Метки заданий
Keyword Tags Метки ключевых слов
Tags Метки
Setup Инициализация
Teardown Завершение
Template Шаблон
Timeout Лимит
Arguments Аргументы

BDD prefixes

Prefix Translation
Given Дано
When Когда
Then Тогда
And И
But Но

Boolean strings

True/False Values
True  
False  

6.3.18   Swedish (sv)

Section headers

Header Translation
Settings Inställningar
Variables Variabler
Test Cases Testfall
Tasks Taskar
Keywords Nyckelord
Comments Kommentarer

Settings

Setting Translation
Library Bibliotek
Resource Resurs
Variables Variabel
Name Namn
Documentation Dokumentation
Metadata Metadata
Suite Setup Svit konfigurering
Suite Teardown Svit nedrivning
Test Setup Test konfigurering
Task Setup Task konfigurering
Test Teardown Test nedrivning
Task Teardown Task nedrivning
Test Template Test mall
Task Template Task mall
Test Timeout Test timeout
Task Timeout Task timeout
Test Tags Test taggar
Task Tags Arbetsuppgift taggar
Keyword Tags Nyckelord taggar
Tags Taggar
Setup Konfigurering
Teardown Nedrivning
Template Mall
Timeout Timeout
Arguments Argument

BDD prefixes

Prefix Translation
Given Givet
When När
Then
And Och
But Men

Boolean strings

True/False Values
True Sant, Ja, På
False Falskt, Nej, Av, Ingen

6.3.19   Thai (th)

Section headers

Header Translation
Settings การตั้งค่า
Variables กำหนดตัวแปร
Test Cases การทดสอบ
Tasks งาน
Keywords คำสั่งเพิ่มเติม
Comments คำอธิบาย

Settings

Setting Translation
Library ชุดคำสั่งที่ใช้
Resource ไฟล์ที่ใช้
Variables ชุดตัวแปร
Name  
Documentation เอกสาร
Metadata รายละเอียดเพิ่มเติม
Suite Setup กำหนดค่าเริ่มต้นของชุดการทดสอบ
Suite Teardown คืนค่าของชุดการทดสอบ
Test Setup กำหนดค่าเริ่มต้นของการทดสอบ
Task Setup กำหนดค่าเริ่มต้นของงาน
Test Teardown คืนค่าของการทดสอบ
Task Teardown คืนค่าของงาน
Test Template โครงสร้างของการทดสอบ
Task Template โครงสร้างของงาน
Test Timeout เวลารอของการทดสอบ
Task Timeout เวลารอของงาน
Test Tags กลุ่มของการทดสอบ
Task Tags กลุ่มของงาน
Keyword Tags กลุ่มของคำสั่งเพิ่มเติม
Tags กลุ่ม
Setup กำหนดค่าเริ่มต้น
Teardown คืนค่า
Template โครงสร้าง
Timeout หมดเวลา
Arguments ค่าที่ส่งเข้ามา

BDD prefixes

Prefix Translation
Given กำหนดให้
When เมื่อ
Then ดังนั้น
And และ
But แต่

Boolean strings

True/False Values
True  
False  

6.3.20   Turkish (tr)

Section headers

Header Translation
Settings Ayarlar
Variables Değişkenler
Test Cases Test Durumları
Tasks Görevler
Keywords Anahtar Kelimeler
Comments Yorumlar

Settings

Setting Translation
Library Kütüphane
Resource Kaynak
Variables Değişkenler
Name  
Documentation Dokümantasyon
Metadata Üstveri
Suite Setup Takım Kurulumu
Suite Teardown Takım Bitişi
Test Setup Test Kurulumu
Task Setup Görev Kurulumu
Test Teardown Test Bitişi
Task Teardown Görev Bitişi
Test Template Test Taslağı
Task Template Görev Taslağı
Test Timeout Test Zaman Aşımı
Task Timeout Görev Zaman Aşımı
Test Tags Test Etiketleri
Task Tags Görev Etiketleri
Keyword Tags Anahtar Kelime Etiketleri
Tags Etiketler
Setup Kurulum
Teardown Bitiş
Template Taslak
Timeout Zaman Aşımı
Arguments Argümanlar

BDD prefixes

Prefix Translation
Given Diyelim ki
When Eğer ki
Then O zaman
And Ve
But Ancak

Boolean strings

True/False Values
True Doğru, Evet, Açik
False Yanliş, Hayir, Kapali

6.3.21   Ukrainian (uk)

Section headers

Header Translation
Settings Налаштування
Variables Змінні
Test Cases Тест-кейси
Tasks Завдань
Keywords Ключових слова
Comments Коментарів

Settings

Setting Translation
Library Бібліотека
Resource Ресурс
Variables Змінна
Name  
Documentation Документація
Metadata Метадані
Suite Setup Налаштування Suite
Suite Teardown Розбірка Suite
Test Setup Налаштування тесту
Task Setup Налаштування завдання
Test Teardown Розбирання тестy
Task Teardown Розбір завдання
Test Template Тестовий шаблон
Task Template Шаблон завдання
Test Timeout Час тестування
Task Timeout Час очікування завдання
Test Tags Тестові теги
Task Tags Теги завдань
Keyword Tags Теги ключових слів
Tags Теги
Setup Встановлення
Teardown Cпростовувати пункт за пунктом
Template Шаблон
Timeout Час вийшов
Arguments Аргументи

BDD prefixes

Prefix Translation
Given Дано
When Коли
Then Тоді
And Та
But Але

Boolean strings

True/False Values
True  
False  

6.3.22   Vietnamese (vi)

New in Robot Framework 6.1.

Section headers

Header Translation
Settings Cài Đặt
Variables Các biến số
Test Cases Các kịch bản kiểm thử
Tasks Các nghiệm vụ
Keywords Các từ khóa
Comments Các chú thích

Settings

Setting Translation
Library Thư viện
Resource Tài nguyên
Variables Biến số
Name Tên
Documentation Tài liệu hướng dẫn
Metadata Dữ liệu tham chiếu
Suite Setup Tiền thiết lập bộ kịch bản kiểm thử
Suite Teardown Hậu thiết lập bộ kịch bản kiểm thử
Test Setup Tiền thiết lập kịch bản kiểm thử
Task Setup Tiền thiểt lập nhiệm vụ
Test Teardown Hậu thiết lập kịch bản kiểm thử
Task Teardown Hậu thiết lập nhiệm vụ
Test Template Mẫu kịch bản kiểm thử
Task Template Mẫu nhiễm vụ
Test Timeout Thời gian chờ kịch bản kiểm thử
Task Timeout Thời gian chờ nhiệm vụ
Test Tags Các nhãn kịch bản kiểm thử
Task Tags Các nhãn nhiệm vụ
Keyword Tags Các từ khóa nhãn
Tags Các thẻ
Setup Tiền thiết lập
Teardown Hậu thiết lập
Template Mẫu
Timeout Thời gian chờ
Arguments Các đối số

BDD prefixes

Prefix Translation
Given Đã cho
When Khi
Then Thì
And
But Nhưng

Boolean strings

True/False Values
True Đúng, Vâng, Mở
False Sai, Không, Tắt, Không Có Gì

6.3.23   Chinese Simplified (zh-CN)

Section headers

Header Translation
Settings 设置
Variables 变量
Test Cases 用例
Tasks 任务
Keywords 关键字
Comments 备注

Settings

Setting Translation
Library 程序库
Resource 资源文件
Variables 变量文件
Name  
Documentation 说明
Metadata 元数据
Suite Setup 用例集启程
Suite Teardown 用例集终程
Test Setup 用例启程
Task Setup 任务启程
Test Teardown 用例终程
Task Teardown 任务终程
Test Template 用例模板
Task Template 任务模板
Test Timeout 用例超时
Task Timeout 任务超时
Test Tags 用例标签
Task Tags 任务标签
Keyword Tags 关键字标签
Tags 标签
Setup 启程
Teardown 终程
Template 模板
Timeout 超时
Arguments 参数

BDD prefixes

Prefix Translation
Given 假定
When
Then 那么
And 并且
But 但是

Boolean strings

True/False Values
True 真, 是, 开
False 假, 否, 关, 空

6.3.24   Chinese Traditional (zh-TW)

Section headers

Header Translation
Settings 設置
Variables 變量
Test Cases 案例
Tasks 任務
Keywords 關鍵字
Comments 備註

Settings

Setting Translation
Library 函式庫
Resource 資源文件
Variables 變量文件
Name  
Documentation 說明
Metadata 元數據
Suite Setup 測試套啟程
Suite Teardown 測試套終程
Test Setup 測試啟程
Task Setup 任務啟程
Test Teardown 測試終程
Task Teardown 任務終程
Test Template 測試模板
Task Template 任務模板
Test Timeout 測試逾時
Task Timeout 任務逾時
Test Tags 測試標籤
Task Tags 任務標籤
Keyword Tags 關鍵字標籤
Tags 標籤
Setup 啟程
Teardown 終程
Template 模板
Timeout 逾時
Arguments 参数

BDD prefixes

Prefix Translation
Given 假定
When
Then 那麼
And 並且
But 但是

Boolean strings

True/False Values
True 真, 是, 開
False 假, 否, 關, 空

6.4   Documentation formatting

It is possible to use simple HTML formatting with test suite, test case and user keyword documentation and free suite metadata in the test data, as well as when documenting test libraries. The formatting is similar to the style used in most wikis, and it is designed to be understandable both as plain text and after the HTML transformation.

6.4.1   Handling whitespace in test data

Newlines

When documenting test suites, test cases and user keywords or adding metadata to test suites, newlines can be added manually using \n escape sequence.

*** Settings ***
Documentation    First line.\n\nSecond paragraph. This time\nwith multiple lines.
Metadata         Example list    - first item\n- second item\n- third

Note

As explained in the Paragraphs section below, the single newline in Second paragraph, this time\nwith multiple lines. does not actually affect how that paragraph is rendered. Newlines are needed when creating lists or other such constructs, though.

Adding newlines manually to a long documentation takes some effort and extra characters also make the documentation harder to read. This can be avoided, though, as newlines are inserted automatically between continued documentation and metadata lines. In practice this means that the above example could be written also as follows.

*** Settings ***
Documentation
...    First line.
...
...    Second paragraph. This time
...    with multiple lines.
Metadata
...    Example list
...    - first item
...    - second item
...    - third

No automatic newline is added if a line already ends with a literal newline or if it ends with an escaping backslash:

*** Test Cases ***
Ends with newline
    [Documentation]    Ends with a newline and\n
    ...                automatic newline is not added.

Ends with backslash
    [Documentation]    Ends with a backslash and \
    ...                no newline is added.

Spaces

Unlike elsewhere in Robot Framework data, leading spaces and consecutive internal spaces are preserved in documentation and metadata. This makes it possible, for example, to split list items to multiple rows and have preformatted text with spaces:

*** Test Cases ***
Long list item
    [Documentation]
    ...    List:
    ...    - Short item.
    ...    - Second item is pretty long and it is split to
    ...      multiple rows. Leading spaces are preserved.
    ...    - Another short item.

Preformatted text
    [Documentation]
    ...    Example with consecutive internal spaces:
    ...
    ...    | *** Test Cases ***
    ...    | Example
    ...    |     Keyword

Note

Preserving spaces in documentation and metadata is new in Robot Framework 6.1. With earlier versions spaces need to be escaped with a backslash.

6.4.2   Paragraphs

All regular text in the formatted HTML documentation is represented as paragraphs. In practice, lines separated by a single newline will be combined in a paragraph regardless whether the newline is added manually or automatically. Multiple paragraphs can be separated with an empty line (i.e. two newlines) and also tables, lists, and other specially formatted blocks discussed in subsequent sections end a paragraph.

For example, the following test suite or resource file documentation:

*** Settings ***
Documentation
...    First paragraph has only one line.
...
...    Second paragraph, this time created
...    with multiple lines.

will be formatted in HTML as:

First paragraph has only one line.

Second paragraph, this time created with multiple lines.

6.4.3   Inline styles

The documentation syntax supports inline styles bold, italic and code. Bold text can be created by having an asterisk before and after the selected word or words, for example *this is bold*. Italic style works similarly, but the special character to use is an underscore, for example, _italic_. It is also possible to have bold italic with the syntax _*bold italic*_.

The code style is created using double backticks like ``code``. The result is monospaced text with light gray background.

Asterisks, underscores or double backticks alone, or in the middle of a word, do not start formatting, but punctuation characters before or after them are allowed. When multiple lines form a paragraph, all inline styles can span over multiple lines.

Inline style examples
Unformatted Formatted
*bold* bold
_italic_ italic
_*bold italic*_ bold italic
``code`` code
*bold*, then _italic_ and finally ``some code`` bold, then italic and finally some code
This is *bold\n
on multiple\n
lines*.
This is bold
on multiple
lines.

6.4.4   URLs

All strings that look like URLs are automatically converted into clickable links. Additionally, URLs that end with extension .jpg, .jpeg, .png, .gif, .bmp or .svg (case-insensitive) will automatically create images. For example, URLs like http://example.com are turned into links, and http:///host/image.jpg and file:///path/chart.png into images.

The automatic conversion of URLs to links is applied to all the data in logs and reports, but creating images is done only for test suite, test case and keyword documentation, and for test suite metadata.

Note

.svg image support is new in Robot Framework 3.2.

6.4.6   Section titles

If documentation gets longer, it is often a good idea to split it into sections. It is possible to separate sections with titles using syntax = My Title =, where the number of equal signs denotes the level of the title:

= First section =

== Subsection ==

Some text.

== Second subsection ==

More text.

= Second section =

You probably got the idea.

Notice that only three title levels are supported and that spaces between equal signs and the title text are mandatory.

6.4.7   Tables

Tables are created using pipe characters with spaces around them as column separators and newlines as row separators. Header cells can be created by surrounding the cell content with equal signs and optional spaces like = Header = or =Header=. Tables cells can also contain links and formatting such as bold and italic:

| =A= |  =B=  | = C =  |
| _1_ | Hello | world! |
| _2_ | Hi    |

The created table always has a thin border and normal text is left-aligned. Text in header cells is bold and centered. Empty cells are automatically added to make rows equally long. For example, the above example would be formatted like this in HTML:

ABC
1Helloworld
2Hi

6.4.8   Lists

Lists are created by starting a line with a hyphen and space ('- '). List items can be split into multiple lines by indenting continuing lines with one or more spaces. A line that does not start with '- ' and is not indented ends the list:

Example:
- a list item
- second list item
  is continued

This is outside the list.

The above documentation is formatted like this in HTML:

Example:

  • a list item
  • second list item is continued

This is outside the list.

6.4.9   Preformatted text

It is possible to embed blocks of preformatted text in the documentation. Preformatted block is created by starting lines with '| ', one space being mandatory after the pipe character except on otherwise empty lines. The starting '| ' sequence will be removed from the resulting HTML, but all other whitespace is preserved.

In the following documentation, the two middle lines form a preformatted block when converted to HTML:

Doc before block:
| inside block
|    some   additional whitespace
After block.

The above documentation is formatted like this:

Doc before block:

inside block
  some   additional whitespace

After block.

6.4.10   Horizontal ruler

Horizontal rulers (the <hr> tag) make it possible to separate larger sections from each others, and they can be created by having three or more hyphens alone on a line:

Some text here.

---

More text...

The above documentation is formatted like this:

Some text here.


More text...

6.5   Time format

Robot Framework has its own time format that is both flexible to use and easy to understand. It is used by several keywords (for example, BuiltIn keywords Sleep and Wait Until Keyword Succeeds), DateTime library, and timeouts.

6.5.1   Time as number

The time can always be given as a plain number, in which case it is interpreted to be seconds. Both integers and floating point numbers work, and it is possible to use either real numbers or strings containing numerical values.

Note

In some contexts plain numbers can be interpreted otherwise as times. For example, with WHILE loop limit integers denote the maximum iteration count.

6.5.2   Time as time string

Representing the time as a time string means using a format such as 2 minutes 42 seconds, which is normally easier to understand than just having the value as seconds. It is, for example, not so easy to understand how long a time 4200 is in seconds, but 1 hour 10 minutes is clear immediately.

The basic idea of this format is having first a number and then a text specifying what time that number represents. Numbers can be either integers or floating point numbers, the whole format is case and space insensitive, and it is possible to add - prefix to specify negative times. The available time specifiers are:

  • weeks, week, w
  • days, day, d
  • hours, hour, h
  • minutes, minute, mins, min, m
  • seconds, second, secs, sec, s
  • milliseconds, millisecond, millis, ms
  • microseconds, microsecond, us, μs
  • nanoseconds, nanosecond, ns

Examples:

1 min 30 secs
1.5 minutes
90 s
1 day 2 hours 3 minutes 4 seconds 5 milliseconds 6 microseconds 7 nanoseconds
8 weeks 7 days 6 hours 5 minutes 4 seconds 3 milliseconds 2 microseconds 1 nanosecond
1d 2h 3m 4s 5ms 6μs 7 ns
8w 7d 6h 5m 4s 3ms 2μs 1ns
- 10 seconds

Note

Support for micro and nanoseconds is new in Robot Framework 6.0. Support for weeks is new in Robot Framework 7.1.

6.5.3   Time as "timer" string

Time can also be given in timer like format hh:mm:ss.mil. In this format both hour and millisecond parts are optional, leading and trailing zeros can be left out when they are not meaningful, and negative times can be represented by adding the - prefix. For example, following timer and time string values are identical:

Timer and time string examples
Timer Time string
00:00:01 1 second
01:02:03 1 hour 2 minutes 3 seconds
1:00:00 1 hour
100:00:00 100 hours
00:02 2 seconds
42:00 42 minutes
00:01:02.003 1 minute 2 seconds 3 milliseconds
00:01.5 1.5 seconds
-01:02.345 - 1 minute 2 seconds 345 milliseconds

6.6   Boolean arguments

Many keywords in Robot Framework standard libraries accept arguments that are handled as Boolean values true or false. If such an argument is given as a string, it is considered false if it is an empty string or equal to FALSE, NONE, NO, OFF or 0, case-insensitively. Other strings are considered true unless the keyword documentation explicitly states otherwise, and other argument types are tested using the same rules as in Python.

*** Keywords ***
True examples
    Should Be Equal    ${x}    ${y}    Custom error    values=True         # Strings are generally true.
    Should Be Equal    ${x}    ${y}    Custom error    values=yes          # Same as the above.
    Should Be Equal    ${x}    ${y}    Custom error    values=${TRUE}      # Python `True` is true.
    Should Be Equal    ${x}    ${y}    Custom error    values=${42}        # Numbers other than 0 are true.

False examples
    Should Be Equal    ${x}    ${y}    Custom error    values=False        # String `false` is false.
    Should Be Equal    ${x}    ${y}    Custom error    values=no           # Also string `no` is false.
    Should Be Equal    ${x}    ${y}    Custom error    values=${EMPTY}     # Empty string is false.
    Should Be Equal    ${x}    ${y}    Custom error    values=${FALSE}     # Python `False` is false.
    Should Be Equal    ${x}    ${y}    Custom error    values=no values    # Special false string with this keyword.

Note

Considering OFF and 0 false is new in Robot Framework 3.1.

6.7   Evaluating expressions

This appendix explains how expressions are evaluated using Python in different contexts and how variables in expressions are handled.

6.7.1   Introduction

Constructs such as IF/ELSE structures, WHILE loops and inline Python evaluation as well as several BuiltIn keywords accept an expression that is evaluated in Python:

*** Test Cases ***
IF/ELSE
    IF    ${x} > 0
        Log to console   ${x} is positive
    ELSE
        Log to console   ${x} is negative
    END

Inline Python evaluation
    Log to console    ${x} is ${{'positive' if ${x} > 0 else 'negative'}}

Evaluate keyword
    ${type} =    Evaluate    'positive' if ${x} > 0 else 'negative'
    Log to console    ${x} is ${type}

Should Be True keyword
    Should Be True    ${x} > 0

Notice that instead of creating complicated expressions, it is often better to move the logic into a test library. That typically eases maintenance and also enhances execution speed.

6.7.2   Evaluation namespace

Expressions are evaluated using Python's eval function so that normal Python constructs like '${x}' == 'expected', ${x} > 0 and '${x}'.upper() not in ('FAIL', 'BAD') can be used and all builtin functions like len() and int() are available. In addition to that, all unrecognized Python variables are considered to be modules that are automatically imported. It is possible to use all available Python modules, including the standard modules and the installed third party modules.

The following examples demonstrate using Python builtins as well as modules using the inline Python evaluation syntax, but same expressions would also work with IF/ELSE structures and BuiltIn keywords without the need to use the ${{}} decoration around the expression:

*** Variables ***
${VAR}           123

*** Test Cases ***
Python syntax
    Should Be True       ${{'${VAR}' == '123'}}
    Should Be True       ${{'${VAR}'.startswith('x') or '${VAR}' in '012345'}}

Python builtins
    Should Be Equal      ${{len('${VAR}')}}        ${3}
    Should Be Equal      ${{int('${VAR}')}}        ${123}

Access modules
    Should Be Equal      ${{os.sep}}               ${/}
    Should Be Equal      ${{round(math.pi, 2)}}    ${3.14}
    Should Start With    ${{robot.__version__}}    4.

A limitation of using modules is that nested modules like rootmod.submod can only be used if the root module automatically imports the submodule. That is not always the case and using such modules is not possible. An concrete example that is relevant in the automation context is the selenium module that is implemented, at least at the time of this writing, so that just importing selenium does not import the selenium.webdriver submodule. Another limitation is that modules cannot be used in the expression part of a list comprehension when using Python 3. A workaround to both of these problems is using the BuiltIn keyword Evaluate that accepts modules to be imported and added to the evaluation namespace as an argument:

*** Test Cases ***
Does not work due to nested module structure
    Log    ${{selenium.webdriver.ChromeOptions()}}

Evaluate keyword with nested module
    ${options} =    Evaluate    selenium.webdriver.ChromeOptions()    modules=selenium.webdriver
    Log    ${options}

Does not work due to list comprehension
    Log    ${{[json.loads(item) for item in ('1', '"b"')]}}

Evaluate keyword with list comprehension
    ${items} =    Evaluate    [json.loads(item) for item in ('1', '"b"')]    modules=json
    Log    ${items}

The Evaluate keyword also supports custom evaluation namespaces if further customization is needed. See its documentation in the BuiltIn library for more details.

6.7.3   Using variables

Normal ${variable} syntax

When a variable is used in the expression using the normal ${variable} syntax, its value is replaced before the expression is evaluated. This means that the value used in the expression will be the string representation of the variable value, not the variable value itself. This is not a problem with numbers and other objects that have a string representation that can be evaluated directly. For example, if we have a return code as an integer in variable ${rc}, using something like ${rc} > 0 is fine.

With other objects the behavior depends on the string representation. Most importantly, strings must always be quoted either with single or double quotes like '${x}', and if they can contain newlines, they must be triple-quoted like '''${x}'''. Strings containing quotes themselves cause additional problems, but triple-quoting typically handles them. Also the backslash character \ is problematic, but can be handled by using Python's raw-string notation like r'${path}'.

*** Test Cases ***
Using normal variable syntax
    Should Be True    ${rc} > 0
    IF    '${status}'.upper() == 'PASS'
        Log    Passed
    END
    IF    'FAIL' in r'''${output}'''
        Log    Output contains FAIL
    END

Special $variable syntax

Quoting strings is not that convenient, but there are cases where replacing the variable with its string representation causes even bigger problems. For example, if the variable value can be either a string or Python None, quoting like '${var}' is needed because otherwise strings do not work, but then None is interpreted to be a string as well. Luckily there is an easy solution to these problems discussed in this section.

Actual variables values are available in the evaluation namespace and can be accessed using special variable syntax without the curly braces like $variable. Such variables should never be quoted, not even if they contain strings.

Compare this these examples with the example in the previous section:

*** Test Cases ***
Using special variable syntax
    Should Be True    $rc > 0
    IF    $status.upper() == 'PASS'
        Log    Passed
    END
    IF    'FAIL' in $output
        Log    Output contains FAIL
    END

Only possible using special variable syntax
    Should Be True    $example is not None
    Should Be True    len($result) > 1 and $result[1] == 'OK'

Using the $variable syntax slows down expression evaluation a little. This should not typically matter, but should be taken into account if complex expressions are evaluated often and there are strict time constrains. Moving such logic to test libraries is typically a good idea anyway.

Note

Due to technical reasons, these special variables are available during evaluation as local variables. That makes them unavailable in non-local scopes such as in the expression part of list comprehensions and inside lambdas.

6.8   Registrations

This appendix lists file extensions, media types, and so on, that are associated with Robot Framework.

6.8.1   Suite file extensions

Suite files with the following extensions are parsed automatically:

.robot
Suite file using the plain text format.
.robot.rst
Suite file using the reStructuredText format.
.rbt
Suite file using the JSON format.

Using other extensions is possible, but it requires separate configuration.

6.8.2   Resource file extensions

Resource files can use the following extensions:

.resource
Recommended when using the plain text format.
.robot, .txt and .tsv
Supported with the plain text format for backwards compatibility reasons. .resource is recommended and may be mandated in the future.
.rst and .rest
Resource file using the reStructuredText format.
.rsrc and .json
Resource file using the JSON format.

6.8.3   Media type

The media type to use with Robot Framework data is text/robotframework.

6.8.4   Remote server port

The default remote server port is 8270. The port has been registered by IANA.